[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] save / migrate not working on gentoo?
Hi all,I've tested several versions of Xen (2.0, 2.0.3, 2.0-testing, unstable) on different machines (VIA C3, PIII, AMD XP), all running up-to-date gentoo system and I'm unable to migrate (or even save) domains on any of those machines. Currently I'm making tests mainly on the Athlon box, on which I've tried two GCC versions - 3.3.5 at first, later I've recompiled glibc and then Xen 2.0.3 with gcc 3.4.2; still no luck. xend is running, xfrd is running, all requirements are installed (twisted 1.3, ip, brctl), virt-1 domain is running against local 'file' based VBDs. # xm dmesg | grep versionXen version 2.0.3 (root@here) (gcc version 3.4.2 (Gentoo Linux 3.4.2-r2, ssp-3.4.1-1, pie-8.7.6.5 )) Tue Jan 18 21:14:17 CET 2005 # xm list Name Id Mem(MB) CPU State Time(s) Console Domain-0 0 91 0 r---- 138106.9 virt-1 2 127 0 -b--- 7.9 9602 # xm save virt-1 virt-1.saveError: Error: [Failure instance: Traceback: xen.xend.XendError.XendError, save failed # xm migrate virt-1 localhostError: Error: [Failure instance: Traceback: xen.xend.XendError.XendError, migrate failed Logs for the 'save' attempt are attached. Any hints? TIA Dave 25601 [INF] XFRD> Accepted connection from 127.0.0.1:1115 on 2 25667 [INF] XFRD> Xfr service for 127.0.0.1:1115 [DEBUG] Conn_init> flags=1 [DEBUG] Conn_init> write stream... [DEBUG] stream_init>mode=w flags=1 compress=0 [DEBUG] stream_init> unbuffer... [DEBUG] stream_init< err=0 [DEBUG] Conn_init> read stream... [DEBUG] stream_init>mode=r flags=1 compress=0 [DEBUG] stream_init> unbuffer... [DEBUG] stream_init< err=0 [DEBUG] Conn_sxpr> (xfr.hello 1 0)[DEBUG] Conn_sxpr< err=0 [DEBUG] Conn_sxpr> (xfr.save 2 "(domain (id 2) (name virt-1) (memory 127) (maxmem 131072) (state -b---) (cpu 0) (cpu_time 7.66579571) (up_time 45.2437880039) (start_time 1106262818.13) (console (status listening) (id 13) (domain 2) (local_port 13) (remote_port 1) (console_port 9602)) (devices (vif (idx 0) (vif 0) (mac aa:00:00:2a:f6:2a) (evtchn 17 4) (index 0)) (vbd (idx 0) (vdev 2049) (device 1792) (mode w) (dev sda1) (uname file:/xen/virt-1) (node /dev/loop0) (index 0)) (vbd (idx 1) (vdev 2050) (device 1793) (mode w) (dev sda2) (uname file:/xen/virt-1.swap) (node /dev/loop1) (index 1))) (config (vm (name virt-1) (memory 128) (image (linux (kernel /boot/vmlinuz-2.6.10-xenU) (ip 192.168.0.31:1.2.3.4:192.168.0.1:255.255.254.0:gentoo:eth0:off) (root '/dev/sda1 ro'))) (device (vbd (uname file:/xen/virt-1) (dev sda1) (mode w))) (device (vbd (uname file:/xen/virt-1.swap) (dev sda2) (mode w))) (device (vif (mac aa:00:00:2a:f6:2a))))))" /xen/virt-1.save)[DEBUG] Conn_sxpr< err=0 [1106262863.378546] xc_linux_save start 2 xc_linux_save start 2 network start bridge=xen-br0 netdev=eth0 antispoof=no VIRTUAL MEMORY ARRANGEMENT: Loaded kernel: c0100000->c0451144 Init. ramdisk: c0452000->c0452000 Phys-Mach map: c0452000->c0472000 Page tables: c0472000->c0475000 Start info: c0475000->c0476000 Boot stack: c0476000->c0477000 TOTAL: c0000000->c0800000 ENTRY ADDRESS: c0100000 /dev/loop: Is a directory /dev/loop: Is a directory ioctl: LOOP_SET_FD: Device or resource busy vif-bridge up vif=vif2.0 domain=virt-1 mac=aa:00:00:2a:f6:2a bridge=xen-br0 recv_fe_driver_status> {'status': 1} recv_fe_driver_status> recv_fe_interface_connect {'tx_shmem_frame': 17426, 'rx_shmem_frame': 18698, 'handle': 0} sync_session> <type 'str'> 1 ['save', ['id', '1'], ['state', 'begin'], ['domain', '2'], ['file', '/xen/virt-1.save']] Started to connect self= <xen.xend.XendMigrate.XfrdClientFactory instance at 0xb76c34cc> connector= <twisted.internet.tcp.Connector instance at 0xb76c34ec> buildProtocol> IPv4Address(TCP, 'localhost', 8002) ***request> (domain (id 2) (name virt-1) (memory 127) (maxmem 131072) (state -b---) (cpu 0) (cpu_time 7.66579571) (up_time 45.2407670021) (start_time 1106262818.13) (console (status listening) (id 13) (domain 2) (local_port 13) (remote_port 1) (console_port 9602)) (devices (vif (idx 0) (vif 0) (mac aa:00:00:2a:f6:2a) (evtchn 17 4) (index 0)) (vbd (idx 0) (vdev 2049) (device 1792) (mode w) (dev sda1) (uname file:/xen/virt-1) (node /dev/loop0) (index 0)) (vbd (idx 1) (vdev 2050) (device 1793) (mode w) (dev sda2) (uname file:/xen/virt-1.swap) (node /dev/loop1) (index 1))) (config (vm (name virt-1) (memory 128) (image (linux (kernel /boot/vmlinuz-2.6.10-xenU) (ip 192.168.0.31:1.2.3.4:192.168.0.1:255.255.254.0:gentoo:eth0:off) (root '/dev/sda1 ro'))) (device (vbd (uname file:/xen/virt-1) (dev sda1) (mode w))) (device (vbd (uname file:/xen/virt-1.swap) (dev sda2) (mode w))) (device (vif (mac aa:00:00:2a:f6:2a)))))) ***request> begin xfr_err> ['xfr.err', '0'] xfr_err> <type 'str'> 0 Xfrd>connectionLost> [Failure instance: Traceback: twisted.internet.error.ConnectionDone, Connection was closed cleanly. ] XfrdSaveInfo>connectionLost> [Failure instance: Traceback: twisted.internet.error.ConnectionDone, Connection was closed cleanly. ] XfrdInfo>connectionLost> [Failure instance: Traceback: twisted.internet.error.ConnectionDone, Connection was closed cleanly. ] Error> save failed Error> calling errback ***cbremove> [Failure instance: Traceback: xen.xend.XendError.XendError, save failed ] ***_delete_session> 1 clientConnectionLost> connector= <twisted.internet.tcp.Connector instance at 0xb76c34ec> reason= [Failure instance: Traceback: twisted.internet.error.ConnectionDone, Connection was closed cleanly. ] [2005-01-21 00:13:24 xend] INFO (SrvDaemon:607) Xend Daemon started [2005-01-21 00:13:24 xend] INFO (XendRoot:91) EVENT> xend.start 0 [2005-01-21 00:13:38 xend] DEBUG (XendDomainInfo:720) init_domain> Created domain=2 name=virt-1 memory=128 [2005-01-21 00:13:38 xend] INFO (console:92) Created console id=13 domain=2 port=9602 [2005-01-21 00:13:38 xend] DEBUG (XendDomainInfo:1130) Creating vbd dom=2 uname=file:/xen/virt-1 [2005-01-21 00:13:38 xend] DEBUG (blkif:146) Connecting blkif <BlkifBackendInterface 2 0> [2005-01-21 00:13:38 xend] DEBUG (XendDomainInfo:1130) Creating vbd dom=2 uname=file:/xen/virt-1.swap [2005-01-21 00:13:38 xend] DEBUG (blkif:146) Connecting blkif <BlkifBackendInterface 2 0> [2005-01-21 00:13:38 xend] DEBUG (XendDomainInfo:1107) Creating vif dom=2 vif=0 mac=aa:00:00:2a:f6:2a [2005-01-21 00:13:38 xend] INFO (XendRoot:91) EVENT> xend.console.create [13, 2, 9602] [2005-01-21 00:13:38 xend] INFO (XendRoot:91) EVENT> xend.domain.create ['virt-1', '2'] [2005-01-21 00:13:38 xend] INFO (XendRoot:91) EVENT> xend.domain.unpause ['virt-1', '2'] [2005-01-21 00:13:42 xend] DEBUG (blkif:192) Connecting blkif to event channel <BlkifBackendInterface 2 0> ports=16:3 [2005-01-21 00:14:23 xend] INFO (XendMigrate:370) Save BEGIN: ['save', ['id', '1'], ['state', 'begin'], ['domain', '2'], ['file', '/xen/virt-1.save']] [2005-01-21 00:14:23 xend] INFO (XendRoot:91) EVENT> xend.domain.save ['virt-1', '2', 'begin', ['save', ['id', '1'], ['state', 'begin'], ['domain', '2'], ['file', '/xen/virt-1.save']]] [2005-01-21 00:14:23 xend] INFO (XendMigrate:390) Save ERROR: ['save', ['id', '1'], ['state', 'error'], ['domain', '2'], ['file', '/xen/virt-1.save']] [2005-01-21 00:14:23 xend] INFO (XendRoot:91) EVENT> xend.domain.save ['virt-1', '2', 'error', ['save', ['id', '1'], ['state', 'error'], ['domain', '2'], ['file', '/xen/virt-1.save']]]
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |