[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] ata_piix SATA driver broken under Xen?
Hi all, I've been trying to boot Linux 2.6.16.16 as dom0 for a few days now but I can't work out how to get XenLinux to recognise my disk. It's looking like a bug in Xen, as booting the same version of Linux without Xen works fine. Does anyone know of any issues with the ata_piix (Intel ICH5/6) driver and SATA disks? Has anyone got this configuration going? Boot messages follow. This is with Xen 3.0.2-2. Thanks, Adam. Messages from Xen kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ICH6: chipset revision 3 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio hda: TEAC DVD+RW DV-W58E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Adaptec aacraid driver (1.1-4 Jun 5 2006 11:53:11) ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 5 ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 5 ata1: dev 0 ATA-6, max UDMA/133, 78125000 sectors: LBA ata1: qc timeout (cmd 0xef) <-- bad ata1: failed to set xfermode, disabled <-- bad ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ATA: abnormal status 0xFF on port 0xFE27 <-- normal ata2: disabling port scsi1 : ata_piix Messages from native kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169 ICH6: chipset revision 3 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio hda: TEAC DVD+RW DV-W58E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Adaptec aacraid driver (1.1-4 Jun 6 2006 11:16:39) ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 217 ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 217 ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 217 ata1: dev 0 ATA-6, max UDMA/133, 78125000 sectors: LBA ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ATA: abnormal status 0xFF on port 0xFE27 ata2: disabling port scsi1 : ata_piix Vendor: ATA Model: WDC WD400JD-75HK Rev: 14.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 78125000 512-byte hdwr sectors (40000 MB) sda: Write Protect is off SCSI device sda: drive cache: write back SCSI device sda: 78125000 512-byte hdwr sectors (40000 MB) sda: Write Protect is off SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |