Re: [Xen-devel] Console output with pv_ops kernel

[Jeremy Fitzhardinge <jeremy@xxxxxxxx>]

jonr@xxxxxxxxxx wrote:
> I am trying to get my Xen-3.4-unstable with 2.6.29-rc3-tip to output 
> to the console after Xen releases control back to the kernel. I can 
> see the Xen portion but as soon as it scrubs memory it goes to a blank 
> screen. It will boot up but I will never see a login prompt. I have to 
> ssh into the box.
> I have tried various options for grub but have not found the correct 
> combination as of yet. Here is what I have for my menu.lst:
> This is the latest incantation:
>
> title Xen 3.4 / kernel 2.6.29-tip-rc3
>   root(hd0,0)
>   kernel /boot/xen-3.4-unstable.gz dom0_mem=512M
>   module /boot/vmlinuz-2.6.29-rc3-tip-new ro console=hvc0 
> earlyprintk=xen pci=nomsi
>   module /boot/initramfs-2.6.29-rc3-tip-new.cpio.gz
>
> ====
> Also:
> ====
> title Xen 3.4 / kernel 2.6.29-tip-rc3
>   root(hd0,0)
>   kernel /boot/xen-3.4-unstable.gz dom0_mem=512M
>   module /boot/vmlinuz-2.6.29-rc3-tip-new ro console=hvc0 
> earlyprintk=xen pci=nomsi
>   module /boot/initramfs-2.6.29-rc3-tip-new.cpio.gz
>
>
> Has anybody gotten this to output to the screen? Is there some magic 
> that I am missing?
This should work if you're using a serial console.  Otherwise, you can 
use a vga console; I use:
title xen-unstable pvops
       kernel /xen-3.gz loglvl=all guest_loglvl=all
       module /vmlinuz-2.6.29-rc5-tip ro root=/dev/VolGroup00/LogVol00 ignore_loglevel pci=nomsi earlyprintk=vga console=tty0 
       module /initrd-2.6.29-rc5-tip.img

   J

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel