[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Re: Booting Xen/ia64
I tried to build again, freshly from ftp, and this is how far it booted: Loading.: Scientific Linux CERN Starting: Scientific Linux CERN ELILO boot: Loading xen...Loading Linux... ..done Loading initrd xenlinux...done Linux version 2.6.9 (root@oplapro05) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-42)) #1 SMP Mon Jan 17 10:03:22 EFI v1.00 by Xen/ia64: SALsystab=0x8000178 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000 warning: unable to switch EFI into virtual mode (status=9223372036854775811) No I/O port range found in EFI memory map, falling back to AR.KR0 I/O port base = 0x0 SAL 0.1: Xen/ia64 Xen/ia64 version 0.0 get_max_cacheline_size: ia64_pal_cache_summary() failed (status=-1) PAL_VM_PAGE_SIZE failed with status=-1;defaulting to architected purge page-sizes. cpu_init: PAL VM summary failed, assuming 18 RID bits ACPI: Local APIC address c0000000fee00000 GSI 36 (level, low) -> CPU 0 (0x0000) vector 48 2 CPUs available, 2 CPUs total PCDPt 0xe00000003fb2c000 GSI 82 (level, low) -> CPU 0 (0x0000) vector 49 PCDP: serial console at MMIO 0xf8030000 (ttyS0, options 9 Built 1 zonelists Kernel command line: BOOT_IMAGE=scsi0:EFI\redhat\xen nomca console=ttyS0 console=tty0 root=/dev/sda2 ro P table entries: 1024 (order: 10, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 5, 524288 bytes) Inode-cache hash table entries: 32768 (order: 4, 262144 bytes) Memory: 508288k/523264k available (6786k code, 14592rved, 3278k data, 208k init) McKinley Errata 9 workaround not needed; disabling it Mount-cache hash table entries: 1024 (order 0, 16384 bytes) Boot processor id 0x0/0x0 task migration cache decay timeout: 10 msecs. ************* SYSTEM ALERT ************** SYSTEM NAME: moplapro05 17 Jan 2005 10:21:59 Alert Level 3: Warning Keyword: BOOT_SLAVE_NO_FINAL_WAKEUP_VECTOR Slave wakeup before vector registered Logged by: System Firmware 1 Data: Implementation dependent data field 0x7680005B01E01F50 0000000000000001 A: ack read of this entry - X: Disable all future alert messages Anything else skip redisplay the log entry ->Choice:Timeout! ***************************************** Your *.good binaries still boot fine, and we're using the same gcc version: >gcc --version gcc (GCC) 3.2.3 20030502 (Red Hat Linux 3.2.3-42) Håvard On Fri, Jan 14, 2005 at 11:21:27AM -0800, Magenheimer, Dan (HP Labs Fort Collins) wrote: > Just wanted to let you know I am still working on your problem. > (I was tied up with other commitments most of yesterday.) > > Just to verify, I rebuilt everything from the ftp site to ensure > I had the same xen/xenlinux bits as you and was able to successfully > boot and run. I'm wondering if we might be seeing compiler > or hardware differences? Now that you have serial port output, > could you rebuild from the ftp bits and let me know if you > are still having problems. And if you still have problems, > could you send me the serial output (as you did below). > > Regarding the output below, after studying it a bit, I realize > it is a result of an unprivified xenlinux. > > > -----Original Message----- > > From: Håvard Bjerke [mailto:havarbj@xxxxxxxxxxx] > > Sent: Wednesday, January 12, 2005 9:53 AM > > To: Magenheimer, Dan (HP Labs Fort Collins) > > Cc: xen-devel@xxxxxxxxxxxxxxxxxxxxx > > Subject: Re: Booting Xen/ia64 > > > > On Wed, Jan 12, 2005 at 07:30:49AM -0600, > > dan.magenheimer@xxxxxx wrote: > > > Did you try your binaries with the changed serial? If so, > > > how far did it get? (no output or did a few messages get printed) > > > > This is how far it gets when using my own built xen and your > > xenlinux.good binary: > > > > (XEN) domain mem: type=40631872, attr=0x10000008000761, > > range=[0xfffc00000a6bfc30-0xfffc0000126bfc30) (128MB) > > (XEN) About to call init_trace_bufs() > > (XEN) get_time_delta: called, not implemented > > (XEN) About to call startup_cpu_idle_loop() > > (XEN) get_time_delta: called, not implemented > > (XEN) update_dom_time: called, not implemented, skipping > > (XEN) current=fffc0000026b8000,shared_info=fffc00003f59c000 > > (XEN) next=fffc000004074000,shared_info=0 > > (XEN) schedule_tail: change to rr7 not yet implemented > > (XEN) vcpu_get_lid: WARNING: Getting cr.lid always returns zero > > (XEN) vcpu_get_lid: WARNING: Getting cr.lid always returns zero > > (XEN) **** vcpu_set_itv(65536): vitm=0, setting to 0 > > (XEN) vcpu_get_lid: WARNING: Getting cr.lid always returns zero > > (XEN) vcpu_get_lid: WARNING: Getting cr.lid always returns zero > > (XEN) vcpu_get_lid: WARNING: Getting cr.lid always returns zero > > (XEN) *** CALLED SAL_SET_VECTORS. IGNORED... > > (XEN) vcpu_enable_timer(1000000): interval set to 69882928 cycles > > Linux version 2.6.9 (djm@sportsman) (gcc version 3.2.3 > > 20030502 (Red Hat Linux 3.2.3-34)) #1 SMP Tue Dec 7 21:25:04 MST 2004 > > EFI v1.00 by Xen/ia64: SALsystab=0x8000178 ACPI > > 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000 > > warning: unable to switch EFI into virtual mode > > (status=9223372036854775811) > > No I/O port range found in EFI memory map, falling back to AR.KR0 > > I/O port base = 0x3fffffc000000 > > SAL 0.1: Xen/ia64 Xen/ia64 version 0.0 > > get_max_cacheline_size: ia64_pal_cache_summary() failed (status=-1) > > PAL_VM_PAGE_SIZE failed with status=-1;defaulting to > > architected purge page-sizes. > > cpu_init: PAL VM summary failed, assuming 18 RID bits > > ACPI: Local APIC address c0000000fee00000 > > GSI 36 (level, low) -> CPU 0 (0x0000) vector 48 > > 2 CPUs available, 2 CPUs total > > PCDP: v0 at 0xe00000003fb2c000 > > GSI 34 (edge, high) -> CPU 0 (0x0000) vector 49 > > PCDP: serial console at MMIO 0xff5e0000 (ttyS0, options 9600n8) > > Built 1 zonelists > > Kernel command line: BOOT_IMAGE=scsi0:EFI\redhat\xen nomca > > console=ttyS0 console=tty0 root=/dev/sda2 ro > > PID hash table entries: 2048 (order: 11, 65536 bytes) > > Console: colour VGA+ 80x25 > > (XEN) Delivering first extint to domain: > > ifa=0000000000000000, isr=0000020000000000, > > itir=0000000000000000, iip=a0000001007c0cf0 > > (XEN) psr.ic off, delivering > > fault=5300,iip=a000000100003040,isr=00000a0400000000,PSCB.iip= > > a0000001007c0cf0 > > > > -- Håvard K. F. Bjerke http://www.idi.ntnu.no/~havarbj/ ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |