[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Re: graphics passthrough with VT-d
Hi Guys,Do you have any success after applying Weidong's gfx passthrough and 1:1 bar mapping patches to xen-unstable? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@xxxxxxxxxxx Alma Maters: Singapore Polytechnic, National University of Singapore On 09/01/2009 01:18 AM, Keir Fraser wrote: This is probably due to c/s 20137 and now fixed by c/s 20141. Thanks, Keir On 31/08/2009 18:03, "djmagee@xxxxxxxxxxxx"<djmagee@xxxxxxxxxxxx> wrote:I had the same problem with unpatched xen-unstable that was up-to-date this morning. This was simply in trying to pass through a usb controller, to test xen-unstable before I went ahead and applied the gfx passthrough patches. This seems like a bug in xen-unstable. -----Original Message----- From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Christian Tramnitz Sent: Monday, August 31, 2009 12:48 PM To: xen-devel@xxxxxxxxxxxxxxxxxxx Subject: [Xen-devel] Re: graphics passthrough with VT-d I took a snapshot from xen-unstable and applied those patches. However when trying to create a HVM domU the following error comes up: # xm create test2.xm Error: local variable 'str' referenced before assignment Using config file "/etc/xen/test2.xm". And xend-debug.log gives some more info: [2009-08-31 18:10:23 6189] DEBUG (XendDomainInfo:99) XendDomainInfo.create(['vm', ['name', 'TEST2'], ['memory', 4096], ['vcpus', 8], ['on_xend_start', 'ignore'], ['on_xend_stop', 'ignore'], ['uuid', '06ed00ff-1162-4fc4-b5d8-11993ee4a8c0'], ['image', ['hvm', ['kernel', '/usr/lib/xen/boot/hvmloader'], ['videoram', 4], ['device_model', '/usr/lib/xen/bin/qemu-dm'], ['pae', 1], ['vcpus', 8], ['boot', 'c'], ['fda', ''], ['fdb', ''], ['timer_mode', 1], ['localtime', 0], ['serial', ''], ['stdvga', 0], ['isa', 0], ['nographic', 0], ['soundhw', ''], ['vncunused', 1], ['display', ':0.0'], ['xauthority', '/root/.xauthPdEBhy'], ['rtc_timeoffset', 0], ['monitor', 0], ['acpi', 1], ['apic', 1], ['usb', 0], ['usbdevice', ''], ['keymap', ''], ['pci', [['0x0000', '0x03', '0x00', '0x0', '0x100', [], '03:00.0']]], ['hpet', 0], ['guest_os_type', 'default'], ['hap', 1], ['cpuid', []], ['cpuid_check', []], ['viridian', 0], ['pci_msitranslate', 1], ['vpt_align', 1], ['pci_power_mgmt', 0], ['xen_platform_pci', 1], ['gfx_passthru', 2]]], ['s3_integrity', 1], ['device', ['vbd', ['uname', 'phy:vgtest/test2'], ['dev', 'xvda'], ['mode', 'w']]], ['device', ['pci', ['dev', ['slot', '0x00'], ['domain', '0x0000'], ['key', '03:00.0'], ['bus', '0x03'], ['vdevfn', '0x100'], ['func', '0x0']]]], ['device', ['vif', ['bridge', 'eth0'], ['mac', '00:16:3e:00:00:22'], ['type', 'netfront']]]]) [2009-08-31 18:10:23 6189] DEBUG (XendDomainInfo:2366) XendDomainInfo.constructDomain [2009-08-31 18:10:23 6189] DEBUG (balloon:181) Balloon: 4101688 KiB free; need 4096; done. [2009-08-31 18:10:23 6189] ERROR (XendDomainInfo:467) VM start failed Traceback (most recent call last): File "/usr/lib/python2.6/site-packages/xen/xend/XendDomainInfo.py", line 452, in start XendTask.log_progress(0, 30, self._constructDomain) File "/usr/lib/python2.6/site-packages/xen/xend/XendTask.py", line 209, in log_progress retval = func(*args, **kwds) File "/usr/lib/python2.6/site-packages/xen/xend/XendDomainInfo.py", line 2470, in _constructDomain pci_str = str(pci) UnboundLocalError: local variable 'str' referenced before assignment Is this error related to the patches or is something else broken? I have to admit that I've not been using xen-unstable for some time, only release-3.4.1 and recently Xenclient, so I don't know if this is also a problem on unpatched xen-unstable. The error disappears when I omit the "pci=" line, but obviously this is not a good scenario to test gfx passthrough ;-) My config file for the test-domU: kernel = "/usr/lib/xen/boot/hvmloader" builder='hvm' memory = 4096 name = "TEST2" vcpus=8 vif = [ 'type=netfront, mac=00:16:3e:ff:ff:22, bridge=eth0' ] disk = [ 'phy:vgtest/test2,xvda,w' ] #viridian = 1 device_model = '/usr/lib/xen/bin/qemu-dm' #boot="cd" #sdl=0 #opengl=0 #vnc=1 #vnclisten="127.0.0.1" #vncdisplay=1 #vncpasswd='' #stdvga=0 gfx_passthru=2 pci=['03:00.0'] Thanks, Christian Han, Weidong wrote:Teo, I attached some experimental patches for you to try to sthorughGeforce8400 GS. Based on my patches posted last Friday, pls follow below instructions: 1. apply xen-load-vbios-file.patch to xen-unstable.hg this patch supports to load vga bios from a file. 2. apply xen-vBAR-pBAR.patch to xen-unstable.hg this patch is used to 1:1 map between vBAR and pBAR 3. apply qemu-change-for-vBAR-pBAR.patch to ioemu-remote (qemu tree). this patch is used to 1:1 map between vBAR and pBAR on qemu side 4. apply qemu-claim-cycle-for-secondary-gfx-passthrough.patch it's needed if you want to assign the secondary gfx to guest. 5. cd xen-unstable.hg 6. make clean 7. copy the vga bios file to xen-unstabl.hg/tools/firmware/vgabios/vgabios-pt.bin 8. make; make install 9. reboot the system. or xend restart. then passthrough gfx to guest...Regards, Weidong_______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |