|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen stable-4.20] x86/idle: Remove MFENCEs for CLFLUSH_MONITOR
commit 8869f66d296138afd738dda788bd5c4508c11844
Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
AuthorDate: Tue Apr 1 15:55:29 2025 +0100
Commit: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
CommitDate: Mon Jul 7 22:52:21 2025 +0100
x86/idle: Remove MFENCEs for CLFLUSH_MONITOR
Commit 48d32458bcd4 ("x86, idle: add barriers to CLFLUSH workaround") was
inherited from Linux and added MFENCEs around the AAI65 errata fix.
The SDM now states:
Executions of the CLFLUSH instruction are ordered with respect to each
other and with respect to writes, locked read-modify-write instructions,
and fence instructions[1].
with footnote 1 reading:
Earlier versions of this manual specified that executions of the CLFLUSH
instruction were ordered only by the MFENCE instruction. All processors
implementing the CLFLUSH instruction also order it relative to the other
operations enumerated above.
I.e. the MFENCEs came about because of an incorrect statement in the SDM.
The Spec Update (no longer available on Intel's website) simply says "issue
a
CLFLUSH", with no mention of MFENCEs.
As this erratum is specific to Intel, it's fine to remove the the MFENCEs;
AMD
CPUs of a similar vintage do sport otherwise-unordered CLFLUSHs.
Move the feature bit into the BUG range (rather than FEATURE), and move the
workaround into monitor() itself.
The erratum check itself must use setup_force_cpu_cap(). It needs
activating
if any CPU needs it, not if all of them need it.
Fixes: 48d32458bcd4 ("x86, idle: add barriers to CLFLUSH workaround")
Fixes: 96d1b237ae9b ("x86/Intel: work around Xeon 7400 series erratum
AAI65")
Link:
https://web.archive.org/web/20090219054841/http://download.intel.com/design/xeon/specupdt/32033601.pdf
Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
(cherry picked from commit f77ef3443542a2c2bbd59ee66178287d4fa5b43f)
---
xen/arch/x86/acpi/cpu_idle.c | 22 +++-------------------
xen/arch/x86/cpu/intel.c | 3 ++-
xen/arch/x86/include/asm/cpufeatures.h | 3 ++-
3 files changed, 7 insertions(+), 21 deletions(-)
diff --git a/xen/arch/x86/acpi/cpu_idle.c b/xen/arch/x86/acpi/cpu_idle.c
index 40af42a18f..e9493f7f57 100644
--- a/xen/arch/x86/acpi/cpu_idle.c
+++ b/xen/arch/x86/acpi/cpu_idle.c
@@ -63,6 +63,9 @@
static always_inline void monitor(
const void *addr, unsigned int ecx, unsigned int edx)
{
+ alternative_input("", "clflush (%[addr])", X86_BUG_CLFLUSH_MONITOR,
+ [addr] "a" (addr));
+
asm volatile ( "monitor"
:: "a" (addr), "c" (ecx), "d" (edx) );
}
@@ -476,13 +479,6 @@ void mwait_idle_with_hints(unsigned int eax, unsigned int
ecx)
s_time_t expires = per_cpu(timer_deadline, cpu);
const void *monitor_addr = &mwait_wakeup(cpu);
- if ( boot_cpu_has(X86_FEATURE_CLFLUSH_MONITOR) )
- {
- mb();
- clflush(monitor_addr);
- mb();
- }
-
monitor(monitor_addr, 0, 0);
smp_mb();
@@ -917,19 +913,7 @@ void cf_check acpi_dead_idle(void)
while ( 1 )
{
- /*
- * 1. The CLFLUSH is a workaround for erratum AAI65 for
- * the Xeon 7400 series.
- * 2. The WBINVD is insufficient due to the spurious-wakeup
- * case where we return around the loop.
- * 3. Unlike wbinvd, clflush is a light weight but not serializing
- * instruction, hence memory fence is necessary to make sure all
- * load/store visible before flush cache line.
- */
- mb();
- clflush(mwait_ptr);
monitor(mwait_ptr, 0, 0);
- mb();
mwait(cx->address, 0);
}
}
diff --git a/xen/arch/x86/cpu/intel.c b/xen/arch/x86/cpu/intel.c
index 7eaa20ece1..9f8115008b 100644
--- a/xen/arch/x86/cpu/intel.c
+++ b/xen/arch/x86/cpu/intel.c
@@ -446,6 +446,7 @@ static void __init probe_mwait_errata(void)
*
* Xeon 7400 erratum AAI65 (and further newer Xeons)
* MONITOR/MWAIT may have excessive false wakeups
+ *
https://web.archive.org/web/20090219054841/http://download.intel.com/design/xeon/specupdt/32033601.pdf
*/
static void Intel_errata_workarounds(struct cpuinfo_x86 *c)
{
@@ -463,7 +464,7 @@ static void Intel_errata_workarounds(struct cpuinfo_x86 *c)
if (c->x86 == 6 && cpu_has_clflush &&
(c->x86_model == 29 || c->x86_model == 46 || c->x86_model == 47))
- __set_bit(X86_FEATURE_CLFLUSH_MONITOR, c->x86_capability);
+ setup_force_cpu_cap(X86_BUG_CLFLUSH_MONITOR);
probe_c3_errata(c);
if (system_state < SYS_STATE_smp_boot)
diff --git a/xen/arch/x86/include/asm/cpufeatures.h
b/xen/arch/x86/include/asm/cpufeatures.h
index 9e3ed21c02..84c93292c8 100644
--- a/xen/arch/x86/include/asm/cpufeatures.h
+++ b/xen/arch/x86/include/asm/cpufeatures.h
@@ -19,7 +19,7 @@ XEN_CPUFEATURE(ARCH_PERFMON, X86_SYNTH( 3)) /* Intel
Architectural PerfMon
XEN_CPUFEATURE(TSC_RELIABLE, X86_SYNTH( 4)) /* TSC is known to be
reliable */
XEN_CPUFEATURE(XTOPOLOGY, X86_SYNTH( 5)) /* cpu topology enum
extensions */
XEN_CPUFEATURE(CPUID_FAULTING, X86_SYNTH( 6)) /* cpuid faulting */
-XEN_CPUFEATURE(CLFLUSH_MONITOR, X86_SYNTH( 7)) /* clflush reqd with monitor
*/
+/* Bit 7 unused */
XEN_CPUFEATURE(APERFMPERF, X86_SYNTH( 8)) /* APERFMPERF */
XEN_CPUFEATURE(MFENCE_RDTSC, X86_SYNTH( 9)) /* MFENCE synchronizes RDTSC
*/
XEN_CPUFEATURE(XEN_SMEP, X86_SYNTH(10)) /* SMEP gets used by Xen
itself */
@@ -52,6 +52,7 @@ XEN_CPUFEATURE(USE_VMCALL, X86_SYNTH(30)) /* Use
VMCALL instead of VMMCAL
#define X86_BUG_NULL_SEG X86_BUG( 1) /* NULL-ing a selector preserves
the base and limit. */
#define X86_BUG_CLFLUSH_MFENCE X86_BUG( 2) /* MFENCE needed to serialise
CLFLUSH */
#define X86_BUG_IBPB_NO_RET X86_BUG( 3) /* IBPB doesn't flush the
RSB/RAS */
+#define X86_BUG_CLFLUSH_MONITOR X86_BUG( 4) /* MONITOR requires CLFLUSH */
#define X86_SPEC_NO_LFENCE_ENTRY_PV X86_BUG(16) /* (No) safety LFENCE for
SPEC_CTRL_ENTRY_PV. */
#define X86_SPEC_NO_LFENCE_ENTRY_INTR X86_BUG(17) /* (No) safety LFENCE for
SPEC_CTRL_ENTRY_INTR. */
--
generated by git-patchbot for /home/xen/git/xen.git#stable-4.20
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |