[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] RE: Booting Xen/ia64



> This is on both serial and video. And yes, "root=/dev/sda2" 
> works with standard Linux.
>
> It's an rx2600.

Hmmm... mysterious.  This is the same box I am using and the
same bits.  Perhaps a baud rate problem on the serial port?
The hack I mentioned assumes 115200.  (This can be configured
via the EFI shell.)  When I am running Linux, I use
"console=ttyS0,115200" but I don't know if specifying a
different baud rate for Xen/ia64 will work (yet).

Otherwise could be different firmware versions, but one wouldn't
expect that to cause this kind of a problem.

When you boot real Linux with the same console= are you getting
boot output on the VGA display?

Dan



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.