Keir,
Thanks for your help.
I have got the c/s 15011 source
code and applied the Neocleus 1:1 Patch on it.
When I start the the HVM
guest, the HVM guest can not start and the system hang. Can you give some
suggestion on this issue?
The following is the log
info:
domid: 1
qemu: the number of cpus
is 1
Watching
/local/domain/1/logdirty/next-active
qemu_map_cache_init
nr_buckets = 4000
shared page at pfn 68cff
buffered io page at pfn
68cfd
Time offset set 0
xs_read(): vncpasswd get
error. /vm/e1749c9c-1aa0-c18e-bedd-fc546dd3d363/vncpasswd.
NEO: Registering real
physical device USB_F0 (devfn=0xffffffff)
-----=[ 00:1a.0 ]=-----
Regions:
[4] 32Bits:
NEO_PCI_ADDRESS_SPACE_IO (flags=0x0010)
Base: 0x000020c0
Size: 0x00000020
-----=[END: 00:1a.0
]=-----
NEO:
register_real_device: IO region registered (size=0x00000020
type=NEO_PCI_ADDRESS_SPACE_IO index=4 base_addr=0x000020c0)
NEO: Binding mirq 17 to
device=0x3 intx=0x0
NEO: Binding rc=168
NEO: Real physical device
(00:1a.0) "USB_F0" registered successfuly!
NEO: Registering real
physical device USB_F1 (devfn=0x19)
-----=[ 00:1a.1 ]=-----
Regions:
[4] 32Bits:
NEO_PCI_ADDRESS_SPACE_IO (flags=0x0010)
Base:
0x000020a0 Size: 0x00000020
-----=[END: 00:1a.1
]=-----
NEO:
register_real_device: IO region registered (size=0x00000020
type=NEO_PCI_ADDRESS_SPACE_IO index=4 base_addr=0x000020a0)
NEO: Binding mirq 20 to
device=0x3 intx=0x1
NEO: Binding rc=-1
NEO: Real physical device
(00:1a.1) "USB_F1" registered successfuly!
NEO: Registering real
physical device USB_F7 (devfn=0x1f)
-----=[ 00:1a.7 ]=-----
Regions:
[0] 32Bits:
NEO_PCI_ADDRESS_SPACE_MEM (flags=0x0010)
Base:
0x903a5400 Size: 0x00000400
-----=[END: 00:1a.7
]=-----
NEO: register_real_device:
IO region registered (size=0x00000400 type=NEO_PCI_ADDRESS_SPACE_MEM
index=0 base_addr=0x903a5400)
NEO: Binding mirq 18 to
device=0x3 intx=0x2
NEO: Binding rc=-1
NEO: Real physical device
(00:1a.7) "USB_F7" registered successfuly!
I/O request not ready: 0,
ptr: 0, port: 0, data: 0, count: 0, size: 0
Triggered log-dirty
buffer switch
From:
Keir Fraser [mailto:Keir.Fraser@xxxxxxxxxxxx]
Sent: 2007年12月28日
16:33
To: Wang, Caleb;
xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-devel] How to
get the c/s 15011(unstable)
hg clone http://xenbits.xensource.com/xen-unstable.hg
cd xen-unstable.hg
hg update 15011
make world
-- Keir
On 28/12/07 07:36, "Wang, Caleb" <caleb.wang@xxxxxxxxx> wrote:
I notice that the author
said these patches can be applied cleanly on C/S 15011 (unstable), I
don’t know how to get the source code of C/S 15011 (unstable).
Can somebody tell me how to get the code or tell me which version can use these
patches?
