Hmm could you try without the path, so "find menu.lst" only ?
No errors in xend.log / xm dmesg / dmesg about the disk image ?
Thursday, July 23, 2009, 7:46:43 PM, you wrote:
> Hi Sander
> I tried the find command in the grubdom prompt. Here are the
results.
> GNU GRUB version 0.97 (2097152K lower / 0K upper
memory)
> [ Minimal BASH-like line editing
is supported. For
> the first
word, TAB lists possible command
> completions.
Anywhere else TAB lists the possible
> completions of a
device/filename. ]
grubdom>>
grubdom>> find /boot/gr
> Error 21: Selected disk does not exist
grubdom>> find /boot/grub/menu.lst
> Error 15: File not found
grubdom>> find /boot/vmlinuz
> Error 21: Selected disk does not exist
grubdom>> find /boot/vmlinuz*
> Error 15: File not found
grubdom>>
> My domU config is
> name="ga-nfs-Centos-4.7-Paravirtualized"
> memory=2048
> disk = ['file:/home/enming/ga-nfs.img,xvda,w' ]
> vif = [ 'bridge=eth0' ]
> vfb = [ 'type=vnc']
> vcpus=2
> kernel = '/usr/lib/xen/boot/pv-grub-x86_32.gz'
> extra = '(hd0,0)/boot/grub/menu.lst'
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@xxxxxxxxxxx
> -----Original Message-----
> From: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>
> To: "Teo En Ming" <enming.teo@xxxxxxxxxxxxxxx>
> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx,
jeremy.fitzhardinge@xxxxxxxxxx
> Date: Thu, 23 Jul 2009 19:45:05 +0200
> Subject: Re[6]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS
> Kernel
> Hmm hard to say if things are correct, since i can't see if
and how thing
> are partitioned in the .img file.
> Could be the hd(0,0) is not correct.
> You could try to find out if things are correct by using the
"find" option
> from the grubdom prompt and try to find the "menu.lst" and
or the
> vmlinuz........ file.
> It should return the right hd(?,?) to use.
> Thursday, July 23, 2009, 7:17:35 PM, you wrote:
>> Nope, just a grubdom prompt.
>> PV-grub config for domU is:
>> name="ga-nfs-Centos-4.7-Paravirtualized"
>> memory=2048
>> disk = ['file:/home/enming/ga-nfs.img,xvda,w' ]
>> vif = [ 'bridge=eth0' ]
>> vfb = [ 'type=vnc']
>> vcpus=2
>> kernel = '/usr/lib/xen/boot/pv-grub-x86_32.gz'
>> extra = '(hd0,0)/boot/grub/menu.lst'
>> #bootloader = "/usr/bin/pygrub"
>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering)
>> BEng(Hons)(Mechanical Engineering)
>> Technical Support Engineer
>> Information Technology Department
>>
>> Asiasoft Online Pte Ltd
>>
>> Tampines Central 1 #04-01 Tampines Plaza
>>
>> Singapore 529541
>> Republic of Singapore
>>
>> Mobile Phone: +65-9648-9798
>>
>> MSN: teoenming@xxxxxxxxxxx
>> -----Original Message-----
>> From: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>
>> To: "Teo En Ming" <enming.teo@xxxxxxxxxxxxxxx>
>> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx,
jeremy.fitzhardinge@xxxxxxxxxx
>> Date: Thu, 23 Jul 2009 19:23:41 +0200
>> Subject: Re[4]: [Xen-devel] Unable to Configure Xen Dom
0 in Jeremy's
> PVOPS
>> Kernel
>> No errors/messages from grub ?
>> What is in your domU config file ?
>> Thursday, July 23, 2009, 7:06:30 PM, you wrote:
>>> I switched to using PV-Grub and used xm create -c to
start the guest
>> domain.
>>> However, all I get is a grubdom prompt.
>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering)
>>> BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>>
>>> Asiasoft Online Pte Ltd
>>>
>>> Tampines Central 1 #04-01 Tampines Plaza
>>>
>>> Singapore 529541
>>> Republic of Singapore
>>>
>>> Mobile Phone: +65-9648-9798
>>>
>>> MSN: teoenming@xxxxxxxxxxx
>>> -----Original Message-----
>>> From: "Teo En Ming"
<enming.teo@xxxxxxxxxxxxxxx>
>>> To: "Teo En Ming"
<enming.teo@xxxxxxxxxxxxxxx>, "Sander Eikelenboom"
>>> <linux@xxxxxxxxxxxxxx>
>>> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx,
jeremy.fitzhardinge@xxxxxxxxxx
>>> Date: Fri, 24 Jul 2009 01:03:35 +0800
>>> Subject: Re: Re[2]: [Xen-devel] Unable to Configure
Xen Dom 0 in Jeremy's
>>> PVOPS Kernel
>>> Hi Sander
>>> I added boot to kernel and initrd in the grub config
of the centos 4.7
>>> pv guest but it still doesn't work.
>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering)
>>> BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>>
>>> Asiasoft Online Pte Ltd
>>>
>>> Tampines Central 1 #04-01 Tampines Plaza
>>>
>>> Singapore 529541
>>> Republic of Singapore
>>>
>>> Mobile Phone: +65-9648-9798
>>>
>>> MSN: teoenming@xxxxxxxxxxx
>>> -----Original
>>> Message-----
>>>
>>> From: "Teo En Ming"
<enming.teo@xxxxxxxxxxxxxxx>
>>>
>>> To: "Sander Eikelenboom"
<linux@xxxxxxxxxxxxxx>
>>>
>>> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx,
jeremy.fitzhardinge@xxxxxxxxxx
>>>
>>> Date: Fri, 24 Jul 2009 00:44:58 +0800
>>>
>>> Subject: Re: Re[2]: [Xen-devel] Unable to
Configure Xen Dom 0 in
>>> Jeremy's PVOPS Kernel
>>>
>>>
>>> Hi Sander,
>>>
>>>
>>> The grub config in the centos 4.7 pv guest was
automatically added by
>>> centos installer.
>>>
>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering)
>>> BEng(Hons)(Mechanical Engineering)
>>>
>>> Technical Support Engineer
>>>
>>> Information Technology Department
>>>
>>> Asiasoft Online Pte Ltd
>>>
>>> Tampines Central 1 #04-01 Tampines Plaza
>>>
>>> Singapore 529541
>>>
>>> Republic of Singapore
>>>
>>> Mobile Phone: +65-9648-9798
>>>
>>> MSN: teoenming@xxxxxxxxxxx
>>>
>>>
>>> -----Original
>>> Message-----
>>>
>>> From: Sander Eikelenboom
<linux@xxxxxxxxxxxxxx>
>>>
>>> To: "Teo En Ming"
<enming.teo@xxxxxxxxxxxxxxx>
>>>
>>> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx,
jeremy.fitzhardinge@xxxxxxxxxx
>>>
>>> Date: Thu, 23 Jul 2009 18:40:48 +0200
>>>
>>> Subject: Re[2]: [Xen-devel] Unable to
Configure Xen Dom 0 in
>>> Jeremy's PVOPS Kernel
>>>
>>>
>>>
>>> Hello Teo,
>>>
>>>
>>> Are you sure the path in your grub menu is
correct ?
>>>
>>> Shouldn't you add /boot infront of vmlinuz and
initrd ?
>>>
>>>
>>> Regards,
>>>
>>>
>>> Sander
>>>
>>>
>>> Thursday, July 23, 2009, 6:13:02 PM, you
wrote:
>>>
>>>
>>>> Hi!!!
>>>
>>>
>>>> I have managed to install CentOS 4.7
paravirtualized guest
>>> on Xen Dom 0
>>>
>>>> Jeremy Fitzhardinge's pv_ops kernel
successfully. Please
>>> see screenshots
>>>
>>>> here:
>>>
>>>>
>>>
>>
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
> [
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
]
>>
> [
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
> [
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
]]
>>>
>>
> [
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
> [
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
]
>>
> [
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
> [
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
]]]
>>>
>>>
>>>> However, after installation of CentOS 4.7
PV, I can't
>>> start the guest
>>>
>>>> domain.
>>>
>>>
>>>> I have tried to mount/access the CentOS
4.7 guest disk
>>> image file and found
>>>
>>>> out that xenU (xen-aware) kernel and
initial ramdisk
>>> images were installed.
>>>
>>>> PV Guest GRUB was also configured to boot
the xenU kernel.
>>> Please see
>>>
>>>> screenshot:
>>>
>>>>
>>>
>>
>
http://1.bp.blogspot.com/_zzjv8MCM2sk/SmiMcYsFzAI/AAAAAAAAACk/rYxOFDHuD00/s1600-h/xen18.jpeg
> [
http://1.bp.blogspot.com/_zzjv8MCM2sk/SmiMcYsFzAI/AAAAAAAAACk/rYxOFDHuD00/s1600-h/xen18.jpeg
]
>>
> [
http://1.bp.blogspot.com/_zzjv8MCM2sk/SmiMcYsFzAI/AAAAAAAAACk/rYxOFDHuD00/s1600-h/xen18.jpeg
> [
http://1.bp.blogspot.com/_zzjv8MCM2sk/SmiMcYsFzAI/AAAAAAAAACk/rYxOFDHuD00/s1600-h/xen18.jpeg
]]
>>>
>>
> [
http://1.bp.blogspot.com/_zzjv8MCM2sk/SmiMcYsFzAI/AAAAAAAAACk/rYxOFDHuD00/s1600-h/xen18.jpeg
> [
http://1.bp.blogspot.com/_zzjv8MCM2sk/SmiMcYsFzAI/AAAAAAAAACk/rYxOFDHuD00/s1600-h/xen18.jpeg
]
>>
> [
http://1.bp.blogspot.com/_zzjv8MCM2sk/SmiMcYsFzAI/AAAAAAAAACk/rYxOFDHuD00/s1600-h/xen18.jpeg
> [
http://1.bp.blogspot.com/_zzjv8MCM2sk/SmiMcYsFzAI/AAAAAAAAACk/rYxOFDHuD00/s1600-h/xen18.jpeg
]]]
>>>
>>>
>>>> My CentOS 4.7 PV guest domain
configuration is as follows:
>>>
>>>
>>>>
>>>
>>
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/SmiMcrnOfEI/AAAAAAAAACs/s-xguFnf25U/s1600-h/xen19.jpeg
> [
http://3.bp.blogspot.com/_zzjv8MCM2sk/SmiMcrnOfEI/AAAAAAAAACs/s-xguFnf25U/s1600-h/xen19.jpeg
]
>>
> [
http://3.bp.blogspot.com/_zzjv8MCM2sk/SmiMcrnOfEI/AAAAAAAAACs/s-xguFnf25U/s1600-h/xen19.jpeg
> [
http://3.bp.blogspot.com/_zzjv8MCM2sk/SmiMcrnOfEI/AAAAAAAAACs/s-xguFnf25U/s1600-h/xen19.jpeg
]]
>>>
>>
> [
http://3.bp.blogspot.com/_zzjv8MCM2sk/SmiMcrnOfEI/AAAAAAAAACs/s-xguFnf25U/s1600-h/xen19.jpeg
> [
http://3.bp.blogspot.com/_zzjv8MCM2sk/SmiMcrnOfEI/AAAAAAAAACs/s-xguFnf25U/s1600-h/xen19.jpeg
]
>>
> [
http://3.bp.blogspot.com/_zzjv8MCM2sk/SmiMcrnOfEI/AAAAAAAAACs/s-xguFnf25U/s1600-h/xen19.jpeg
> [
http://3.bp.blogspot.com/_zzjv8MCM2sk/SmiMcrnOfEI/AAAAAAAAACs/s-xguFnf25U/s1600-h/xen19.jpeg
]]]
>>>
>>>
>>>> Any idea why I can't start the CentOS 4.7
PV guest after
>>> installation? Is
>>>
>>>> the guest domain configuration
correct/sufficient? Please
>>> advise.
>>>
>>>
>>>> Thank you!!!
>>>
>>>
>>>> Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics
>>> Engineering)
>>>
>>>> BEng(Hons)(Mechanical Engineering)
>>>
>>>
>>>> Technical Support Engineer
>>>
>>>
>>>> Information Technology Department
>>>
>>>>
>>>
>>>> Asiasoft Online Pte Ltd
>>>
>>>>
>>>
>>>> Tampines Central 1 #04-01 Tampines Plaza
>>>
>>>>
>>>
>>>> Singapore 529541
>>>
>>>
>>>> Republic of Singapore
>>>
>>>>
>>>
>>>> Mobile Phone: +65-9648-9798
>>>
>>>>
>>>
>>>> MSN: teoenming@xxxxxxxxxxx
>>>
>>>
>>>
>>>> -----Original Message-----
>>>
>>>
>>>> From: "Teo En Ming"
<enming.teo@xxxxxxxxxxxxxxx>
>>>
>>>
>>>> To: "Pasi Kärkkäinen"
<pasik@xxxxxx>
>>>
>>>
>>>> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx,
>>> jeremy.fitzhardinge@xxxxxxxxxx
>>>
>>>
>>>> Date: Thu, 23 Jul 2009 19:52:23 +0800
>>>
>>>
>>>> Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in
>>> Jeremy's PVOPS
>>>
>>>> Kernel
>>>
>>>
>>>
>>>
>>>
>>>> Dear Pasi,
>>>
>>>
>>>
>>>
>>>> Thank you!!!
>>>
>>>
>>>
>>>
>>>> I am now creating a virtual harddisk for
my Xen virtual
>>> machine.
>>>
>>>> Creating a 146 GB virtual harddisk:
>>>
>>>
>>>
>>>
>>>> # dd if=/dev/zero
of=/home/enming/ga-nfs.img bs=1M
>>> count=149504
>>>
>>>
>>>
>>>
>>>> I am going to run CentOS 4.7 32-bit linux
on it!
>>>
>>>
>>>> Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics
>>> Engineering)
>>>
>>>> BEng(Hons)(Mechanical Engineering)
>>>
>>>
>>>> Technical Support Engineer
>>>
>>>
>>>> Information Technology Department
>>>
>>>>
>>>
>>>> Asiasoft Online Pte Ltd
>>>
>>>>
>>>
>>>> Tampines Central 1 #04-01 Tampines Plaza
>>>
>>>>
>>>
>>>> Singapore 529541
>>>
>>>
>>>> Republic of Singapore
>>>
>>>>
>>>
>>>> Mobile Phone: +65-9648-9798
>>>
>>>>
>>>
>>>> MSN: teoenming@xxxxxxxxxxx
>>>
>>>
>>>
>>>
>>>> -----Original
>>>
>>>> Message-----
>>>
>>>>
>>>
>>>> From: Pasi Kärkkäinen
<pasik@xxxxxx>
>>>
>>>>
>>>
>>>> To: Teo En Ming
<enming.teo@xxxxxxxxxxxxxxx>
>>>
>>>>
>>>
>>>> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx,
>>> jeremy.fitzhardinge@xxxxxxxxxx
>>>
>>>>
>>>
>>>> Date: Thu, 23 Jul 2009 13:41:28
+0300
>>>
>>>>
>>>
>>>> Subject: Re: [Xen-devel] Unable to
Configure Xen Dom
>>> 0 in Jeremy's
>>>
>>>> PVOPS Kernel
>>>
>>>>
>>>
>>>
>>>>
>>>
>>>
>>>>
>>>
>>>> On Thu, Jul 23,
>>>
>>>> 2009 at 06:25:33PM +0800, Teo En Ming
wrote:
>>>
>>>>
>>>
>>>>> Dear Pasi,
>>>
>>>>
>>>
>>>>>
>>>
>>>>
>>>
>>>>> I ran "mount /proc/xen" manually
*after* the
>>> system booted
>>>
>>>> up, it read
>>>
>>>>
>>>
>>>>> /etc/fstab, and mounted /proc/xen
>>> successfully!!!
>>>
>>>>
>>>
>>>>>
>>>
>>>>
>>>
>>>>> Please see the last line of the
following
>>> "mount" output:
>>>
>>>>
>>>
>>>>>
>>>
>>>>
>>>
>>>>> /dev/sda2 on / type ext3
(rw,acl,user_xattr)
>>>
>>>>
>>>
>>>>> /proc on /proc type proc (rw)
>>>
>>>>
>>>
>>>>> sysfs on /sys type sysfs (rw)
>>>
>>>>
>>>
>>>>> debugfs on /sys/kernel/debug type
debugfs (rw)
>>>
>>>>
>>>
>>>>> udev on /dev type tmpfs (rw)
>>>
>>>>
>>>
>>>>> devpts on /dev/pts type devpts
>>> (rw,mode=0620,gid=5)
>>>
>>>>
>>>
>>>>> /dev/sda3 on /home type ext3
(rw,acl,user_xattr)
>>>
>>>>
>>>
>>>>> fusectl on /sys/fs/fuse/connections
type fusectl
>>> (rw)
>>>
>>>>
>>>
>>>>> none on /proc/sys/fs/binfmt_misc type
>>> binfmt_misc (rw)
>>>
>>>>
>>>
>>>>> gvfs-fuse-daemon on
/home/enming/.gvfs type
>>>
>>>> fuse.gvfs-fuse-daemon
>>>
>>>>
>>>
>>>>> (rw,nosuid,nodev,user=enming)
>>>
>>>>
>>>
>>>>> none on /proc/xen type xenfs (rw)
>>>
>>>>
>>>
>>>>>
>>>
>>>>
>>>
>>>
>>>>
>>>
>>>> Yep, now it's mounted :)
>>>
>>>>
>>>
>>>
>>>>
>>>
>>>>> It is very strange that the system
did not mount
>>> /proc/xen
>>>
>>>> automatically as
>>>
>>>>
>>>
>>>>> indicated in /etc/fstab during
bootup.
>>>
>>>>
>>>
>>>>>
>>>
>>>>
>>>
>>>
>>>>
>>>
>>>> Indeed.
>>>
>>>>
>>>
>>>
>>>>
>>>
>>>>> Now I am able to start xend daemon.
Please see
>>>
>>>>
>>>
>>>>>
>>>
>>>>
>>>
>>
>
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
]
>>
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
]]
>>>
>>
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
]
>>
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
]]]
>>>
>>>>
>>>
>>
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
]
>>
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
]]
>>>
>>
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
]
>>
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
> [
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
]]]
>>> ]
>>>
>>>
>>>>
>>>
>>>>>
>>>
>>>>
>>>
>>>>> And I can see domain 0 using the "xm
list"
>>> command already!
>>>
>>>>
>>>
>>>>>
>>>
>>>>
>>>
>>>
>>>>
>>>
>>>> Congrats! :)
>>>
>>>>
>>>
>>>
>>>>
>>>
>>>>> Any ideas how to make /proc/xen
automatically
>>> mounted while
>>>
>>>> booting? I
>>>
>>>>
>>>
>>>>> thought I already have the xenfs
entry in
>>> /etc/fstab.
>>>
>>>>
>>>
>>>>>
>>>
>>>>
>>>
>>>>>
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part1
>>> swap
>>>
>>>>
swap
>>>
>>>
>>>>
>>>
>>>>> defaults
>>>
>>>
>>>> 0 0
>>>
>>>>
>>>
>>>>>
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part2 /
>>>
>>>
>>>>
>>> ext3
>>>
>>>>
>>>
>>>>
>>>
>>>>> acl,user_xattr
>>> 1 1
>>>
>>>>
>>>
>>>>>
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part3
>>> /home
>>>
>>>>
ext3
>>>
>>>
>>>>
>>>
>>>>> acl,user_xattr
>>> 1 2
>>>
>>>>
>>>
>>>>> proc
>>>
>>>
>>>> /proc
>>> proc
>>>
>>>> defaults
>>> 0
>>>
>>>>
>>>
>>>>> 0
>>>
>>>>
>>>
>>>>> sysfs
>>>
>>>
>>>> /sys
>>> sysfs
>>>
>>>> noauto
>>>
>>>
>>>> 0
>>>
>>>>
>>>
>>>>> 0
>>>
>>>>
>>>
>>>>> debugfs
>>>
>>>
>>>> /sys/kernel/debug
debugfs
>>> noauto
>>>
>>>>
0
>>>
>>>>
>>>
>>>>> 0
>>>
>>>>
>>>
>>>>> devpts
>>>
>>>
>>>> /dev/pts
devpts
>>>
>>>
>>>> mode=0620,gid=5 0
>>>
>>>>
>>>
>>>>> 0
>>>
>>>>
>>>
>>>>> none
>>>
>>>
>>>> /proc/xen
xenfs
>>>
>>>
>>>> defaults
>>> 0
>>>
>>>>
>>>
>>>>> 0
>>>
>>>>
>>>
>>>>>
>>>
>>>>
>>>
>>>>> Seems the initscripts did not attempt
to mount
>>> /proc/xen
>>>
>>>> during system
>>>
>>>>
>>>
>>>>> startup.
>>>
>>>>
>>>
>>>>>
>>>
>>>>
>>>
>>>
>>>>
>>>
>>>> That's weird.. it should be mounted
automatically
>>> when it's in
>>>
>>>> fstab.
>>>
>>>>
>>>
>>>> Maybe it's because sysfs /sys is
'noauto'? Try to
>>> change that to
>>>
>>>> 'defaults'.
>>>
>>>>
>>>
>>>
>>>>
>>>
>>>>> Or should I put "mount /proc/xen" in
>>> /etc/rc.local?
>>>
>>>>
>>>
>>>>>
>>>
>>>>
>>>
>>>
>>>>
>>>
>>>> That shouldn't be necessary.
>>>
>>>>
>>>
>>>
>>>>
>>>
>>>> -- Pasi
>>>
>>>>
>>>
>>>
>>>>
>>>
>>>>
_______________________________________________
>>>
>>>>
>>>
>>>> Xen-devel mailing list
>>>
>>>>
>>>
>>>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>>>
>>>>
>>>
>>>>
http://lists.xensource.com/xen-devel
> [
http://lists.xensource.com/xen-devel]
>> [
http://lists.xensource.com/xen-devel
> [
http://lists.xensource.com/xen-devel]]
>>> [
http://lists.xensource.com/xen-devel
> [
http://lists.xensource.com/xen-devel]
>> [
http://lists.xensource.com/xen-devel
> [
http://lists.xensource.com/xen-devel]]]
>>>
>>>> [
http://lists.xensource.com/xen-devel
> [
http://lists.xensource.com/xen-devel]
>> [
http://lists.xensource.com/xen-devel
> [
http://lists.xensource.com/xen-devel]]
>>> [
http://lists.xensource.com/xen-devel
> [
http://lists.xensource.com/xen-devel]
>> [
http://lists.xensource.com/xen-devel
> [
http://lists.xensource.com/xen-devel]]]]
>>>
>>>
>>>
>>>
>>> --
>>>
>>> Best regards,
>>>
>>> Sander
>>>
mailto:linux@xxxxxxxxxxxxxx
>>>
>>>
>>>
>>>
_______________________________________________
>>>
>>> Xen-devel mailing list
>>>
>>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>>>
>>>
http://lists.xensource.com/xen-devel
> [
http://lists.xensource.com/xen-devel]
>> [
http://lists.xensource.com/xen-devel
> [
http://lists.xensource.com/xen-devel]]
>>> [
http://lists.xensource.com/xen-devel
> [
http://lists.xensource.com/xen-devel]
>> [
http://lists.xensource.com/xen-devel
> [
http://lists.xensource.com/xen-devel]]]
--
Best regards,
Sander
mailto:linux@xxxxxxxxxxxxxx
