__ __ _____ ___ _ _ \ \/ /___ _ __ |___ / / _ \ __| | _____ _____| | \ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ | / \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ | /_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_| http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.0-devel (root@site) (gcc version 3.3.3 (SuSE Linux)) Wed May 4 13:47:02 EDT 2005 Latest ChangeSet: 2005/05/04 09:46:22 1.1428 42788bdeo6dq0hEkwcye0RH_ljmY1Q (XEN) WARNING: Only the first 4GB of the physical memory map can be accessed (XEN) by Xen in 32-bit mode. Truncating the memory map... (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000ebaf0 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000dffd0000 (usable) (XEN) 00000000dffd0000 - 00000000dffdf000 (ACPI data) (XEN) 00000000dffdf000 - 00000000e0000000 (ACPI NVS) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000ffc00000 - 0000000100000000 (reserved) (XEN) System RAM: 3583MB (3669436kB) (XEN) Xen heap: 10MB (10724kB) (XEN) CPU0: Before vendor init, caps: bfebfbff 20000000 00000000, vendor = 0 (XEN) CPU#0: Physical ID: 0, Logical ID: 0 (XEN) CPU caps: bfebfbff 20000000 00000000 00000000 (XEN) found SMP MP-table at 000ff780 (XEN) ACPI: RSDP (v000 ACPIAM ) @ 0x000f6be0 (XEN) ACPI: RSDT (v001 A M I OEMRSDT 0x10000418 MSFT 0x00000097) @ 0xdffd0000 (XEN) ACPI: FADT (v002 A M I OEMFACP 0x10000418 MSFT 0x00000097) @ 0xdffd0200 (XEN) ACPI: MADT (v001 A M I OEMAPIC 0x10000418 MSFT 0x00000097) @ 0xdffd0390 (XEN) ACPI: MCFG (v001 Intel Cayuse 0x00000001 MSFT 0x00000001) @ 0xdffd0420 (XEN) ACPI: OEMB (v001 A M I AMI_OEM 0x10000418 MSFT 0x00000097) @ 0xdffdf040 (XEN) ACPI: HPET (v001 A M I OEMHPET 0x10000418 MSFT 0x00000097) @ 0xdffd7460 (XEN) ACPI: DSDT (v001 CYCRB CYCRB045 0x00000045 INTL 0x02002026) @ 0x00000000 (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 Unknown CPU [15:3] APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) (XEN) Processor #6 Unknown CPU [15:3] APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) (XEN) Processor #1 Unknown CPU [15:3] APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) (XEN) Processor #7 Unknown CPU [15:3] APIC version 20 (XEN) Using ACPI for processor (LAPIC) configuration information (XEN) Intel MultiProcessor Specification v1.4 (XEN) Virtual Wire compatibility mode. (XEN) OEM ID: TEMPLATE Product ID: ETEMPLATE APIC at: 0xFEE00000 (XEN) I/O APIC #8 Version 32 at 0xFEC00000. (XEN) I/O APIC #9 Version 32 at 0xFEC80000. (XEN) I/O APIC #10 Version 32 at 0xFEC80400. (XEN) Enabling APIC mode: Flat. Using 3 I/O APICs (XEN) Processors: 4 (XEN) Using scheduler: Borrowed Virtual Time (bvt) (XEN) Initializing CPU#0 (XEN) Detected 3400.297 MHz processor. (XEN) CPU0 booted (XEN) enabled ExtINT on CPU#0 (XEN) Booting processor 1/1 eip 90000 (XEN) Initializing CPU#1 (XEN) masked ExtINT on CPU#1 (XEN) CPU1: Before vendor init, caps: bfebfbff 20000000 00000000, vendor = 0 (XEN) CPU#1: Physical ID: 0, Logical ID: 1 (XEN) CPU caps: bfebfbff 20000000 00000000 00000000 (XEN) CPU1 has booted. (XEN) Booting processor 2/6 eip 90000 (XEN) Initializing CPU#2 (XEN) masked ExtINT on CPU#2 (XEN) CPU2: Before vendor init, caps: bfebfbff 20000000 00000000, vendor = 0 (XEN) CPU#2: Physical ID: 3, Logical ID: 0 (XEN) CPU caps: bfebfbff 20000000 00000000 00000000 (XEN) CPU2 has booted. (XEN) Booting processor 3/7 eip 90000 (XEN) Initializing CPU#3 (XEN) masked ExtINT on CPU#3 (XEN) CPU3: Before vendor init, caps: bfebfbff 20000000 00000000, vendor = 0 (XEN) CPU#3: Physical ID: 3, Logical ID: 1 (XEN) CPU caps: bfebfbff 20000000 00000000 00000000 (XEN) CPU3 has booted. (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) Setting 8 in the phys_id_present_map (XEN) ...changing IO-APIC physical APIC ID to 8 ... ok. (XEN) Setting 9 in the phys_id_present_map (XEN) ...changing IO-APIC physical APIC ID to 9 ... ok. (XEN) Setting 10 in the phys_id_present_map (XEN) ...changing IO-APIC physical APIC ID to 10 ... ok. (XEN) init IO_APIC IRQs (XEN) vector_irq[49] = 1 (XEN) vector_irq[51] = 3 (XEN) vector_irq[59] = 4 (XEN) vector_irq[61] = 5 (XEN) vector_irq[69] = 6 (XEN) vector_irq[71] = 8 (XEN) vector_irq[79] = 9 (XEN) vector_irq[81] = 12 (XEN) vector_irq[89] = 13 (XEN) vector_irq[91] = 14 (XEN) vector_irq[99] = 15 (XEN) vector_irq[a1] = 16 (XEN) vector_irq[a9] = 17 (XEN) vector_irq[b1] = 18 (XEN) vector_irq[b9] = 19 (XEN) vector_irq[c1] = 22 (XEN) vector_irq[c9] = 23 (XEN) vector_irq[d1] = 30 (XEN) vector_irq[d9] = 31 (XEN) vector_irq[e1] = 47 (XEN) vector_irq[e9] = 71 (XEN) ..TIMER: vector=0x41 pin1=2 pin2=0 (XEN) Using local APIC timer interrupts. (XEN) Calibrating APIC timer for CPU0... (XEN) ..... CPU clock speed is 3400.0685 MHz. (XEN) ..... host bus clock speed is 200.0039 MHz. (XEN) ..... bus_scale = 0x0000CCD7 (XEN) checking TSC synchronization across CPUs: passed. (XEN) Time init: (XEN) .... cpu_freq: 00000000:CAAC6B7C (XEN) .... scale: 00000001:2D266F30 (XEN) .... Wall Clock: 1115215286s 620000us (XEN) mtrr: v2.0 (20020519) (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC00000 00,LOADER=generic' (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 08000000->10000000 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c05c23c4 (XEN) Init. ramdisk: c05c3000->c0ade400 (XEN) Phys-Mach map: c0adf000->c0aff000 (XEN) Page tables: c0aff000->c0b03000 (XEN) Start info: c0b03000->c0b04000 (XEN) Boot stack: c0b04000->c0b05000 (XEN) TOTAL: c0000000->c0c00000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Initrd len 0x51b400, start at 0xc05c3000 (XEN) Scrubbing Free RAM: ....................................done. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). Linux version 2.6.11-xen0 (root@xen-box) (gcc version 3.3.3 (SuSE Linux)) #2 Wed May 4 1 3:47:25 EDT 2005 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000008000000 (usable) 128MB LOWMEM available. DMI not present. ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48]) IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 3 I/O APICs Using ACPI (MADT) for SMP configuration information IRQ lockup detection disabled Allocating PCI resources starting at 08000000 (gap: 08000000:f8000000) Built 1 zonelists Kernel command line: root=/dev/system/root ro Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Xen reported: 3400.297 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 119296k/131072k available (3239k kernel code, 11628k reserved, 1023k data, 348k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Intel(R) Xeon(TM) CPU 3.40GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... disabled checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 5229k freed NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs *7) ACPI: PCI Interrupt Link [LNKB] (IRQs *7) ACPI: PCI Interrupt Link [LNKC] (IRQs *7) ACPI: PCI Interrupt Link [LNKD] (IRQs *7) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) xen_mem: Initialising balloon driver. SCSI subsystem initialized usbcore: registered new driver hub PCI: IRQ init PCI: Interrupt Routing Table found at 0xfbfdd790 PCI: Attempting to find IRQ router for 8086:24d0 PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0 PCI: IRQ fixup IRQ for 0000:00:02.0[A] -> PIRQ 60, mask 0080, excl 0000<4>PCI: IRQ 0 for device 0000:00 :02.0 doesn't match PIRQ mask - try pci=usepirqmask -> newirq=0 ... failed IRQ for 0000:00:04.0[A] -> PIRQ 60, mask 0080, excl 0000<4>PCI: IRQ 0 for device 0000:00 :04.0 doesn't match PIRQ mask - try pci=usepirqmask -> newirq=0 ... failed IRQ for 0000:00:06.0[A] -> PIRQ 60, mask 0080, excl 0000<4>PCI: IRQ 0 for device 0000:00 :06.0 doesn't match PIRQ mask - try pci=usepirqmask -> newirq=0 ... failed IRQ for 0000:00:1f.2[A] -> PIRQ 62, mask 0080, excl 0000<4>PCI: IRQ 0 for device 0000:00 :1f.2 doesn't match PIRQ mask - try pci=usepirqmask -> newirq=0 ... failed IRQ for 0000:02:00.0[A] -> PIRQ 60, mask 0080, excl 0000<4>PCI: IRQ 0 for device 0000:02 :00.0 doesn't match PIRQ mask - try pci=usepirqmask -> newirq=0 ... failed IRQ for 0000:02:00.2[B] -> PIRQ 61, mask 0080, excl 0000<4>PCI: IRQ 0 for device 0000:02 :00.2 doesn't match PIRQ mask - try pci=usepirqmask -> newirq=0 ... failed PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@xxxxxx ** so I can fix the driver. Grant table initialized IA-32 Microcode Update Driver: v1.14-xen Initializing Cryptographic API IOAPIC[0]: Invalid reference to IRQ 0 ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1 IOAPIC[0]: Invalid reference to IRQ 0 ACPI: PS/2 Mouse Controller [PS2M] at irq 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 2.6.4) Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2 Copyright (c) 1999-2004 Intel Corporation. pcnet32.c:v1.30i 06.28.2004 tsbogend@xxxxxxxxxxxxxxxx e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI e100: Copyright(c) 1999-2004 Intel Corporation ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22 e100: eth0: e100_probe: addr 0xfe3fe000, irq 22, MAC addr 00:02:B3:5F:AB:69 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Xen virtual console successfully installed as ttyS0 Event-channel device installed. Blkif backend is using grant tables. Initialising Xen netif backend Blkif frontend is using grant tables. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: TEAC DW-548D, ATAPI CD/DVD-ROM drive ide1: I/O resource 0x170-0x177 not free. ide1: ports already in use, skipping probe ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ACPI: PCI interrupt 0000:04:03.0[A] -> GSI 30 (level, low) -> IRQ 30 ACPI: PCI interrupt 0000:04:03.1[B] -> GSI 31 (level, low) -> IRQ 31 scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs (scsi0:A:5): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) (scsi0:A:6): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Vendor: MAXTOR Model: ATLAS10K4_73WLS Rev: DFV0 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:5:0: Tagged Queuing enabled. Depth 32 Vendor: MAXTOR Model: ATLAS10K4_73WLS Rev: DFV0 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:6:0: Tagged Queuing enabled. Depth 32 scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs Red Hat/Adaptec aacraid driver (1.1.2-lk2 May 4 2005) 3ware Storage Controller device driver for Linux v1.26.02.000. ata_piix: combined mode detected ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 ata: 0x1f0 IDE port busy ata1: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15 ata1: SATA port has no device. scsi2 : ata_piix SCSI device sda: 143666192 512-byte hdwr sectors (73557 MB) SCSI device sda: drive cache: write back SCSI device sda: 143666192 512-byte hdwr sectors (73557 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 5, lun 0 SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB) SCSI device sdb: drive cache: write back sdb: Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0 Fusion MPT base driver 3.01.18 Copyright (c) 1999-2004 LSI Logic Corporation Fusion MPT SCSI Host driver 3.01.18 USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: irq 16, io base 0xe800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: irq 19, io base 0xe880 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: irq 18, io base 0xec00 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS2++ Logitech Wheel Mouse on isa0060/serio1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 1394.400 MB/sec raid5: using function: pIII_sse (1394.400 MB/sec) md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 5228KiB [1 disk] into ram disk... done. VFS: Mounted root (ext2 filesystem). device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx ReiserFS: dm-1: found reiserfs format "3.6" with standard journal ReiserFS: dm-1: using ordered data mode ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max tran s len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-1: checking transaction log (dm-1) ReiserFS: dm-1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 348k freed *************************************************************** *************************************************************** ** WARNING: Currently emulating unsupported memory accesses ** ** in /lib/tls libraries. The emulation is very ** ** slow. To ensure full performance you should ** ** execute the following as root: ** ** mv /lib/tls /lib/tls.disabled ** *************************************************************** *************************************************************** Continuing... ReiserFS: dm-1: warning: acl not supported. ReiserFS: dm-1: warning: acl not supported. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ReiserFS: sda1: warning: acl not supported. ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max tran s len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names Adding 8388600k swap on /dev/system/swap. Priority:42 extents:1 e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ACPI: Power Button (FF) [PWRF] (XEN) mtrr: type mismatch for fd000000,800000 old: uncachable new: write-combining (XEN) mtrr: type mismatch for fd000000,800000 old: uncachable new: write-combining