[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] problems with xen-br0



Ronald G. Minnich wrote:

still can't get packets to route correctly if xen sets up xen-br0.
Here are interfaces after xend start

eth0 Link encap:Ethernet HWaddr 00:D0:59:CD:55:9B inet addr:10.128.207.119 Bcast:10.128.255.255 Mask:255.255.0.0
[snip]

xen-br0 Link encap:Ethernet HWaddr 00:D0:59:CD:55:9B inet addr:10.128.207.119 Bcast:10.128.255.255
[snip]

but they're not making it through to anywhere else. So bridging does not seem to be happening. If I do a showmacs I can even see the dom1 mac in there. Now, if I do this: ifconfig eth0 172.16.233.1
ifconfig xen-br0 172.16.233.1

everything is fine -- no shock, the plan 9 domain has ip 172.16.233.201. So, if xen-br0 is actually bridging, I can't see it happening.
What IS your network address for eth0 and xen-br0 anyway?
172.16.233.0 or 10.128.207.0?
Generally speaking, devices in a bridge should be on the same network.

Regards,

Fajar


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.