[Xen-devel] Re: pv_ops kernel 2.6.29-rc6 boot failure

[Andrew Lyon <andrew.lyon@xxxxxxxxx>]

On Wed, Mar 4, 2009 at 10:40 AM, Andrew Lyon <andrew.lyon@xxxxxxxxx> wrote:
> Hi,
>
> I did a git pull on pv_ops tree this morning and now get a crash when
> eth0 is started, here is the full boot log:
>
>  Booting 'Xen 3.4 / Linux 2.6.29-rc6-tip'
>
> root (hd0,0)
>  Filesystem type is ext2fs, partition type 0x83
> kernel /xen.gz com1=115200,8n1 console=com1,vga iommu=1
>   [Multiboot-elf, <0x100000:0x131748:0x8e8b8>, shtab=0x2c0078, entry=0x100000]
> module /vmlinux.bin.gz-2.6.29-rc6-tip root=/dev/sda2 console=hvc0 
> earlyprink=xe
> n pci=nomsi panic=5
>   [Multiboot-module @ 0x2c1000, 0xa13c48 bytes]
>
>  __  __            _____ _  _                      _        _     _
>  \ \/ /___ _ __   |___ /| || |     _   _ _ __  ___| |_ __ _| |__ | | ___
>  \  // _ \ '_ \    |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
>  /  \  __/ | | |  ___) |__   _|__| |_| | | | \__ \ || (_| | |_) | |  __/
>  /_/\_\___|_| |_| |____(_) |_|     \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
>
> (XEN) Xen version 3.4-unstable (root@) (gcc version 4.1.2 (Gentoo
> 4.1.2 p1.0.2)) Tue Feb 24 10:56:36 GMT 2009
> (XEN) Latest ChangeSet: unavailable
> (XEN) Command line: com1=115200,8n1 console=com1,vga iommu=1
> (XEN) Video information:
> (XEN)  VGA is text mode 80x25, font 8x16
> (XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
> (XEN) Disc information:
> (XEN)  Found 1 MBR signatures
> (XEN)  Found 1 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN)  0000000000000000 - 000000000009ec00 (usable)
> (XEN)  00000000000f0000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 00000000cfdff800 (usable)
> (XEN)  00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
> (XEN)  00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
> (XEN)  00000000cfe55c00 - 00000000d0000000 (reserved)
> (XEN)  00000000e0000000 - 00000000f0000000 (reserved)
> (XEN)  00000000fec00000 - 00000000fed00400 (reserved)
> (XEN)  00000000fed20000 - 00000000feda0000 (reserved)
> (XEN)  00000000fee00000 - 00000000fef00000 (reserved)
> (XEN)  00000000ffb00000 - 0000000100000000 (reserved)
> (XEN)  0000000100000000 - 0000000128000000 (usable)
> (XEN) System RAM: 3965MB (4060788kB)
> (XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL  )
> (XEN) ACPI: XSDT 000FC5B3, 008C (r1 DELL    B9K           15 ASL        61)
> (XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL    B9K           15 ASL        61)
> (XEN) ACPI: DSDT FFF76BF6, 4596 (r1   DELL    dt_ex     1000 INTL 20050624)
> (XEN) ACPI: FACS CFDFF800, 0040
> (XEN) ACPI: SSDT FFF7B2AB, 00AA (r1   DELL    st_ex     1000 INTL 20050624)
> (XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL    B9K           15 ASL        61)
> (XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL    B9K           15 ASL        61)
> (XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL    B9K           15 ASL        61)
> (XEN) ACPI: MCFG 000FC927, 003E (r1 DELL    B9K           15 ASL        61)
> (XEN) ACPI: HPET 000FC965, 0038 (r1 DELL    B9K           15 ASL        61)
> (XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL    B9K           15 ASL        61)
> (XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL    B9K           15 ASL        61)
> (XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL    B9K           15 ASL        61)
> (XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm  Cpu0Ist       11 INTL 20050624)
> (XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm  Cpu1Ist       11 INTL 20050624)
> (XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm    CpuPm       10 INTL 20050624)
> (XEN) NUMA turned off
> (XEN) Faking a node at 0000000000000000-0000000128000000
> (XEN) Domain heap initialised
> (XEN) found SMP MP-table at 000fe710
> (XEN) DMI 2.5 present.
> (XEN) Using APIC driver default
> (XEN) ACPI: PM-Timer IO Port: 0x808
> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
> (XEN) ACPI:                  wakeup_vec[cfdff80c], vec_size[20]
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> (XEN) Processor #0 6:15 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> (XEN) Processor #1 6:15 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
> (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
> (XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000
> (XEN) [VT-D]dmar.c:460: Host address width 36
> (XEN) [VT-D]dmar.c:469: found ACPI_DMAR_DRHD
> (XEN) [VT-D]dmar.c:337: dmaru->address = fedae000
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1b.0
> (XEN) [VT-D]dmar.c:469: found ACPI_DMAR_DRHD
> (XEN) [VT-D]dmar.c:337: dmaru->address = fedb0000
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:3.0
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:3.2
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:3.3
> (XEN) [VT-D]dmar.c:469: found ACPI_DMAR_DRHD
> (XEN) [VT-D]dmar.c:337: dmaru->address = fedb1000
> (XEN) [VT-D]dmar.c:346: found INCLUDE_ALL
> (XEN) [VT-D]dmar.c:473: found ACPI_DMAR_RMRR
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1d.0
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1d.1
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1d.2
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1d.7
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1a.0
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1a.1
> (XEN) [VT-D]dmar.c:288: found endpoint: bdf = 0:1a.7
> (XEN) Intel VT-d has been enabled
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Initializing CPU#0
> (XEN) Detected 2394.061 MHz processor.
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 4096K
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU: Processor Core ID: 0
> (XEN) VMX: Supported advanced features:
> (XEN)  - APIC TPR shadow
> (XEN)  - MSR direct-access bitmap
> (XEN) HVM: VMX enabled
> (XEN) MCE: Intel newly family MC Init
> (XEN) Intel machine check reporting enabled on CPU#0.
> (XEN) CPU0: Thermal monitoring enabled (TM2)
> (XEN) CMCI: CPU0 has no CMCI support
> (XEN) CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
> (XEN) Booting processor 1/1 eip 8c000
> (XEN) Initializing CPU#1
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 4096K
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU: Processor Core ID: 1
> (XEN) MCE: Intel newly family MC Init
> (XEN) Intel machine check reporting enabled on CPU#1.
> (XEN) CPU1: Thermal monitoring enabled (TM2)
> (XEN) CMCI: CPU1 has no CMCI support
> (XEN) CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
> (XEN) Total of 2 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN)  -> Using new ACK method
> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
> (XEN) checking TSC synchronization across 2 CPUs: passed.
> (XEN) Platform timer is 14.318MHz HPET
> (XEN) microcode.c:73:d32767 microcode: CPU1 resumed
> (XEN) Brought up 2 CPUs
> (XEN) [VT-D]iommu.c:1692: Queued Invalidation hardware not found
> (XEN) [VT-D]iommu.c:1692: Queued Invalidation hardware not found
> (XEN) [VT-D]iommu.c:1692: Queued Invalidation hardware not found
> (XEN) [VT-D]iommu.c:1700: Interrupt Remapping hardware not found
> (XEN) [VT-D]iommu.c:1700: Interrupt Remapping hardware not found
> (XEN) [VT-D]iommu.c:1700: Interrupt Remapping hardware not found
> (XEN) Intel VT-d snoop control disabled
> (XEN) I/O virtualisation enabled
> (XEN) I/O virtualisation for PV guests disabled
> (XEN) ACPI sleep modes: S3
> (XEN) mcheck_poll: Init_mcheck_timer
> (XEN) mcheck_poll: Machine check polling timer started.
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:0.0
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:3.0
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:3.2
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:3.3
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:19.0
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1a.0
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1a.1
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1a.7
> (XEN) [VT-D]iommu.c:1231:d32767 domain_context_mapping:PCIe: bdf = 0:1b.0
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1d.0
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1d.1
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1d.2
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1d.7
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1f.0
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1f.2
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1f.3
> (XEN) [VT-D]iommu.c:1231:d32767 domain_context_mapping:PCIe: bdf = 1:0.0
> (XEN) [VT-D]iommu.c:1231:d32767 domain_context_mapping:PCIe: bdf = 1:0.1
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 3:2.0
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 3:2.1
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 3:2.2
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 3:2.3
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 3:2.4
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 3:2.5
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 3:2.6
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 3:2.7
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1d.0
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1d.1
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1d.2
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1d.7
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1a.0
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1a.1
> (XEN) [VT-D]iommu.c:1238:d32767 domain_context_mapping:PCI: bdf = 0:1a.7
> (XEN) [VT-D]iommu.c:620: iommu_enable_translation: iommu->reg = 
> ffff828bfff57000
> (XEN) [VT-D]iommu.c:620: iommu_enable_translation: iommu->reg = 
> ffff828bfff56000
> (XEN) [VT-D]iommu.c:620: iommu_enable_translation: iommu->reg = 
> ffff828bfff55000
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) elf_parse_binary: phdr: paddr=0x200000 memsz=0x4de000
> (XEN) elf_parse_binary: phdr: paddr=0x6de000 memsz=0x6e438
> (XEN) elf_parse_binary: phdr: paddr=0x74d000 memsz=0x888
> (XEN) elf_parse_binary: phdr: paddr=0x74e000 memsz=0x6a200
> (XEN) elf_parse_binary: phdr: paddr=0x7b9000 memsz=0x13060
> (XEN) elf_parse_binary: phdr: paddr=0x7cd000 memsz=0xb5314
> (XEN) elf_parse_binary: memory: 0x200000 -> 0x882314
> (XEN) elf_xen_parse_note: GUEST_OS = "linux"
> (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
> (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
> (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
> (XEN) elf_xen_parse_note: ENTRY = 0xffffffff80758200
> (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80209000
> (XEN) elf_xen_parse_note: FEATURES = 
> "!writable_page_tables|pae_pgdir_above_4gb"
> (XEN) elf_xen_parse_note: PAE_MODE = "yes"
> (XEN) elf_xen_parse_note: LOADER = "generic"
> (XEN) elf_xen_parse_note: unknown xen elf note (0xd)
> (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
> (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
> (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
> (XEN) elf_xen_addr_calc_check: addresses:
> (XEN)     virt_base        = 0xffffffff80000000
> (XEN)     elf_paddr_offset = 0x0
> (XEN)     virt_offset      = 0xffffffff80000000
> (XEN)     virt_kstart      = 0xffffffff80200000
> (XEN)     virt_kend        = 0xffffffff80882314
> (XEN)     virt_entry       = 0xffffffff80758200
> (XEN)     p2m_base         = 0xffffffffffffffff
> (XEN)  Xen  kernel: 64-bit, lsb, compat32
> (XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 -> 0x882314
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   0000000122000000->0000000124000000 (957943 pages
> to be allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN)  Loaded kernel: ffffffff80200000->ffffffff80882314
> (XEN)  Init. ramdisk: ffffffff80883000->ffffffff80883000
> (XEN)  Phys-Mach map: ffffffff80883000->ffffffff80fe1fb8
> (XEN)  Start info:    ffffffff80fe2000->ffffffff80fe24b4
> (XEN)  Page tables:   ffffffff80fe3000->ffffffff80ff0000
> (XEN)  Boot stack:    ffffffff80ff0000->ffffffff80ff1000
> (XEN)  TOTAL:         ffffffff80000000->ffffffff81400000
> (XEN)  ENTRY ADDRESS: ffffffff80758200
> (XEN) Dom0 has maximum 2 VCPUs
> (XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff806de000
> (XEN) elf_load_binary: phdr 1 at 0xffffffff806de000 -> 0xffffffff8074c438
> (XEN) elf_load_binary: phdr 2 at 0xffffffff8074d000 -> 0xffffffff8074d888
> (XEN) elf_load_binary: phdr 3 at 0xffffffff8074e000 -> 0xffffffff807b8200
> (XEN) elf_load_binary: phdr 4 at 0xffffffff807b9000 -> 0xffffffff807cc060
> (XEN) elf_load_binary: phdr 5 at 0xffffffff807cd000 -> 0xffffffff807cd000
> (XEN) Scrubbing Free RAM: .done.
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: All
> (XEN) Guest Loglevel: All
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
> input to Xen)
> (XEN) Freed 132kB init memory.
> mapping kernel into physical memory
> Xen: setup ISA identity maps
> about to get started...
> (XEN) io_apic.c:2147:
> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
> (XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
> (XEN) io_apic.c:2147:
> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
> Linux version 2.6.29-rc6-tip (root@localhost) (gcc version 4.1.2
> (Gentoo 4.1.2 p1.0.2)) #8 SMP Wed Mar 4 10:03:29 GMT 2009
> Command line: root=/dev/sda2 console=hvc0 earlyprink=xen pci=nomsi panic=5
> KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
> BIOS-provided physical RAM map:
>  Xen: 0000000000000000 - 000000000009ec00 (usable)
>  Xen: 00000000000a0000 - 0000000000100000 (reserved)
>  Xen: 0000000000100000 - 0000000000883000 (usable)
>  Xen: 0000000000883000 - 0000000000fe3000 (reserved)
>  Xen: 0000000000fe3000 - 00000000cfdff800 (usable)
>  Xen: 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
>  Xen: 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
>  Xen: 00000000cfe55c00 - 00000000d0000000 (reserved)
>  Xen: 00000000e0000000 - 00000000f0000000 (reserved)
>  Xen: 00000000fec00000 - 00000000fed00400 (reserved)
>  Xen: 00000000fed20000 - 00000000feda0000 (reserved)
>  Xen: 00000000fee00000 - 00000000fef00000 (reserved)
>  Xen: 00000000ffb00000 - 0000000100000000 (reserved)
> DMI 2.5 present.
> last_pfn = 0xcfdff max_arch_pfn = 0x100000000
> init_memory_mapping: 0000000000000000-00000000cfdff000
> last_map_addr: cfdff000 end: cfdff000
> ACPI: RSDP 000FEC00, 0024 (r2 DELL  )
> ACPI: XSDT 000FC5B3, 008C (r1 DELL    B9K           15 ASL        61)
> ACPI: FACP 000FC6E3, 00F4 (r3 DELL    B9K           15 ASL        61)
> ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block:
> 128/64 [20081204]
> FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
> ACPI: DSDT FFF76BF6, 4596 (r1   DELL    dt_ex     1000 INTL 20050624)
> ACPI: FACS CFDFF800, 0040
> ACPI: SSDT FFF7B2AB, 00AA (r1   DELL    st_ex     1000 INTL 20050624)
> ACPI: APIC 000FC7D7, 0092 (r1 DELL    B9K           15 ASL        61)
> ACPI: BOOT 000FC869, 0028 (r1 DELL    B9K           15 ASL        61)
> ACPI: ASF! 000FC891, 0096 (r32 DELL    B9K           15 ASL        61)
> ACPI: MCFG 000FC927, 003E (r1 DELL    B9K           15 ASL        61)
> ACPI: HPET 000FC965, 0038 (r1 DELL    B9K           15 ASL        61)
> ACPI: TCPA 000FCBC1, 0032 (r1 DELL    B9K           15 ASL        61)
> ACPI: DMAR 000FCBF3, 00D0 (r1 DELL    B9K           15 ASL        61)
> ACPI: SLIC 000FC99D, 0176 (r1 DELL    B9K           15 ASL        61)
> ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm  Cpu0Ist       11 INTL 20050624)
> ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm  Cpu1Ist       11 INTL 20050624)
> ACPI: SSDT CFE00052, 0140 (r1 DpgPmm    CpuPm       10 INTL 20050624)
> (6 early reservations) ==> bootmem [0000000000 - 00cfdff000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000fe3000 - 0000ff0000]   XEN PAGETABLES ==> [0000fe3000 - 0000ff0000]
>  #2 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #3 [0000200000 - 0000882314]    TEXT DATA BSS ==> [0000200000 - 0000882314]
>  #4 [0000ff0000 - 00010331a0]              BRK ==> [0000ff0000 - 00010331a0]
>  #5 [0001034000 - 00016ac000]          PGTABLE ==> [0001034000 - 00016ac000]
> found SMP MP-table at [ffff8800000fe710] fe710
> Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
> Movable zone start PFN for each node
> early_node_map[3] active PFN ranges
>    0: 0x00000000 -> 0x0000009e
>    0: 0x00000100 -> 0x00000883
>    0: 0x00000fe3 -> 0x000cfdff
> ACPI: PM-Timer IO Port: 0x808
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> Using ACPI (MADT) for SMP configuration information
> ACPI: HPET id: 0x8086a301 base: 0xfed00000
> SMP: Allowing 2 CPUs, 0 hotplug CPUs
> Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
> NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
> PERCPU: Allocated 20 4k pages, static data 77920 bytes
> Xen: using vcpu_info placement
> Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 836144
> Kernel command line: root=/dev/sda2 console=hvc0 earlyprink=xen
> pci=nomsi panic=5
> Initializing CPU#0
> NR_IRQS:384
> xen_set_ioapic_routing: irq 1 gsi 1 vector 32 ioapic 0 pin 1
> triggering 0 polarity 0
> xen_set_ioapic_routing: irq 3 gsi 3 vector 40 ioapic 0 pin 3
> triggering 0 polarity 0
> xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4
> triggering 0 polarity 0
> xen_set_ioapic_routing: irq 5 gsi 5 vector 48 ioapic 0 pin 5
> triggering 0 polarity 0
> xen_set_ioapic_routing: irq 6 gsi 6 vector 56 ioapic 0 pin 6
> triggering 0 polarity 0
> xen_set_ioapic_routing: irq 7 gsi 7 vector 64 ioapic 0 pin 7
> triggering 0 polarity 0
> xen_set_ioapic_routing: irq 8 gsi 8 vector 72 ioapic 0 pin 8
> triggering 0 polarity 0
> xen_set_ioapic_routing: irq 9 gsi 9 vector 80 ioapic 0 pin 9
> triggering 1 polarity 0
> xen_set_ioapic_routing: irq 10 gsi 10 vector 88 ioapic 0 pin 10
> triggering 0 polarity 0
> xen_set_ioapic_routing: irq 11 gsi 11 vector 96 ioapic 0 pin 11
> triggering 0 polarity 0
> xen_set_ioapic_routing: irq 12 gsi 12 vector 104 ioapic 0 pin 12
> triggering 0 polarity 0
> xen_set_ioapic_routing: irq 13 gsi 13 vector 112 ioapic 0 pin 13
> triggering 0 polarity 0
> xen_set_ioapic_routing: irq 14 gsi 14 vector 120 ioapic 0 pin 14
> triggering 0 polarity 0
> xen_set_ioapic_routing: irq 15 gsi 15 vector 136 ioapic 0 pin 15
> triggering 0 polarity 0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Detected 2394.060 MHz processor.
> Console: colour VGA+ 80x25
> console [hvc0] enabled
> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Checking aperture...
> No AGP bridge found
> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> Placing 64MB software IO TLB between ffff880004b47000 - ffff880008b47000
> software IO TLB at phys 0x4b47000 - 0x8b47000
> Memory: 3264348k/3405820k available (3390k kernel code, 7944k absent,
> 132840k reserved, 1941k data, 468k init)
> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> installing Xen timer for CPU 0
> Calibrating delay loop (skipped), value calculated using timer
> frequency.. 4788.12 BogoMIPS (lpj=2394060)
> Mount-cache hash table entries: 256
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 4096K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> SMP alternatives: switching to UP code
> ACPI: Core revision 20081204
> cpu 0 spinlock event irq 25
> installing Xen timer for CPU 1
> cpu 1 spinlock event irq 31
> SMP alternatives: switching to SMP code
> Initializing CPU#1
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 4096K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> Brought up 2 CPUs
> khelper used greatest stack depth: 6664 bytes left
> net_namespace: 600 bytes
> Booting paravirtualized kernel on Xen
> Xen version: 3.4-unstable (preserve-AD) (dom0)
> Grant table initialized
> Time: 10:37:56  Date: 03/04/09
> NET: Registered protocol family 16
> khelper used greatest stack depth: 6656 bytes left
> xenbus_probe_init ok
> khelper used greatest stack depth: 6160 bytes left
> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> ACPI: bus type pci registered
> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> PCI: MCFG area at e0000000 reserved in E820
> PCI: Using MMCONFIG at e0000000 - efffffff
> PCI: Using configuration type 1 for base access
> bio: create slab <bio-0> at 0
> ACPI: Interpreter enabled
> ACPI: (supports S0 S1 S3 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: ACPI Dock Station Driver: 1 docks/bays found
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:01.0: PME# disabled
> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:03.0: PME# disabled
> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:19.0: PME# disabled
> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1a.7: PME# disabled
> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1b.0: PME# disabled
> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.0: PME# disabled
> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1d.7: PME# disabled
> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
> pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
> pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
> pci 0000:00:1f.2: PME# supported from D3hot
> pci 0000:00:1f.2: PME# disabled
> pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:03:02.0: PME# disabled
> pci 0000:00:1e.0: transparent bridge
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
> ACPI Warning (tbutils-0242): Incorrect checksum in table [TCPA] - 00,
> should be 87 [20081204]
> xen_balloon: Initialising balloon driver.
> SCSI subsystem initialized
> PCI: Using ACPI for IRQ routing
> cfg80211: Using static regulatory domain info
> cfg80211: Regulatory domain: US
>        (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>        (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
>        (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>        (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>        (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>        (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>        (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
> cfg80211: Calling CRDA for country: US
> Xen: Initializing Xen DMA ops
> Xen: Enabling DMA fallback to swiotlb
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
> (0x800-0x87f), disabling
> pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
> (0x800-0x87f), disabling
> xen_allocate_pirq: returning irq 13 for gsi 13
> xen_set_ioapic_routing: irq 13 gsi 13 vector 112 ioapic 0 pin 13
> triggering 0 polarity 0
> xen_allocate_pirq: returning irq 8 for gsi 8
> xen_set_ioapic_routing: irq 8 gsi 8 vector 72 ioapic 0 pin 8
> triggering 0 polarity 0
> xen_allocate_pirq: returning irq 7 for gsi 7
> xen_set_ioapic_routing: irq 7 gsi 7 vector 64 ioapic 0 pin 7
> triggering 0 polarity 0
> xen_allocate_pirq: returning irq 4 for gsi 4
> xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4
> triggering 0 polarity 0
> pnp: PnP ACPI: found 9 devices
> ACPI: ACPI bus type pnp unregistered
> system 00:01: ioport range 0xc00-0xc7f has been reserved
> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
> pci 0000:00:01.0:   IO window: 0xd000-0xdfff
> pci 0000:00:01.0:   MEM window: 0xfe900000-0xfeafffff
> pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
> pci 0000:00:1c.0:   IO window: disabled
> pci 0000:00:1c.0:   MEM window: 0xfe800000-0xfe8fffff
> pci 0000:00:1c.0:   PREFETCH window: disabled
> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
> pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
> pci 0000:00:1e.0:   MEM window: 0xfe600000-0xfe7fffff
> pci 0000:00:1e.0:   PREFETCH window: 0x000000f0000000-0x000000f00fffff
> xen_set_ioapic_routing: irq 16 gsi 16 vector 168 ioapic 0 pin 16
> triggering 1 polarity 1
> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> xen_allocate_pirq: returning irq 16 for gsi 16
> xen_set_ioapic_routing: irq 16 gsi 16 vector 168 ioapic 0 pin 16
> triggering 1 polarity 1
> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> NET: Registered protocol family 2
> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> NET: Registered protocol family 1
> Simple Boot Flag at 0x7a set to 0x1
> audit: initializing netlink socket (disabled)
> type=2000 audit(1236163078.067:1): initialized
> VFS: Disk quotas dquot_6.5.2
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> msgmni has been set to 6651
> alg: No test for stdrng (krng)
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> ACPI: Power Button (FF) [PWRF]
> input: Power Button (CM) as
> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> ACPI: Power Button (CM) [VBTN]
> xenbus_probe_backend_init bus registered ok
> xenbus_probe_frontend_init bus registered ok
> Event-channel device installed.
> ***blkif_init
> *** netif_init
> registering netback
> Non-volatile memory driver v1.3
> Linux agpgart interface v0.103
> [drm] Initialized drm 1.1.0 20060810
> brd: module loaded
> loop: module loaded
> tun: Universal TUN/TAP device driver, 1.6
> tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> console [netcon0] enabled
> netconsole: network logging started
> Loading iSCSI transport class v2.0-870.
> Driver 'sd' needs updating - please use bus_type methods
> Driver 'sr' needs updating - please use bus_type methods
> xen_set_ioapic_routing: irq 18 gsi 18 vector 176 ioapic 0 pin 18
> triggering 1 polarity 1
> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl SATA mode
> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> scsi3 : ahci
> scsi4 : ahci
> scsi5 : ahci
> ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 18
> ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 18
> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 18
> ata4: DUMMY
> ata5: DUMMY
> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 18
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-6: WDC WD360GD-00FLA2, 31.08F31, max UDMA/133
> ata1.00: 72303840 sectors, multi 0: LBA48
> ata1.00: configured for UDMA/133
> scsi 0:0:0:0: Direct-Access     ATA      WDC WD360GD-00FL 31.0 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors: (37.0 GB/34.4 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors: (37.0 GB/34.4 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
>  sda: sda1 sda2 sda3
> sd 0:0:0:0: [sda] Attached SCSI disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H73N, B103, max UDMA/100
> ata2.00: configured for UDMA/100
> scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GSA-H73N B103 PQ: 0 ANSI: 5
> sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi generic sg1 type 5
> ata3: SATA link down (SStatus 4 SControl 300)
> ata6: SATA link down (SStatus 4 SControl 300)
> PNP: No PS/2 controller found. Probing ports directly.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: 
> dm-devel@xxxxxxxxxx
> cpuidle: using governor ladder
> dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
> TCP cubic registered
> NET: Registered protocol family 17
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> IO APIC resources could be not be allocated.
> registered taskstats version 1
>  Magic number: 1:919:627
> md: Waiting for all devices to be available before autodetect
> md: If you don't use raid, use raid=noautodetect
> md: Autodetecting RAID arrays.
> md: Scanned 0 and added 0 devices.
> md: autorun ...
> md: ... autorun DONE.
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS on sda2, internal journal
> EXT3-fs: recovery complete.
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) on device 8:2.
> Freeing unused kernel memory: 468k freed
> Write protecting the kernel read-only data: 4948k
> khelper used greatest stack depth: 5848 bytes left
> INIT: version 2.86 booting
> consoletype used greatest stack depth: 5824 bytes left
> bash used greatest stack depth: 5544 bytes left
> stty used greatest stack depth: 4368 bytes left
>
> Gentoo Linux; http://www.gentoo.org/
>  Copyright 1999-2007 Gentoo Foundation; Distributed under the GPLv2
>
> Press I to enter interactive boot mode
>
>  * Mounting proc at /proc ...                                             [ 
> ok ]
>  * Mounting sysfs at /sys ...                                             [ 
> ok ]
>  * Mounting /dev ...                                                      [ 
> ok ]
>  * Starting udevd ...                                                     [ 
> ok ]
>  * Populating /dev with existing devices through uevents ...              [ 
> ok ]
>  * Waiting for uevents to be processed ...                                [ 
> ok ]
>  * Mounting devpts at /dev/pts ...                                        [ 
> ok ]
>  * Remounting root filesystem read-only ...                               [ 
> ok ]
>  * Checking root filesystem .../dev/sda2: clean, 428424/1756512 files,
> 1909127/7012352 blocks (check after next mount)
>                                           [ ok ]
>  * Remounting root filesystem read/write ...                              [ 
> ok ]
>  * Using /etc/modules.autoload.d/kernel-2.6 as config:
>  *   Loading module e1000e ...                                            [ 
> ok ]
>  * Autoloaded 1 module(s)
>  * Setting up the Logical Volume Manager ...                              [ 
> ok ]
>  * Checking all filesystems .../dev/sda1: clean, 43/24096 files,
> 18612/96356 blocks
>                                           [ ok ]
>  * Mounting local filesystems ...                                         [ 
> ok ]
>  * Mounting misc binary format filesystem ...                             [ 
> ok ]
>  * Activating (possible) swap ...                                         [ 
> ok ]
>  * Your TIMEZONE in /etc/conf.d/clock is still set to Factory!
>  * Setting system clock using the hardware clock [UTC] ...
>  * Cannot access the Hardware Clock via any known method.
> Use the --debug option to see the details of our search for an access
> method.Cannot access the Hardware Clock via any known method.
> Use the --debug option to see the details of our search for an access method.
>  * Failed to set clock You will need to set the clock yourself
>                                                                          [ !! 
> ]
>  * Configuring kernel parameters ...                                      [ 
> ok ]
>  * Updating environment ...                                               [ 
> ok ]
>  * Cleaning /var/lock, /var/run ...                                       [ 
> ok ]
>  * Wiping /tmp directory ...                                              [ 
> ok ]
>  * Device initiated services: udev-postmount
>  * Setting hostname to localhost ...                                      [ 
> ok ]
>  * Loading key mappings ...
>  * /bin/loadkeys not found
>                                                                          [ !! 
> ]
>  * ERROR:  cannot start consolefont as keymaps could not start
>  * Starting lo
>  *   Bringing up lo
>  *     127.0.0.1/8
>                                                                          [ ok 
> ]
>  *   Adding routes
>  *     127.0.0.0/8 ...                                                    [ 
> ok ]
>  * Initializing random number generator ...                               [ 
> ok ]
> INIT: Entering runlevel: 3
>  * Starting syslog-ng ...                                                 [ 
> ok ]
>  * Loading key mappings ...
>  * /bin/loadkeys not found
>                                                                          [ !! 
> ]
>  * ERROR:  cannot start consolefont as keymaps could not start
>  * Starting eth0
>  *   Bringing up eth0
>  *     10.0.4.3/21
> general protection fault: 0000 [#1] SMP
> last sysfs file: /sys/devices/virtual/block/md0/dev
> CPU 0
> Modules linked in: e1000e
> Pid: 0, comm: swapper Not tainted 2.6.29-rc6-tip #8 OptiPlex 755
> RIP: e030:[<ffffffff804a5701>]  [<ffffffff804a5701>] skb_drop_list+0x13/0x2d
> RSP: e02b:ffffc20000003c50  EFLAGS: 00010286
> RAX: 40a0000000000000 RBX: ffff8800ce587b00 RCX: 0000000000000000
> RDX: ffffffff8074b7a0 RSI: ffff8800ce610000 RDI: ffff8800ce4d409a
> RBP: ffffc20000003c60 R08: ffffffff8020db15 R09: ffff8800ce587b00
> R10: 0000000000000000 R11: ffffc20000003ef8 R12: 0000000000000000
> R13: 0000000000000000 R14: ffff8800ce610000 R15: 0000000000000000
> FS:  00007f10984246f0(0000) GS:ffffc20000000000(0000) knlGS:0000000000000000
> CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 00007f725eb4b800 CR3: 00000000ce4dc000 CR4: 0000000000002660
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 0, threadinfo ffffffff8074e000, task ffffffff806de360)
> Stack:
>  000000000000000b ffff8800ce587b00 ffffc20000003c80 ffffffff804a57b6
>  ffff8800ce587b00 ffffffff8074b760 ffffc20000003ca0 ffffffff804a5e18
>  0000000000000000 ffff8800ce587b00 ffffc20000003cc0 ffffffff804a5636
> Call Trace:
>  <IRQ> <0> [<ffffffff804a57b6>] skb_release_data+0x9b/0xac
>  [<ffffffff804a5e18>] skb_release_all+0x19/0x1e
>  [<ffffffff804a5636>] __kfree_skb+0x11/0x78
>  [<ffffffff804a56c5>] kfree_skb+0x28/0x2a
>  [<ffffffff804abc91>] netif_receive_skb+0x2c6/0x2eb
>  [<ffffffff804ac067>] napi_gro_receive+0x26/0x3a
>  [<ffffffffa000c1ab>] e1000_receive_skb+0x45/0x4d [e1000e]
>  [<ffffffffa000f31d>] e1000_clean_rx_irq+0x225/0x2c5 [e1000e]
>  [<ffffffffa000e925>] e1000_clean+0x96/0x250 [e1000e]
>  [<ffffffff803d70a6>] ? pirq_unmask_notify+0x35/0x8d
>  [<ffffffff8020e1e2>] ? check_events+0x12/0x20
>  [<ffffffff804ae69d>] net_rx_action+0xba/0x180
>  [<ffffffff8023ecd4>] __do_softirq+0x7b/0x142
>  [<ffffffff80211c8c>] call_softirq+0x1c/0x30
>  [<ffffffff8021301a>] do_softirq+0x40/0x8a
>  [<ffffffff8023ec57>] irq_exit+0x3f/0x41
>  [<ffffffff803d7ad6>] xen_evtchn_do_upcall+0x137/0x153
>  [<ffffffff80211cde>] xen_do_hypervisor_callback+0x1e/0x30
>  <EOI> <0> [<ffffffff802093aa>] ? _stext+0x3aa/0x1006
>  [<ffffffff802093aa>] ? _stext+0x3aa/0x1006
>  [<ffffffff8020db5b>] ? xen_safe_halt+0x10/0x1a
>  [<ffffffff8020b370>] ? xen_idle+0x34/0x48
>  [<ffffffff8020fb61>] ? cpu_idle+0x4d/0x6b
>  [<ffffffff8053856d>] ? rest_init+0x61/0x63
> Code: c3 ff ff ff 48 89 df e8 62 fb ff ff 48 85 c0 48 89 c7 75 eb 5f
> 5b c9 c3 55 48 89 e5 53 48 83 ec 08 48 8b 07 48 c7 07 00 00 00 00 <48>
> 8b 18 48 89 c7 e8 91 ff ff ff 48 85 db 74 05 48 89 d8 eb eb
> RIP  [<ffffffff804a5701>] skb_drop_list+0x13/0x2d
>  RSP <ffffc20000003c50>
> ---[ end trace 599c18f3f5b87efb ]---
> Kernel panic - not syncing: Fatal exception in interrupt
> Pid: 0, comm: swapper Tainted: G      D    2.6.29-rc6-tip #8
> Call Trace:
>  <IRQ>  [<ffffffff80239f1b>] panic+0xa0/0x160
>  [<ffffffff8020e1cf>] ? xen_restore_fl_direct_end+0x0/0x1
>  [<ffffffff80549977>] ? _spin_unlock_irqrestore+0x17/0x1a
>  [<ffffffff8020db15>] ? xen_force_evtchn_callback+0xd/0xf
>  [<ffffffff8020e1e2>] ? check_events+0x12/0x20
>  [<ffffffff80239c42>] ? print_oops_end_marker+0x1e/0x20
>  [<ffffffff8054a6bd>] oops_end+0xb7/0xc7
>  [<ffffffff80213f3d>] die+0x55/0x5e
>  [<ffffffff8054a353>] do_general_protection+0x128/0x130
>  [<ffffffff80549c15>] general_protection+0x25/0x30
>  [<ffffffff8020db15>] ? xen_force_evtchn_callback+0xd/0xf
>  [<ffffffff804a5701>] ? skb_drop_list+0x13/0x2d
>  [<ffffffff804a57b6>] skb_release_data+0x9b/0xac
>  [<ffffffff804a5e18>] skb_release_all+0x19/0x1e
>  [<ffffffff804a5636>] __kfree_skb+0x11/0x78
>  [<ffffffff804a56c5>] kfree_skb+0x28/0x2a
>  [<ffffffff804abc91>] netif_receive_skb+0x2c6/0x2eb
>  [<ffffffff804ac067>] napi_gro_receive+0x26/0x3a
>  [<ffffffffa000c1ab>] e1000_receive_skb+0x45/0x4d [e1000e]
>  [<ffffffffa000f31d>] e1000_clean_rx_irq+0x225/0x2c5 [e1000e]
>  [<ffffffffa000e925>] e1000_clean+0x96/0x250 [e1000e]
>  [<ffffffff803d70a6>] ? pirq_unmask_notify+0x35/0x8d
>  [<ffffffff8020e1e2>] ? check_events+0x12/0x20
>  [<ffffffff804ae69d>] net_rx_action+0xba/0x180
>  [<ffffffff8023ecd4>] __do_softirq+0x7b/0x142
>  [<ffffffff80211c8c>] call_softirq+0x1c/0x30
>  [<ffffffff8021301a>] do_softirq+0x40/0x8a
>  [<ffffffff8023ec57>] irq_exit+0x3f/0x41
>  [<ffffffff803d7ad6>] xen_evtchn_do_upcall+0x137/0x153
>  [<ffffffff80211cde>] xen_do_hypervisor_callback+0x1e/0x30
>  <EOI>  [<ffffffff802093aa>] ? _stext+0x3aa/0x1006
>  [<ffffffff802093aa>] ? _stext+0x3aa/0x1006
>  [<ffffffff8020db5b>] ? xen_safe_halt+0x10/0x1a
>  [<ffffffff8020b370>] ? xen_idle+0x34/0x48
>  [<ffffffff8020fb61>] ? cpu_idle+0x4d/0x6b
>  [<ffffffff8053856d>] ? rest_init+0x61/0x63
> Rebooting in 5 seconds..
>
>
> Andy
>

Sincere apologies for the noise, I rebuilt the modules and it now
boots successfully.

Andy

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel