[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] brctl issues...
Ok, lets see if I can describe this well enough... when I run brctl addif xen-bro vif1.0 it fails with the following... vhost1:~# brctl addif xen-br0 vif56.0 can't add vif56.0 to bridge xen-br0: Cannot assign requested address ifconfig dumps... vhost1:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:50:8D:4F:33:D7 inet6 addr: fe80::250:8dff:fe4f:33d7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2088696 errors:0 dropped:848 overruns:0 frame:0 TX packets:2179062 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1703264248 (1.5 GiB) TX bytes:1955226623 (1.8 GiB) Interrupt:23 Base address:0xe400 eth1 Link encap:Ethernet HWaddr 00:60:97:B6:7D:4A inet6 addr: fe80::260:97ff:feb6:7d4a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5728 errors:0 dropped:0 overruns:0 frame:0 TX packets:2538 errors:0 dropped:0 overruns:0 carrier:0 collisions:3 txqueuelen:1000 RX bytes:1721585 (1.6 MiB) TX bytes:653564 (638.2 KiB) Interrupt:17 Base address:0xd000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:73036 errors:0 dropped:0 overruns:0 frame:0 TX packets:73036 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:59921375 (57.1 MiB) TX bytes:59921375 (57.1 MiB) vif56.0 Link encap:Ethernet HWaddr 01:00:10:00:01:92 inet6 addr: fe80::300:10ff:fe00:192/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:3 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2360 (2.3 KiB) TX bytes:140 (140.0 b) vif56.1 Link encap:Ethernet HWaddr 01:00:01:00:01:92 inet6 addr: fe80::300:1ff:fe00:192/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2360 (2.3 KiB) TX bytes:0 (0.0 b) xen-br0 Link encap:Ethernet HWaddr 00:50:8D:4F:33:D7 inet addr:10.11.0.32 Bcast:10.11.255.255 Mask:255.255.0.0 inet6 addr: fe80::250:8dff:fe4f:33d7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:253950 errors:0 dropped:0 overruns:0 frame:0 TX packets:307125 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:41502095 (39.5 MiB) TX bytes:105782488 (100.8 MiB) xen-br1 Link encap:Ethernet HWaddr 00:60:97:B6:7D:4A inet addr:10.0.1.32 Bcast:10.255.255.255 Mask:255.255.254.0 inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4206 errors:0 dropped:0 overruns:0 frame:0 TX packets:1613 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:607414 (593.1 KiB) TX bytes:144808 (141.4 KiB) The funny thing is, a little bit ago it was working just fine. Stock network script wrappered with the following to setup the bridges... I've rebooted, restored the original scripts, reinstalled the kernel that was working, reinstalled xen from the same debs... Any ideas why brctl would suddenly be unable to add the vifs to the bridges? *boggled* ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |