[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [Xen-devel] PAE mode errors: in shadow.c
Keir Fraser wrote: > You probably just need to 'make clean' before you 'pae=y make'. > > -- Keir Yes. If you build just xen, you need 'pae=y' (or export pae=y) as well as XEN_TARGET_X86_PAE. Jun > > On 5 May 2006, at 11:41, pak333@xxxxxxxxxxx wrote: > >> >> Looks like the file shadow.c has not been updated to support PAE >> thought it says "Extended to support 32-bit PAE and 64-bit guests" >> at the beginning of the file If anyone has a pacth for this, please >> share with me >> >> Thanks >> - Padma >>> -------------- Original message -------------- >>> From: pak333@xxxxxxxxxxx >>> >>> Maybe the attachment isn't going thru. here are the errors >>> --------------------------- make -C xen install >>> >>> >>> make[1]: Entering directory `/home/xen-unstable/xen' >>> >>> make -C tools >>> >>> make[2]: Entering directory `/home/xen-unstable/xen/tools' >>> >>> make -C figlet >>> >>> make[3]: Entering directory `/home/xen-unstable/xen/tools/figlet' >>> >>> make[3]: `figlet' is up to date. >>> >>> make[3]: Leaving directory `/home/xen-unstable/xen/tools/figlet' >>> >>> make symbols >>> >>> make[3]: Entering directory `/home/xen-unstable/xen/tools' >>> >>> make[3]: `symbols' is up to date. >>> >>> make[3]: Leaving directory `/home/xen-unstable/xen/tools' >>> >>> make[2]: Leaving directory `/home/xen-unstable/xen/tools' >>> >>> make include/xen/compile.h >>> >>> make[2]: Entering directory `/home/xen-unstable/xen' >>> >>> tools/figlet/figlet -d tools/figlet Xen 3.0.0 > >>> include/xen/banner.h.new >>> >>> __ __ _____ ___ ___ >>> >>> \ \/ /___ _ __ |___ / / _ \ / _ \ >>> >>> \ // _ \ '_ \ |_ \| | | | | | | >>> >>> / \ __/ | | | ___) | |_| | |_| | >>> >>> /_/\_\___|_| |_| |____(_)___(_)___/ >>> >>> make[2]: Leaving directory `/home/xen-unstable/xen' >>> >>> make include/xen/acm_policy.h >>> >>> make[2]: Entering directory `/home/xen-unstable/xen' >>> >>> make[2]: `include/xen/acm_policy.h' is up to date. >>> >>> make[2]: Leaving directory `/home/xen-unstable/xen' >>> >>> [ -e include/asm ] || ln -sf asm-x86 include/asm >>> >>> make -C arch/x86 asm-offsets.s >>> >>> make[2]: Entering directory `/home/xen-unstable/xen/arch/x86' >>> >>> make[2]: `asm-offsets.s' is up to date. >>> >>> make[2]: Leaving directory `/home/xen-unstable/xen/arch/x86' >>> >>> make include/asm-x86/asm-offsets.h >>> >>> make[2]: Entering directory `/home/xen-unstable/xen' >>> >>> make[2]: `include/asm-x86/asm-offsets.h' is up to date. >>> >>> make[2]: Leaving directory `/home/xen-unstable/xen' >>> >>> make -C common >>> >>> make[2]: Entering directory `/home/xen-unstable/xen/common' >>> >>> gcc -Wdeclaration-after-statement -nostdinc -fno-builtin -fno-common >>> -fno-strict-aliasing -iwithprefix include -Wall -Werror >>> -Wno-pointer-arith -pipe -I/home/xen-unstable/xen/include >>> -I/home/xen-unstable/xen/include/asm-x86/mach-generic >>> -I/home/xen-unstable/xen/include/asm-x86/mach-default -O3 >>> -fomit-frame-pointer -msoft-float -m32 -march=i686 -DNDEBUG -c >>> kernel.c -o kernel.o >>> >>> ld -m elf_i386 -r -o common.o acm_ops.o ac_timer.o bitmap.o >>> dom0_ops.o domain.o elf.o event_channel.o grant_table.o kernel.o >>> keyhandler.o lib.o memory.o multicall.o page_alloc.o sched_bvt.o >>> sched_sedf.o schedule.o softirq.o string.o symbols.o trace.o >>> vsprintf.o xmalloc.o >>> >>> make[2]: Leaving directory `/home/xen-unstable/xen/common' >>> >>> make -C drivers >>> >>> make[2]: Entering directory `/home/xen-unstable/xen/drivers' >>> >>> make -C char >>> >>> make[3]: Entering directory `/home/xen-unstable/xen/drivers/char' >>> >>> gcc -Wdeclaration-after-statement -nostdinc -fno-builtin -fno-common >>> -fno-strict-aliasing -iwithprefix include -Wall -Werror >>> -Wno-pointer-arith -pipe -I/home/xen-unstable/xen/include >>> -I/home/xen-unstable/xen/include/asm-x86/mach-generic >>> -I/home/xen-unstable/xen/include/asm-x86/mach-default -O3 >>> -fomit-frame-pointer -msoft-float -m32 -march=i686 -DNDEBUG -c >>> console.c -o console.o >>> >>> ld -m elf_i386 -r -o driver.o console.o ns16550.o serial.o >>> >>> make[3]: Leaving directory `/home/xen-unstable/xen/drivers/char' >>> >>> make -C acpi >>> >>> make[3]: Entering directory `/home/xen-unstable/xen/drivers/acpi' >>> >>> make[3]: Nothing to be done for `default'. >>> >>> make[3]: Leaving directory `/home/xen-unstable/xen/drivers/acpi' >>> >>> make[2]: Leaving directory `/home/xen-unstable/xen/drivers' >>> >>> make -C arch/x86 >>> >>> make[2]: Entering directory `/home/xen-unstable/xen/arch/x86' >>> >>> gcc -Wdeclaration-after-statement -nostdinc -fno-builtin -fno-common >>> -fno-strict-aliasing -iwithprefix include -Wall -Werror >>> -Wno-pointer-arith -pipe -I/home/xen-unstable/xen/include >>> -I/home/xen-unstable/xen/include/asm-x86/mach-generic >>> -I/home/xen-unstable/xen/include/asm-x86/mach-default -O3 >>> -fomit-frame-pointer -msoft-float -m32 -march=i686 -DNDEBUG -c >>> shadow.c -o shadow.o >>> >>> In file included from shadow.c:37: >>> >>> /home/xen-unstable/xen/include/asm/shado L2_PAGETABLE_SHIFTw_64.h: >>> In function `table_offset_64': >>> >>> /home/xen-unstable/xen/include/asm/shadow_64.h:105: error: >>> `L3_PAGETABLE_SHIFT' undeclared (first use in this function) >>> >>> /home/xen-unstable/xen/include/asm/shadow_64.h:105: error: (Each >>> undeclared identifier is reported only once >>> >>> /home/xen-unstable/xen/include/asm/shadow_64.h:105: error: for each >>> function it appears in.) >>> >>> /home/xen-unstable/xen/include/asm/shadow_64.h:105: error: >>> `L3_PAGETABLE_ENTRIES' undeclared (first use in this function) >>> >>> /home/xen-unstable/xen/include/asm/shadow_64.h: In function >>> `free_out_of_sync_state': >>> >>> /home/xen-unstable/xen/include/asm/shadow_64.h:137: warning: >>> implicit declaration of function `release_out_of_sync_entry' >>> >>> /home/xen-unstable/xen/include/asm/shadow_64.h: In function >>> `__entry': >>> >>> /home/xen-unstable/xen/include/asm/shadow_64.h:164: error: >>> dereferencing pointer to incomplete type >>> >>> /home/xen-unstable/xen/include/asm/shadow_64.h: At top level: >>> >>> /home/xen-unstable/xen/include/asm/shadow_64.h:239: error: >>> conflicting types for '__guest_set_l2e' >>> >>> /home/xen-unstable/xen/include/asm/shadow.h:545: error: previous >>> definition of '__guest_set_l2e' was here >>> >>> /home/xen-unstable/xen/include/asm/shadow_64.h:265: error: >>> conflicting types for '__guest_get_l2e' >>> >>> /home/xen-unstable/xen/include/asm/shadow.h:538: error: previous >>> definition of '__guest_get_l2e' was here >>> >>> /home/xen-unstable/xen/include/asm/shadow_64.h: In function >>> `entry_general': >>> >>> /home/xen-unstable/xen/include/asm/shadow_64.h:397: error: >>> dereferencing pointer to incomplete type >>> >>> shadow.c: In function `alloc_shadow_page': >>> >>> shadow.c:226: error: dereferencing pointer to incomplete type >>> >>> shadow.c:381: error: dereferencing pointer to incomplete type >>> >>> shadow.c: At top level: >>> >>> shadow.c:547: warning: static declaration of >>> 'shadow_map_l1_into_current_l2' follows non-static declaration >>> >>> /home/xen-unstable/xen/include/asm/shadow.h:1521: warning: previous >>> declaration of 'shadow_map_l1_into_current_l2' was here >>> >>> shadow.c:684: error: redefinition of 'shadow_set_l1e' >>> >>> /home/xen-unstable/xen/include/asm/shadow.h:1525: error: previous >>> definition of 'shadow_set_l1e' was here >>> >>> shadow.c:1026: warning: static declaration of >>> 'shadow_mark_va_out_of_sync' follows non-static declaration >>> >>> /home/xen-unstable/xen/include/asm/shadow.h:745: warning: previous >>> declaration of 'shadow_mark_va_out_of_sync' was here >>> >>> shadow.c: In function `remove_all_write_access': >>> >>> shadow.c:1387: warning: implicit declaration of function >>> `MFN_PINNED' >>> >>> shadow.c: In function `resync_all': >>> >>> shadow.c:1549: error: dereferencing pointer to incomplete type >>> >>> shadow.c:1583: warning: ISO C90 forbids mixed declarations and code >>> >>> shadow.c:1626: warning: ISO C90 forbids mixed declarations and code >>> >>> shadow.c: In function `sync_all': >>> >>> shadow.c:1810: error: dereferencing pointer to incomplete type >>> >>> shadow.c: At top level: >>> >>> shadow.c:1839: error: redefinition of 'l1pte_write_fault' >>> >>> /home/xen-unstable/xen/include/asm/shadow.h:750: error: previous >>> definition of 'l1pte_write_fault' was here >>> >>> shadow.c:1875: error: redefinition of 'l1pte_read_fault' >>> >>> /home/xen-unstable/xen/include/asm/shadow.h:786: error: previous >>> definition of 'l1pte_read_fault' was here >>> >>> shadow.c:3590: error: variable `MODE_A_HANDLER' has initializer but >>> incomplete type >>> >>> shadow.c:3591: error: unknown field `guest_paging_levels' specified >>> in initializer >>> >>> shadow.c:3591: warning: excess elements in struct initializer >>> >>> shadow.c:3591: warning: (near initialization for `MODE_A_HANDLER') >>> >>> shadow.c:3592: error: unknown field `invlpg' specified in >>> initializer >>> >>> shadow.c:3592: warning: excess elements in struct initializer >>> >>> shadow.c:3592: warning: (near initialization for `MODE_A_HANDLER') >>> >>> shadow.c:3593: error: unknown field `fault' specified in initializer >>> >>> shadow.c:3593: warning: excess elements in struct initializer >>> >>> shadow.c:3593: warning: (near initialization for `MODE_A_HANDLER') >>> >>> shadow.c:3594: error: unknown field `update_pagetables' specified >>> in initializer >>> >>> shadow.c:3594: warning: excess elements in struct initializer >>> >>> shadow.c:3594: warning: (near initialization for `MODE_A_HANDLER') >>> >>> shadow.c:3595: error: unknown field `sync_all' specified in >>> initializer >>> >>> shadow.c:3595: warning: excess elements in struct initializer >>> >>> shadow.c:3595: warning: (near initialization for `MODE_A_HANDLER') >>> >>> shadow.c:3596: error: unknown field `remove_all_write_access' >>> specified in initializer >>> >>> shadow.c:3596: warning: excess elements in struct initializer >>> >>> shadow.c:3596: warning: (near initialization for `MODE_A_HANDLER') >>> >>> shadow.c:3597: error: unknown field `do_update_va_mapping' >>> specified in initializer >>> >>> shadow.c:3597: warning: excess elements in struct initializer >>> >>> shadow.c:3597: warning: (near initialization for `MODE_A_HANDLER') >>> >>> shadow.c:3598: error: unknown field `mark_mfn_out_of_sync' >>> specified in initializer >>> >>> shadow.c:3598: warning: excess elements in struct initializer >>> >>> shadow.c:3598: warning: (near initialization for `MODE_A_HANDLER') >>> >>> shadow.c:3599: error: unknown field `is_out_of_sync' specified in >>> initializer >>> >>> shadow.c:3599: warning: excess elements in struct initializer >>> >>> shadow.c:3599: warning: (near initialization for `MODE_A_HANDLER') >>> >>> shadow.c:3600: error: unknown field `gva_to_gpa' specified in >>> initializer >>> >>> shadow.c:3600: error: `gva_to_gpa_64' undeclared here (not in a >>> function) >>> >>> shadow.c:3600: warning: excess elements in struct initializer >>> >>> shadow.c:3600: warning: (near initialization for `MODE_A_HANDLER') >>> >>> shadow.c:3590: error: storage size of `MODE_A_HANDLER' isn't known >>> >>> make[2]: *** [shadow.o] Error 1 >>> >>> make[2]: Leaving directory `/home/xen-unstable/xen/arch/x86' >>> >>> make[1]: *** [/home/xen-unstable/xen/xen] Error 2 >>> >>> make[1]: Leaving directory `/home/xen-unstable/xen' >>> >>> make: *** [install-xen] Error 2 >>>> -------------- Original message -------------- >>>> From: pak333@xxxxxxxxxxx >>>> Looks like the attachement did not go thru. Attached error file >>>> again. Let me know if you cannot see the attached file Changed >>>> memory to 16GB and still get errros >>>> - padma >>>> >>>> >>>>> -------------- Original message -------------- >>>>> From: Anthony Liguori <aliguori@xxxxxxxxxx> >>>>> >>>>>> pak333@xxxxxxxxxxx wrote: >>>>>>> Thanks, I just tried this and it gives me a bunch of errors >>>>>> >>>>>> Care to share those errors? :-) >>>>>> >>>>>> Regards, >>>>>> >>>>>> Anthony Liguori >>>>>> >>>>>>> - Padma >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -------------- Original message -------------- >>>>>>> From: Anthony Liguori >>>>>>> >>>>>>>> You need to rebuild Xen (the hypervisor) with pae support. >>>>>>>> >>>>>>>> I believe it's something like make pae=yes >>>>>>>> >>>>>>>> Regards, >>>>>>>> >>>>>>>> Anthony Liguori >>>>>>>> >>>>>>>> pak333@xxxxxxxxxxx wrote: >>>>>>>>> Hi, >>>>>>> ; ; ; > > >>>>>>>>> I just added 32GB memory in my system and wanted Xen to see >>>>>>>>> that memory, so enabled PAE in xen0 and XenU. I did a make >>>>>>>>> menuconfig in xen0 and xenU, then did a make in xen-unstable >>>>>>>>> and a make install. >>>>>>>>> >>>>>>>>> Whilebooting this kernel, I get the above error PAE mode >>>>>>>>> mismatch. I looked under xen/include/asm-x86/processor.h has >>>>>>>>> #define X86_CR4_PAE defined and so does cpufeature.h have >>>>>>>>> this defined. #define X86_FEATURE_PAE >>>>>>> ! > &g t; >>>>>>>>> What else should I have done to enable a PAE enabled Xen >>>>>>>>> kernel. I am using xen 3.0.0 (xen-unstable) and cannot move >>>>>>>>> to 3.02 due to xenoprofile not ready there >>>>>>>>> >>>>>>>> ; &g t; Thanks >>>>>>>>> - Padma >>>>>>>>> >>>>>>> >>>>> -------------------------------------------------------------------- >>>>> ---- >>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Xen-devel mailing list >>>>>>>>> Xen-devel@xxxxxxxxxxxxxxxxxxx >>>>>>>>> http://lists.xensource.com/xen-devel >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Xen-devel mailing list >>>>>>>> Xen-devel@xxxxxxxxxxxxxxxxxxx >>>>>>>> http://lists.xensource.com/xen-devel >>>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Xen-devel mailing list >>>>>> Xen-devel@xxxxxxxxxxxxxxxxxxx >>>>>> http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |