[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Re: 3ware 9650 and Xen 3.1
Here is the serial output from a kernel patched with 3.0.4. The xen.gz is 3.1 and the same exact file/version i used to boot 2.6.18 thats having the BUG. Also the 3ware driver in this kernel may be a bit older because i build this kernel a while ago... Kernel Version: 2.6.16.38 Xen Patch Changeset: 13139 __ __ _____ _ ___ \ \/ /___ _ __ |___ / / | / _ \ \ // _ \ '_ \ |_ \ | || | | | / \ __/ | | | ___) || || |_| | /_/\_\___|_| |_| |____(_)_(_)___/ http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer LaboratoryXen version 3.1.0 (root@localdomain) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) Tue Sep 11 00:36:30 PDT 2007 Latest ChangeSet: unavailable (XEN) Command line: /xen-2.6.18-xen.15042_1.gz com1=115200,8n1 (XEN) 0000000000000000 - 000000000009d000 (usable) (XEN) 000000000009d400 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000cff60000 (usable) (XEN) 00000000cff60000 - 00000000cff69000 (ACPI data) (XEN) 00000000cff69000 - 00000000cff80000 (ACPI NVS) (XEN) 00000000cff80000 - 00000000d0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ff000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000230000000 (usable) (XEN) System RAM: 8190MB (8387572kB) (XEN) Xen heap: 9MB (10020kB) (XEN) Domain heap initialised: DMA width 32 bits (XEN) PAE enabled, limit: 16 GB (XEN) Processor #0 6:15 APIC version 20 (XEN) Processor #6 6:15 APIC version 20 (XEN) Processor #1 6:15 APIC version 20 (XEN) Processor #7 6:15 APIC version 20 (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47 (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2000.136 MHz processor. (XEN) VMX disabled by Feature Control MSR. (XEN) CPU0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 (XEN) Mapping cpu 0 to node 255 (XEN) Booting processor 1/6 eip 90000 (XEN) Mapping cpu 1 to node 255 (XEN) VMX disabled by Feature Control MSR. (XEN) CPU1: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 (XEN) Booting processor 2/1 eip 90000 (XEN) Mapping cpu 2 to node 255 (XEN) VMX disabled by Feature Control MSR. (XEN) CPU2: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 (XEN) Booting processor 3/7 eip 90000 (XEN) Mapping cpu 3 to node 255 (XEN) VMX disabled by Feature Control MSR. (XEN) CPU3: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) Platform timer is 1.193MHz PIT (XEN) Brought up 4 CPUs (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 32-bit, PAE, lsb (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc049e33c (XEN) PHYSICAL MEMORY ARRANGEMENT:(XEN) Dom0 alloc.: 000000007e000000->0000000080000000 (2036959 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c049e33c (XEN) Init. ramdisk: c049f000->c098e800 (XEN) Phys-Mach map: c098f000->c115c37c (XEN) Start info: c115d000->c115d46c (XEN) Page tables: c115e000->c116d000 (XEN) Boot stack: c116d000->c116e000 (XEN) TOTAL: c0000000->c1400000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Dom0 has maximum 4 VCPUs (XEN) Initrd len 0x4ef800, start at 0xc049f000 (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console.(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). Linux version 2.6.16.38-xen0.13139_2 (root@xxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.4.6 20060404 (Red Hat 3. 4.6-8)) #1 SMP Sat Jun 2 14:57:49 PDT 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000001f3cdf000 (usable) 7268MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active found SMP MP-table at 000f5f00 DMI present. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,115200 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Xen reported: 2000.136 MHz processor. Console: colour VGA+ 80x50 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: 0x00000000c5902000 - 0x00000000c9902000 Address size: 30 bits vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000Memory: 8029108k/8188796k available (2107k kernel code, 150232k reserved, 880k data, 192k init, 7443332k high mem) Checking if this processor honours the WP bit even in supervisor mode... Ok.Calibrating delay using timer specific routine.. 5003.27 BogoMIPS (lpj=10006554) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: L3 cache: 4096K Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs Initializing CPU#1 Initializing CPU#2 Brought up 4 CPUs Initializing CPU#3 migration_cost=7057 checking if image is initramfs... it is Freeing initrd memory: 5054k freed Grant table initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG PCI: No mmconfig possible on a:1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4 (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000109f1 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! pnp: PnP ACPI: found 12 devices xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:02.0 IO window: 2000-2fff MEM window: da000000-da0fffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.0 IO window: 2000-2fff MEM window: da000000-da0fffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: 2000-2fff MEM window: da000000-da1fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: 3000-3fff MEM window: da300000-da3fffff PREFETCH window: d8000000-d9ffffff PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:08:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: da200000-da2fffff PREFETCH window: d0000000-d7ffffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 18 Simple Boot Flag at 0x38 set to 0x1 IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx> audit: initializing netlink socket (disabled) audit(1189582249.120:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 assign_interrupt_mode Found MSI capability ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 assign_interrupt_mode Found MSI capability ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 assign_interrupt_mode Found MSI capability ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 18 assign_interrupt_mode Found MSI capability ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 assign_interrupt_mode Found MSI capability ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 17 assign_interrupt_mode Found MSI capability ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU2] (supports 8 throttling states) Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Xen virtual console successfully installed as ttyS0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ESB2: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17 ESB2: chipset revision 9 ESB2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:pio, hdb:DMA hdb: MATSHITADVD-ROM SR-8178, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdb: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 192k freed Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Loading uhci-hcd.ko module USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 17, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-1: new low speed USB device using uhci_hcd and address 2 Loading ohci-hcd.ko module Loading ehci-hcd.ko module ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 17 (level, low) -> IRQ 18 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: irq 18, io mem 0xda600000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected Loading jbd.ko module Loading ext3.ko module Loading scsi_mod.ko module SCSI subsystem initialized Loading sd_mod.ko module Loading 3w-9xxx.ko module 3ware 9000 Storage Controller device driver for Linux v2.26.02.008. ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16 scsi0 : 3ware 9000 Storage Controller3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xda300000, IRQ: 16. usb 1-1: device not accepting address 2, error -71 3w-9xxx: scsi0: Firmware FE9X 3.08.02.005, BIOS BE9X 3.08.00.002, Ports: 4. Vendor: AMCC Model: 9650SE-4LP DISK Rev: 3.08 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 1953083392 512-byte hdwr sectors (999979 MB) sda: Write Protect is off SCSI device sda: drive cache: write back, no read (daft) SCSI device sda: 1953083392 512-byte hdwr sectors (999979 MB) sda: Write Protect is off SCSI device sda: drive cache: write back, no read (daft) sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda Loading dm-mod.ko module device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx Loading dm-mirror.ko module Loading dm-zero.ko module Loading dm-snapshot.ko module Waiting for driver initialization. usb 1-1: new low speed USB device using uhci_hcd and address 4 usb 1-1: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input0input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1 usb 1-2: new low speed USB device using uhci_hcd and address 5 usb 1-2: configuration #1 chosen from 1 choice input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input1input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.0-2 input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input2input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.0-2 Making device-mapper control node Scanning logical volumes Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2 Found volume group "VolGroup01" using metadata type lvm2 Activating logical volumes 3 logical volume(s) in volume group "VolGroup00" now active Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks INIT: version 2.86 booting *************************************************************** *************************************************************** ** WARNING: Currently emulating unsupported memory accesses ** ** in /lib/tls glibc libraries. The emulation is ** ** slow. To ensure full performance you should ** ** install a 'xen-friendly' (nosegneg) version of ** ** the library, or disable tls support by executing ** ** the following as root: ** ** mv /lib/tls /lib/tls.disabled ** ** Offending process: init (pid=983) ** *************************************************************** ***************************************************************Pausing... 5Pausing... 4Pausing... 3Pausing... 2Pausing... 1Continuing... Welcome to CentOS release 5 (Final) Press 'I' to enter interactive startup. Setting clock (utc): Wed Sep 12 00:31:04 PDT 2007 [ OK ] Starting udev: [ OK ] Loading default keymap (us): [ OK ] Setting hostname devhost1.localdomain: [ OK ]Setting up Logical Volume Management: 3 logical volume(s) in volume group "VolGroup00" now active 1 logical volume(s) in volume group "VolGroup01" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00/dev/VolGroup00/LogVol00: clean, 293801/23035904 files, 2247030/23035904 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /boot: clean, 50/255232 files, 19310/255024 blocks [/sbin/fsck.ext3 (1) -- /data] fsck.ext3 -a /dev/VolGroup01/LogVol00 /dev/VolGroup01/LogVol00: clean, 11/51216384 files, 1651821/51191808 blocks [/sbin/fsck.ext3 (1) -- /tmp] fsck.ext3 -a /dev/VolGroup00/LogVol02 /dev/VolGroup00/LogVol02: clean, 12/1532576 files, 83797/1531904 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Starting sysstat: Calling the system activity data collector (sadc): [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Mounting other filesystems: [ OK ] Starting sshd: [ OK ] Starting console mouse services: [ OK ]Starting crond: [ OK ] _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |