[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] vif-bridge is driving me nuts
On Wed, 2005-01-05 at 00:08 -0500, Matt Ayres wrote: > > > > In response to my own post, I noticed the parameters for 'vif' in the > config file match up to those for vif-bridge... except for the 'ip' > parameter. Would something like this in the domain configuration file > make sense? > > vif = [ 'ip="192.168.1.80/32"' ] > > or to better follow the example, even this: > > vif = [ 'mac=aa:00:00:00:00:11, bridge=xen-br0, ip="192.168.1.80/32"' ] > > Of course, no scripts see ip as a valid argument so it doesn't work > now... it returns something like "Error: Invalid vif specifier: > ip=192.168.1.80/32". Interestingly enough i've tried modifying > create.py (in the build tree so it builds create.pyc) to include 'ip' as > valid, same error. Then I completely commented the 2 lines of code that > check and return the error and it STILL does it so i'm obviously missing > something, I guess I just need either a pointer from someone or to bury > myself in the code for a little bit more. > In yet another response to my own post, it looks like it's looking to pass the variable 'ipaddr' to the vif-script (aka. vif-bridge) script as the last argument. Does this sound correct? Of course it doesn't work, but the code looks like this should be what should happen. From Vifctl.py: def vifctl(op, vif=None, script=None, domain=None, mac=None, bridge=None, ipaddr=[]): """Call a vif control script. Xend calls this when bringing vifs up or down. @param op: vif operation (up, down) @param vif: vif name @param script: name of control script @param domain: name of domain the vif is on @param mac: vif MAC address @param bridge: bridge to add the vif to @param ipaddr: list of ipaddrs the vif may use ... if ipaddr: ips = ' '.join(ipaddr) args.append("ip='%s'" % ips) vifctl is called from server/netif.py and it also retrieves the ipaddr information from there. Unfortunately, it doesn't work... even though ipaddr is defined in the domain config file it's still not passing the argument to vif-bridge. I have to admit I know absolutely no Python and very little OO design so perhaps i'm missing something... it looks like it should just work though. Can whoever wrote this part of Xen perhaps provide some insight? Here is an example configuration file I am trying to use: # -*- mode: python; -*- kernel = "/xen/servers/vs1/kernel" memory = 64 name = "vs1" disk = [ 'file:/xen/servers/vs1/rootfs,sda1,w', 'file:/xen/servers/vs1/swapfs,sda2,w' ] netmask="255.255.255.0" gateway="192.168.1.1" hostname="www.vs1.net" ipaddr="192.168.1.80" ip="192.168.1.80" console=500 root = "/dev/sda1 ro" extra = "4" restart = 'onreboot' antispoof is set to yes in xend-config.sxp. I'll post more if I get this working before I hear back from someone else, but at the moment I think i've exhausted my resources. -- ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |