Re: [Xen-devel] Need help in debugging partially blocked hypervisor

[Dietmar Hahn <dietmar.hahn@xxxxxxxxxxxxxx>]

> On 22/10/2009 07:23, "Dietmar Hahn" <dietmar.hahn@xxxxxxxxxxxxxx> wrote:
> 
> > OK, I tried xen-3.4-testing.hg and the system booted fine ;-)
> > Then I did a fresh hg pull from xen-unstable and the boot stopped in
> > the linux kernel.
> > Attached are the loggings from the serial console for both hypervisors.
> 
> Okay, so output just dies early during dom0 boot. I guess if you try the 'd'
> debug key that you get no output from that either (CTRL-a three times
> followed by d)?

Sorry, CTRL-a doesn't work.

> 
> Does xen-unstable work on other machines with that dom0 kernel, do you know?
> It's not at this point clear whether the issue is related to the hardware or
> the particular dom0 kernel.

Yes it works on older machines, I can send you the log.

> 
> If you haven't seen that dom0 kernel work with xen-unstable on any system,
> can I get that dom0 kernel from somewhere to give it a go? Perhaps your
> exact dom0 kernel binary to start with, to make things as close as possibel
> to your setup?

If needed I can put the kernel on an outgoing ftp server.

Dietmar.

-- 
Company details: http://ts.fujitsu.com/imprint.html

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel