[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] hdc: lost interrupt
I am seeing a kernel message, "hdc: lost interrupt", when running LTP on the xen0 domain. The first time I saw the 'kernel: hdc: lost interrupt' in /var/log/messages, I was running LTP on both xen0 and xenU domains. The xenU domain was totally hung at this point. Suspecting a setup error, I re-checked the installation and reran LTP on xen0 alone, without having anything running on xenU. Again, I saw the error. To rule out a hardware problem, I decided to run the same tests on a regular kernel from kernel.org (2.6.10) and on the RHEL 4 kernel from Red Hat, both of which ran without showing the error. I don't know what to make of it. I am not suspecting a hardware error since the message does not show up when running on non-xen kernels. Setup Platform: RHEL 4 Beta 3 Hw: IBM xSeries 200, with a 866Mhz Pentium III and 512MB RAM,IDE drive: 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) The machine is not the most modern, but it has worked reliably. Regards, David Barrera ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |