[xen staging-4.20] char/ns16550: bound execution time of ns16550_interrupt()

[patchbot@xxxxxxx]

commit af452ffebb9ef50f068f4c3128a05290665b4fdf
Author:     Roger Pau Monné <roger.pau@xxxxxxxxxx>
AuthorDate: Tue Jun 30 15:02:14 2026 +0200
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Tue Jun 30 15:02:14 2026 +0200

    char/ns16550: bound execution time of ns16550_interrupt()
    
    The current logic in ns16550_interrupt() will loop until the device sets
    the NOINT in IIR.  At least on the Lenovo ThinkSystem SR630 V4 the flow
    control of the serial-over-lan emulated UART seems to be broken, as it
    doesn't set the NOINT bit consistently.  The Transmitter Holding Register
    Empty in LSR also seems to not be properly signaled, as even with it set
    writes to the transmit register take ~6ms.  This leads to the watchdog
    triggering very easily on such system.
    
    Introduce an upper bound on the execution time of ns16550_interrupt(), this
    is currently set as 4x the polling interval, which is calculated as the
    time to fill RX FIFO and/or empty TX FIFO.  The current maximum timeout is
    either 5ms or the polling interval, whatever is higher.  Once the timeout
    triggers the interrupt is disabled and the uart is switched to polling
    mode.
    
    Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
    master commit: d1b72a9aeda57e858b345d46874cd3d07f99be5c
    master date: 2026-06-29 17:14:47 +0200
---
 xen/common/irq.c           | 12 ++++++++++++
 xen/drivers/char/ns16550.c | 30 +++++++++++++++++++++++++++++-
 xen/include/xen/irq.h      |  1 +
 3 files changed, 42 insertions(+), 1 deletion(-)

diff --git a/xen/common/irq.c b/xen/common/irq.c
index 29729349a6..b76bbb6143 100644
--- a/xen/common/irq.c
+++ b/xen/common/irq.c
@@ -54,3 +54,15 @@ unsigned int cf_check irq_startup_none(struct irq_desc *desc)
 {
     return 0;
 }
+
+void disable_irq(unsigned int irq)
+{
+    struct irq_desc *desc = irq_to_desc(irq);
+    unsigned long flags;
+
+    spin_lock_irqsave(&desc->lock, flags);
+    if ( desc->handler->disable )
+        desc->handler->disable(desc);
+    desc->status |= IRQ_DISABLED;
+    spin_unlock_irqrestore(&desc->lock, flags);
+}
diff --git a/xen/drivers/char/ns16550.c b/xen/drivers/char/ns16550.c
index 6089558aae..efc0fabba7 100644
--- a/xen/drivers/char/ns16550.c
+++ b/xen/drivers/char/ns16550.c
@@ -60,6 +60,7 @@ static struct ns16550 {
     struct timer resume_timer;
     unsigned int timeout_ms;
     bool intr_works;
+    bool force_polling;
     bool dw_usr_bsy;
 #ifdef NS16550_PCI
     /* PCI card parameters. */
@@ -180,12 +181,38 @@ static void cf_check ns16550_interrupt(int irq, void 
*dev_id)
 {
     struct serial_port *port = dev_id;
     struct ns16550 *uart = port->uart;
+    /*
+     * Set quite arbitrarily as 4x the time to drain the TX or fill RX FIFOs,
+     * set the upper bound as 5ms or the timeout_ms value, whatever is higher.
+     */
+    const unsigned int delta = min(uart->timeout_ms * 4,
+                                   max(5u, uart->timeout_ms));
+    const s_time_t timeout = NOW() + MILLISECS(delta);
 
+    ASSERT(!uart->force_polling);
     uart->intr_works = 1;
 
     while ( !(ns_read_reg(uart, UART_IIR) & UART_IIR_NOINT) )
     {
         u8 lsr = ns_read_reg(uart, UART_LSR);
+        s_time_t now = NOW();
+
+        /* Break out of the loop if spending too much time. */
+        if ( now > timeout )
+        {
+            /* Disable the interrupt source - it's never shared. */
+            disable_irq(irq);
+
+            /* Disable interrupt generation on the device and arm the timer. */
+            uart->force_polling = true;
+            ns_write_reg(uart, UART_IER, 0);
+            set_timer(&uart->timer, now + MILLISECS(uart->timeout_ms));
+            printk(XENLOG_WARNING
+                   "uart interrupt taking more than %ums, switched to 
polling\n",
+                   delta);
+
+            return;
+        }
 
         if ( (lsr & uart->lsr_mask) == uart->lsr_mask )
             serial_tx_interrupt(port);
@@ -213,7 +240,7 @@ static void cf_check __ns16550_poll(const struct 
cpu_user_regs *regs)
     struct ns16550 *uart = port->uart;
     const struct cpu_user_regs *old_regs;
 
-    if ( uart->intr_works )
+    if ( uart->intr_works && !uart->force_polling )
         return; /* Interrupts work - no more polling */
 
     /* Mimic interrupt context. */
@@ -312,6 +339,7 @@ static void ns16550_setup_preirq(struct ns16550 *uart)
     unsigned int  divisor;
 
     uart->intr_works = 0;
+    uart->force_polling = false;
 
     pci_serial_early_init(uart);
 
diff --git a/xen/include/xen/irq.h b/xen/include/xen/irq.h
index 95034c0d6b..30d58e372b 100644
--- a/xen/include/xen/irq.h
+++ b/xen/include/xen/irq.h
@@ -121,6 +121,7 @@ extern void release_irq(unsigned int irq, const void 
*dev_id);
 extern int request_irq(unsigned int irq, unsigned int irqflags,
                void (*handler)(int irq, void *dev_id),
                const char *devname, void *dev_id);
+void disable_irq(unsigned int irq);
 
 extern const hw_irq_controller no_irq_type;
 void cf_check no_action(int cpl, void *dev_id);
--
generated by git-patchbot for /home/xen/git/xen.git#staging-4.20