|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [Patch][2/2][BIOS] Support BCV table
Hi, Akio Takebe wrote: >>> On 27/03/2009 00:48, "Akio Takebe" <takebe_akio@xxxxxxxxxxxxxx> wrote: >>> >>>>> You want qemu mucking about with the hvm_info_table? I don't think so. >>>>> You'll have to consider an approach which doesn't touch qemu - you have >>>>> some >>>>> time anyway since this is not going in for 3.4. >>>> I didn't want to modify qemu, but virtual slot is decided in qemu. >>>> Most of my patch modify hw/pass-through.c >>>> Because hw/pass-though.c is used by only xen, >>>> I though it was accectable to modify it. >>>> So I modified qemu involuntarily. I'm sorry. >>>> If we don't modify qemu, we need to see xenstore and so on >>>> from hvmloader. Do you have any idea? >>> I may be missing some of the motivation and higher-level design, which you >>> may have to describe. I'm not really sure what the whole patchset was >>> actually for and why we'd want it. >>> >> I have two problems. >> 1. We cannot load many optionROM >> In the case of a native PnP BIOS, it load a optionROM and >> try to initialize their device, then it can free unnecessary ROM >> memory. So a native BIOS can load many optionROM. >> But in the case of xen, optionROMs are loaded in hvmloader. >> So we cannot free unnecessary memory. >> Current hvmloader try to load all of optionROM, But if shadow memory >> doesn't have enough space, it stop loading optionROM. >> So I wanted to load some necessary optionROM for booting. >> As the side effect, the patch make booting faster if you don't want to >> boot from pass-through device. >> I think it is not important problem. >> We can configure bootable devices with early number of vslot. >> >> 2. We cannot retry the next drive of HDD type. >> rombios try to boot from only 0x80 drive. >> So rombios cannot retry to boot with other drives. >> I want to boot from other drive. >> It is useful when the first drive(0x80) broke. >> Also if acceptable, I want to implement interactive boot key >> for pass-through device. >> >>> But, for example, why not specify the vendor:dev identifier via >>> hvm_info_table, rather than specifying the vslot? >> Oh, I didn't have the idea. I'll try it. >> > I don't try the idea of vendor:dev id, but I made a patch(bcv.v2.patch) > adding the feature of retrying to boot with the next drives. > What do you think about this patch? > This patch doesn't add any new syntax, just add the retry feature. > > Also I made another patch(support_interactive_boot_for_bcv.patch). > It allows user to select a bootable pass-through device with F12. > support_interactive_boot_for_bcv.patch depends on bcv.v2.patch. > Just RFC. I made a patch which we can select bootable devices with vendor_id:device_id. It depends on previous 2 patches(bcv.v2.patch, support_interactive_boot_for_bcv.patch). If acceptable, I will remake, cleanup and post them after xen-3.5. Best Regards, Akio Takebe diff -r b6cf416223e3 tools/firmware/hvmloader/hvmloader.c
--- a/tools/firmware/hvmloader/hvmloader.c Fri Mar 27 19:44:05 2009 +0900
+++ b/tools/firmware/hvmloader/hvmloader.c Mon Mar 30 15:42:08 2009 +0900
@@ -478,6 +478,8 @@
uint32_t option_rom_addr, rom_phys_addr = rom_base_addr;
uint16_t vendor_id, device_id;
uint8_t devfn, class;
+ uint32_t i, found;
+ uint32_t vendev;
for ( devfn = 0; devfn < 128; devfn++ )
{
@@ -487,6 +489,22 @@
if ( (vendor_id == 0xffff) && (device_id == 0xffff) )
continue;
+
+ found = 0;
+ for ( i = 0; i < 4 ; i++ ) {
+ vendev = hvm_info->pci_vd[i];
+ if ( vendev == 0 )
+ continue;
+ if ( (vendor_id == (vendev>>16&0xffff)) && (device_id ==
(vendev&0xffff)) ){
+ found = 1;
+ break;
+ }
+ }
+
+ if ( found == 0 )
+ continue;
+ else
+ printf("vendor=%x device=%x \n", ((vendev>>16)&0xffff),
vendev&0xffff);
/*
* Currently only scan options from mass storage devices and serial
diff -r b6cf416223e3 tools/libxc/xc_hvm_build.c
--- a/tools/libxc/xc_hvm_build.c Fri Mar 27 19:44:05 2009 +0900
+++ b/tools/libxc/xc_hvm_build.c Mon Mar 30 15:42:08 2009 +0900
@@ -30,12 +30,37 @@
#define NR_SPECIAL_PAGES 5
#define special_pfn(x) (0xff000u - NR_SPECIAL_PAGES + (x))
-static void build_hvm_info(void *hvm_info_page, uint64_t mem_size)
+static int token_value(char *token)
+{
+ token = strchr(token, 'x') + 1;
+ return strtol(token, NULL, 16);
+}
+
+static int next_vd(char **str, int *vendor, int *device)
+{
+ char *token;
+
+ if ( !(*str) || !strchr(*str, ',') )
+ return 0;
+
+ token = *str;
+ *vendor = token_value(token);
+ token = strchr(token, ',') + 1;
+ *device = token_value(token);
+ token = strchr(token, ',');
+ *str = token ? token + 1 : NULL;
+
+ return 1;
+}
+
+static void build_hvm_info(void *hvm_info_page, uint64_t mem_size, char
*pci_str)
{
struct hvm_info_table *hvm_info = (struct hvm_info_table *)
(((unsigned char *)hvm_info_page) + HVM_INFO_OFFSET);
uint64_t lowmem_end = mem_size, highmem_end = 0;
uint8_t sum;
+ uint32_t vd = 0;
+ int vendor, device;
int i;
if ( lowmem_end > HVM_BELOW_4G_RAM_END )
@@ -60,10 +85,24 @@
hvm_info->high_mem_pgend = highmem_end >> PAGE_SHIFT;
hvm_info->reserved_mem_pgstart = special_pfn(0);
+ /* bootable pass-through devices */
+ i = 0;
+ while ( next_vd(&pci_str, &vendor, &device) )
+ {
+ vd |= (vendor & 0xffff) << 16;
+ vd |= (device & 0xffff) ;
+ hvm_info->pci_vd[i] = vd;
+ vd = 0;
+ i++;
+ if ( i == 4 )
+ break;
+ }
+
/* Finish with the checksum. */
for ( i = 0, sum = 0; i < hvm_info->length; i++ )
sum += ((uint8_t *)hvm_info)[i];
hvm_info->checksum = -sum;
+
}
static int loadelfimage(
@@ -102,7 +141,8 @@
static int setup_guest(int xc_handle,
uint32_t dom, int memsize, int target,
- char *image, unsigned long image_size)
+ char *image, unsigned long image_size,
+ char *pci)
{
xen_pfn_t *page_array = NULL;
unsigned long i, nr_pages = (unsigned long)memsize << (20 - PAGE_SHIFT);
@@ -132,6 +172,8 @@
elf_parse_binary(&elf);
v_start = 0;
v_end = (unsigned long long)memsize << 20;
+
+ PERROR("%s: BBB pci=%s\n",__func__, pci);
if ( xc_version(xc_handle, XENVER_capabilities, &caps) != 0 )
{
@@ -248,7 +290,7 @@
xc_handle, dom, PAGE_SIZE, PROT_READ | PROT_WRITE,
HVM_INFO_PFN)) == NULL )
goto error_out;
- build_hvm_info(hvm_info_page, v_end);
+ build_hvm_info(hvm_info_page, v_end, pci);
munmap(hvm_info_page, PAGE_SIZE);
/* Map and initialise shared_info page. */
@@ -325,21 +367,25 @@
free(page_array);
return -1;
}
+extern FILE *xc_dom_logfile;
+extern void xc_dom_loginit(void);
static int xc_hvm_build_internal(int xc_handle,
uint32_t domid,
int memsize,
int target,
char *image,
- unsigned long image_size)
+ unsigned long image_size,
+ char *pci)
{
+ xc_dom_loginit();
if ( (image == NULL) || (image_size == 0) )
{
ERROR("Image required");
return -1;
}
- return setup_guest(xc_handle, domid, memsize, target, image, image_size);
+ return setup_guest(xc_handle, domid, memsize, target, image, image_size,
pci);
}
static inline int is_loadable_phdr(Elf32_Phdr *phdr)
@@ -364,7 +410,7 @@
((image = xc_read_image(image_name, &image_size)) == NULL) )
return -1;
- sts = xc_hvm_build_internal(xc_handle, domid, memsize, memsize, image,
image_size);
+ sts = xc_hvm_build_internal(xc_handle, domid, memsize, memsize, image,
image_size, NULL);
free(image);
@@ -381,7 +427,8 @@
uint32_t domid,
int memsize,
int target,
- const char *image_name)
+ const char *image_name,
+ char *pci)
{
char *image;
int sts;
@@ -391,7 +438,7 @@
((image = xc_read_image(image_name, &image_size)) == NULL) )
return -1;
- sts = xc_hvm_build_internal(xc_handle, domid, memsize, target, image,
image_size);
+ sts = xc_hvm_build_internal(xc_handle, domid, memsize, target, image,
image_size, pci);
free(image);
@@ -427,7 +474,7 @@
}
sts = xc_hvm_build_internal(xc_handle, domid, memsize, memsize,
- img, img_len);
+ img, img_len, NULL);
/* xc_inflate_buffer may return the original buffer pointer (for
for already inflated buffers), so exercise some care in freeing */
diff -r b6cf416223e3 tools/libxc/xenguest.h
--- a/tools/libxc/xenguest.h Fri Mar 27 19:44:05 2009 +0900
+++ b/tools/libxc/xenguest.h Mon Mar 30 15:42:08 2009 +0900
@@ -134,7 +134,8 @@
uint32_t domid,
int memsize,
int target,
- const char *image_name);
+ const char *image_name,
+ char *pci);
int xc_hvm_build_mem(int xc_handle,
uint32_t domid,
diff -r b6cf416223e3 tools/python/xen/lowlevel/xc/xc.c
--- a/tools/python/xen/lowlevel/xc/xc.c Fri Mar 27 19:44:05 2009 +0900
+++ b/tools/python/xen/lowlevel/xc/xc.c Mon Mar 30 15:42:08 2009 +0900
@@ -891,20 +891,21 @@
#endif
char *image;
int memsize, target=-1, vcpus = 1, acpi = 0, apic = 1;
+ char *pci;
static char *kwd_list[] = { "domid",
"memsize", "image", "target", "vcpus", "acpi",
- "apic", NULL };
- if ( !PyArg_ParseTupleAndKeywords(args, kwds, "iis|iiii", kwd_list,
+ "apic", "pci", NULL };
+ if ( !PyArg_ParseTupleAndKeywords(args, kwds, "iis|iiiis", kwd_list,
&dom, &memsize, &image, &target, &vcpus,
- &acpi, &apic) )
+ &acpi, &apic, &pci) )
return NULL;
if ( target == -1 )
target = memsize;
if ( xc_hvm_build_target_mem(self->xc_handle, dom, memsize,
- target, image) != 0 )
+ target, image, pci) != 0 )
return pyxc_error_to_exception();
#if !defined(__ia64__)
diff -r b6cf416223e3 tools/python/xen/xend/image.py
--- a/tools/python/xen/xend/image.py Fri Mar 27 19:44:05 2009 +0900
+++ b/tools/python/xen/xend/image.py Mon Mar 30 15:42:08 2009 +0900
@@ -41,6 +41,7 @@
from xen.xend import XendOptions
from xen.util import oshelp
from xen.util import utils
+from xen.util import pci as PciUtil
from xen.xend import osdep
xc = xen.lowlevel.xc.xc()
@@ -49,6 +50,34 @@
sentinel_path_prefix = '/var/run/xend/dm-'
sentinel_fifos_inuse = { }
+
+def comma_sep_kv_to_dict(c):
+ """Convert comma-separated, equals-separated key-value pairs into a
+ dictionary.
+ """
+ d = {}
+ c = c.strip()
+ if len(c) > 0:
+ a = c.split(',')
+ for b in a:
+ if b.find('=') == -1:
+ err("%s should be a pair, separated by an equals sign." % b)
+ (k, v) = b.split('=', 1)
+ k = k.strip()
+ v = v.strip()
+ d[k] = v
+ log.debug("AAA: d = %s " % d.keys())
+ return d
+
+def parse_hex(val):
+ try:
+ if isinstance(val, types.StringTypes):
+ return int(val, 16)
+ else:
+ return val
+ except ValueError:
+ return None
+
def cleanup_stale_sentinel_fifos():
for path in glob.glob(sentinel_path_prefix + '*.fifo'):
@@ -741,6 +770,7 @@
self.apic = int(vmConfig['platform'].get('apic', 0))
self.acpi = int(vmConfig['platform'].get('acpi', 0))
self.guest_os_type = vmConfig['platform'].get('guest_os_type')
+ self.pci = vmConfig['platform'].get('pci')
# Return a list of cmd line args to the device models based on the
@@ -839,6 +869,8 @@
memmax_mb = self.getRequiredMaximumReservation() / 1024
mem_mb = self.getRequiredInitialReservation() / 1024
+ pci_str = ""
+ PciUtil.create_lspci_info()
log.debug("domid = %d", self.vm.getDomid())
log.debug("image = %s", self.loader)
@@ -848,6 +880,15 @@
log.debug("vcpus = %d", self.vm.getVCpuCount())
log.debug("acpi = %d", self.acpi)
log.debug("apic = %d", self.apic)
+ log.debug(self.pci)
+ for (d, b, s, f, vslot, opts) in self.pci:
+ dic = comma_sep_kv_to_dict(opts)
+ if 'boot' in dic.keys():
+ if int(dic['boot'],10) > 0:
+ pci_dev = PciUtil.PciDevice(int(d, 16), int(b, 16), int(s,
16), int(f, 16))
+ pci_str += "%s,%s" % (hex(pci_dev.vendor),
hex(pci_dev.device))
+
+ log.debug("pci_str = %s", pci_str)
rc = xc.hvm_build(domid = self.vm.getDomid(),
image = self.loader,
@@ -855,7 +896,9 @@
target = mem_mb,
vcpus = self.vm.getVCpuCount(),
acpi = self.acpi,
- apic = self.apic)
+ apic = self.apic,
+ pci = pci_str)
+
rc['notes'] = { 'SUSPEND_CANCEL': 1 }
rc['store_mfn'] = xc.hvm_get_param(self.vm.getDomid(),
diff -r b6cf416223e3 tools/python/xen/xm/create.py
--- a/tools/python/xen/xm/create.py Fri Mar 27 19:44:05 2009 +0900
+++ b/tools/python/xen/xm/create.py Mon Mar 30 15:42:08 2009 +0900
@@ -323,7 +323,7 @@
backend driver domain to use for the disk.
The option may be repeated to add more than one disk.""")
-gopts.var('pci',
val='BUS:DEV.FUNC[@VSLOT][,msitranslate=0|1][,power_mgmt=0|1]',
+gopts.var('pci',
val='BUS:DEV.FUNC[@VSLOT][,msitranslate=0|1][,power_mgmt=0|1][,boot=0|1]',
fn=append_value, default=[],
use="""Add a PCI device to a domain, using given params (in hex).
For example 'pci=c0:02.1'.
@@ -334,7 +334,10 @@
translated from physical MSI, HVM only. Default is 1.
The option may be repeated to add more than one pci device.
If power_mgmt is set, the guest OS will be able to program the power
- states D0-D3hot of the device, HVM only. Default=0.""")
+ states D0-D3hot of the device, HVM only. Default=0.
+ The option can add only one pci device.
+ If boot is set, guest BIOS boot OS from the pass-through devices.
+ The option is used by SAN/SAS boot.""")
gopts.var('vscsi', val='PDEV,VDEV[,DOM]',
fn=append_value, default=[],
@@ -704,7 +707,7 @@
d = comma_sep_kv_to_dict(opts)
def f(k):
- if k not in ['msitranslate', 'power_mgmt']:
+ if k not in ['msitranslate', 'power_mgmt', 'boot']:
err('Invalid pci option: ' + k)
config_pci_opts.append([k, d[k]])
diff -r b6cf416223e3 xen/include/public/hvm/hvm_info_table.h
--- a/xen/include/public/hvm/hvm_info_table.h Fri Mar 27 19:44:05 2009 +0900
+++ b/xen/include/public/hvm/hvm_info_table.h Mon Mar 30 15:42:08 2009 +0900
@@ -64,6 +64,11 @@
* RAM above 4GB
*/
uint32_t high_mem_pgend;
+ /*
+ * SBDF of bootable pass-through devices
+ * It is used by hvmloader for loading option ROM.
+ */
+ uint32_t pci_vd[4];
};
#endif /* __XEN_PUBLIC_HVM_HVM_INFO_TABLE_H__ */
_______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |