[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Virtual ethernet driver.
On Fri, 26 Nov 2004, Ian Pratt wrote: Perhaps start xend with 'xend trace_start' and then see if xend.log can shed any light. Xend work fine i thing i have broken kernel or system. While the hang is going on, do you see the new vif if you do an 'ifconfig' in domain 0? Has it been added to the bridge? 5: xen-br0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue link/ether 00:50:da:1c:b1:74 brd ff:ff:ff:ff:ff:ff inet 192.168.244.13/32 scope global xen-br0 inet6 fe80::200:ff:fe00:0/64 scope link 6: vif1.0: <BROADCAST,MULTICAST,PROMISC> mtu 1500 qdisc noop link/ether aa:00:01:7d:49:8a brd ff:ff:ff:ff:ff:ff anubis ~ # brctl show bridge name bridge id STP enabled interfaces xen-br0 8000.0050da1cb174 no eth0 vif1.0 vif1.0 added to system and to bridge, but it dont up. Pozdrawiam. Lukasz Grzelak Sys-Net Admin ------------------------------------------------------ iTk - info@xxxxxx - http://www.itk.pl - +48 91 8137012 ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users.Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |