[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Must have been asked before, but I can't find the solution
I'm attempting to migrate from vmware to xen, however I need to be able to run more than one bridge. Think of it this way: xen0 xenU-1 xenU-2 xenU-3 ------------------------------------------------------------------------ Inside_bridge_1: eth0 vm1_eth0 vm2_eth0 virtual_switch_2: vm1_eth1 vm2_eth1 vm3_eth1 Outside_bridge_3: eth1 vm2_eth2 vm3_eth0 Now, I can modify the existing network/vif-bridge or build replacement scripts/config files that will get this done, with the exception of the MAC. If you configure (xen-2.0.3-src.tar.bz2) a domain for more than 1 nic, the xenU domains use the same MAC for all interfaces. EX. devel root # ip link 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether aa:00:00:0d:d0:26 brd ff:ff:ff:ff:ff:ff 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000 link/ether aa:00:00:0d:d0:26 brd ff:ff:ff:ff:ff:ff 4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000 link/ether aa:00:00:0d:d0:26 brd ff:ff:ff:ff:ff:ff 5: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000 link/ether aa:00:00:0d:d0:26 brd ff:ff:ff:ff:ff:ff How/where do I change this? (not in the config file as far as I can tell) Thanks, B. ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |