[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xen-devel] network-bridge defunct
- To: Ewan Mellor <ewan@xxxxxxxxxxxxx>
- From: Michael Lessard <michael.lessard@xxxxxxxxx>
- Date: Tue, 25 Oct 2005 15:49:09 -0400
- Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
- Delivery-date: Tue, 25 Oct 2005 19:46:21 +0000
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=NmwrjmnW9qZMNhWS6/MD3l/FAR4GwjZVL0q4Knn5DHxAmpl7k2psPGlEyd999UfvketGpFBf/rosPi4ghbsK630y3GFpxQOUolxfol2NO3ahozKXI6VQZl+O8tdDlF9fJ7NLWYomdBrnX96AyEo5TNPGMJZAzdo1J+t479VYLNs=
- List-id: Xen developer discussion <xen-devel.lists.xensource.com>
On 10/18/05, Michael Lessard <michael.lessard@xxxxxxxxx> wrote:
On 10/18/05, Ewan Mellor <
ewan@xxxxxxxxxxxxx> wrote:
On Tue, Oct 18, 2005 at 09:48:07AM -0400, Michael Lessard wrote:
> Hi everybody !
>
> I haved use Xen 2.06 with my two Domains from some months and all working
> pretty good ! Now i have remove Xen
2.06 and put Xen 3 (unstable.hg) , i
> haved build this morning with make world and make install. My Dom0 and
> DomU starts successfuly, but on my Dom0 i haved network-bridge defunct
> when i type ps -aux, so you imagne that in DomU netwrok wan't work :(
The defunct network-bridge is not a problem. There are other problems with
networking, and I'll let other people answer, because I don't have a handle on
them at the moment, but the defunct network-bridge process isn't a problem in
and of itself.
Ewan.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
# brctl addif xen-testbridge eth0
error on eth0
but if i use :
# brctl addbr xen-testbridge
# brctl addif xen-testbridge eth0
no error reported ...
But i thinkg to make it work with Xen, i need other things...
With latest mercurial source, network-bridge defunct is now ok ;)
But i still could not ping my Dom0 for DomU ...
My setup :
2 Network Carfs on Debian Sid for both of my domains (Dom0 and DomU)
1 network cards (eth0) for my DomU, the config for network cards on Dom0 is :
iface eth0 inet manual
up /sbin/ifconfig eth0 up
When i start DomU, i see appear vif1.0 , when i ping Dom0 from Dom0 i see only RX bytes growth
On Dom0 , i have do echo "1" > /proc/sys/net/ipv4/ip_forward and iptables -P FORWARD ACCEPT
My xen config for DomU :
kernel = "/boot/vmlinuz-2.6.12-xenU"
memory = 200
name = "Albert"
nics=1
vif = [ 'mac=aa:00:00:00:00:11, bridge=xenbr0' ]
disk = [ 'phy:/dev/hdc3,hdc3,w', 'phy:/dev/hdc5,hdc5,w', 'phy:/dev/hdc1,hdc1,w' ]
root = "/dev/hdc3 ro"
I have try with and without mac address specified ...
What's wrong with my setup ?
thanks
Michael
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
