Xen project Mailing List

[Xen-devel] Re: scheduler panic

To: Keir Fraser <Keir.Fraser@xxxxxxxxxxxx>

From: Kip Macy <kmacy@xxxxxxxxxxxxxxx>

Date: Mon, 31 May 2004 14:46:35 -0700 (PDT)

Cc: xen-devel@xxxxxxxxxxxxxxxxxxxxx, Ian.Pratt@xxxxxxxxxxxx

Delivery-date: Mon, 31 May 2004 22:47:56 +0100

List-id: List for Xen developers <xen-devel.lists.sourceforge.net>

Mmmm - nope. It is getting further, but it isn't making it up. I've pasted from the point it made it to prior to your fix. My previous offer still stands. keyboard: Timeout - AT keyboard not present?(ed) keyboard: Timeout - AT keyboard not present?(f4) Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k1 Copyright (c) 1999-2004 Intel Corporation. tg3.c:v2.9 (March 8, 2004) PCI: Obtained IRQ 27 for device 02:03.0 eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:66MHz:32-bit) 10/100/1000BaseT Ethernet 00:50:45:01:03:3a PCI: Obtained IRQ 27 for device 02:04.0 eth1: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:66MHz:32-bit) 10/100/1000BaseT Ethernet 00:50:45:01:03:3b Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: 00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:DMA, hdd:pio hda: C/H/S=0/0/0 from BIOS ignored (XEN) (file=irq.c, line=1017) Cannot bind IRQ 12 to guest. In use by 'PS/2 Mouse'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 12 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 4 to guest. In use by 'serial'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 4 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 2 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 1 to guest. In use by 'keyboard'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 1 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 12 to guest. In use by 'PS/2 Mouse'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 12 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 4 to guest. In use by 'serial'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 4 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 2 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 1 to guest. In use by 'keyboard'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 1 (error=-16) hda: ST340014A, ATA DISK drive (XEN) (file=irq.c, line=1017) Cannot bind IRQ 12 to guest. In use by 'PS/2 Mouse'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 12 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 4 to guest. In use by 'serial'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 4 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 2 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 1 to guest. In use by 'keyboard'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 1 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 12 to guest. In use by 'PS/2 Mouse'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 12 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 4 to guest. In use by 'serial'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 4 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 2 (error=-16) (XEN) (file=irq.c, line=1017) Cannot bind IRQ 1 to guest. In use by 'keyboard'. (XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 1 (error=-16) hdc: SR244W, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) hdc: attached ide-cdrom driver. hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 hda3 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) ip_conntrack version 2.1 (2048 buckets, 16384 max) - 288 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 root_device_name = hda3 kjournald starting. Commit interval 5 seconds (XEN) Assertion 'entry->next->prev == entry' failed, line 92, file /x/eng/raidant/bk/xeno-unstable-latest/xen/include/xen/list.hCPU: 0 (XEN) EIP: 0808:[<fc51564a>] (XEN) EFLAGS: 00211046 (XEN) eax: 00002fcc ebx: fc590d84 ecx: 0000002f edx: 00000000 (XEN) esi: fc590d40 edi: 00000000 ebp: 02eadc06 esp: fc503ed8 (XEN) ds: 0810 es: 0810 fs: 0810 gs: 0810 ss: 0810 (XEN) Stack trace from ESP=fc503ed8: (XEN) fc530c80 fc53380b 0000005c fc530ee0 d632908d 00000003 d63290f6 00000003 (XEN) 00000000 00000000 fc590d40 fc590d40 fc596000 fc574754 00687abe 00000000 (XEN) d632908d 00000003 00000000 d6328ed0 00000003 00000000 fc590d40 [fc515ff8] (XEN) fc503f68 d6328ed0 00000003 c00b67df d9e94efe 00000003 c12cf8c0 fc575120 (XEN) 00000000 00000003 00000003 00000000 d6328be6 00000003 00000001 fc596000 (XEN) fc574754 00000000 00201292 fc590d40 00000000 00000008 c0202000 [fc515ec5] (XEN) fc590d40 c0203f40 c1366000 fc590d40 fc590d40 fc590d40 c0202000 [fc521ce5] (XEN) 00000001 d34de780 d2b55100 c0202000 00000008 c0202000 00000008 00000821 (XEN) 00000821 00000821 00000821 00000008 c00b3178 00000819 00201246 c0203fd8 (XEN) 00000821 fc590d40 (XEN) Call Trace from ESP=fc503ed8: [<fc515ff8>] [<fc515ec5>] [<fc521ce5>] On Mon, 31 May 2004, Keir Fraser wrote: > > Hopefully fixed now. > > -- Keir > > > > FYI: > > I reverted to 1.915 on the off-chance that the bug is a result of recent > > scheduler changes not playing well on SMP. The machine is up and running > > again. > > > > > > -Kip > > > > ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.