Re: [Xen-devel] xen and pci

[Adam Sulmicki <adam@xxxxxxxxxxxx>]

On Sat, 30 Oct 2004, Keir Fraser wrote:

> -        if ( dev->hdr_type != PCI_HEADER_TYPE_NORMAL )
> +        if ( (dev->hdr_type != PCI_HEADER_TYPE_NORMAL) &&
> +             (dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) )

Yup! This definitely helped. Now the Yenta Driver finds the bridge.

However, it still has trouble initalizing the card xircom_cb.

Not quite sure what it is wrong, just no errors at all. The only
signifcant difference I can see in 'dmesg' is that :

-cs: IO port probe 0x0c00-0x0cff: clean.
+cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
-cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7
+cs: IO port probe 0x03e0-0x04ff: excluding 0x3f8-0x3ff 0x4d0-0x4d7
 cs: IO port probe 0x0100-0x03af: clean.
 cs: IO port probe 0x0a00-0x0aff: clean.

attached:
        xircom-2.6.8.1-bproc
        xircom-2.6.8.1-xen0

Adam

Attachment: xircom-2.6.8.1-bproc
Description: Text document

Attachment: xircom-2.6.8.1-xen0
Description: Text document