[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] network advice needed



Newbie Xen network advice needed.  I'd like to do the following:  Have domain0 
masqerade all other domains (on that system) through the physical ethernet 
adapter in domain0.  I'd like all of the other domains to have an IP 
addresses in 192.168.0.0/24.  Domain0 will also dhcp serve IP's to the other 
domains.  I want to do this, so I can dynamically create as many domains as I 
need without worrying about IP address assignment headaches.

So, this is what I think I need:

doamin0: has my physical network adapter with my static IP address, and an 
ethernet bridge which has IP address of 192.168.0.1.  

domain[1-N]: has vifN.0, with IP address in subnet 192.168.0.0/24

Some iptables setup to MASQ from dev br0 and out eth0.

The main thing I see that needs chaning is simply not move domain0's eth0 IP 
address to the bridge, but assign it 192.168.0.1.  Is that correct?

Thanks,

Andrew Theurer



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.