RE: [Xen-devel] eth interrupts unavailable under xen

["Ian Pratt" <m+Ian.Pratt@xxxxxxxxxxxx>]

        Has the motherboard got an IOAPIC?
                  

        Concluding from the following XEN output I'd say that it does:
        
        (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
        ...
        (XEN) ENABLING IO-APIC IRQs
        (XEN) Setting 2 in the phys_id_present_map
        (XEN) ...changing IO-APIC physical APIC ID to 2 ... ok.
        (XEN) init IO_APIC IRQs
        (XEN) ..TIMER: vector=0x41 pin1=2 pin2=0 
         
You might want to try adding 'ignorebiostables' on the Xen command line.

Ian



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel