|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen stable-4.20] update Xen version to 4.20.1-pre
commit 9d465658b4052b4460995dca4ecb33ecb3d20ab5
Author: Jan Beulich <jbeulich@xxxxxxxx>
AuthorDate: Thu Mar 20 12:46:52 2025 +0100
Commit: Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Thu Mar 20 12:46:52 2025 +0100
update Xen version to 4.20.1-pre
---
Config.mk | 2 --
MAINTAINERS | 106 +++++------------------------------------------------------
xen/Makefile | 2 +-
3 files changed, 10 insertions(+), 100 deletions(-)
diff --git a/Config.mk b/Config.mk
index 1a86c03d11..74e57aebda 100644
--- a/Config.mk
+++ b/Config.mk
@@ -242,8 +242,6 @@ ETHERBOOT_NICS ?= rtl8139 8086100e
QEMU_TRADITIONAL_URL ?=
https://xenbits.xen.org/git-http/qemu-xen-traditional.git
QEMU_TRADITIONAL_REVISION ?= xen-4.20.0
-# Wed Jul 15 10:01:40 2020 +0100
-# qemu-trad: remove Xen path dependencies
# Specify which qemu-dm to use. This may be `ioemu' to use the old
# Mercurial in-tree version, or a local directory, or a git URL.
diff --git a/MAINTAINERS b/MAINTAINERS
index c11b82eca9..87ff7ad190 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -54,6 +54,15 @@ list. Remember to copy the appropriate stable branch
maintainer who
will be listed in this section of the MAINTAINERS file in the
appropriate branch.
+The maintainer for this branch is:
+
+ Jan Beulich <jbeulich@xxxxxxxx>
+
+Tools backport requests should also be copied to:
+
+       Anthony Perard <anthony.perard@xxxxxxxxxx>
+
+
Unstable Subsystem Maintainers
==============================
@@ -104,103 +113,6 @@ Descriptions of section entries:
xen-maintainers-<version format number of this file>
- Check-in policy
- ===============
-
-In order for a patch to be checked in, in general, several conditions
-must be met:
-
-1. In order to get a change to a given file committed, it must have
- the approval of at least one maintainer of that file.
-
- A patch of course needs Acks from the maintainers of each file that
- it changes; so a patch which changes xen/arch/x86/traps.c,
- xen/arch/x86/mm/p2m.c, and xen/arch/x86/mm/shadow/multi.c would
- require an Ack from each of the three sets of maintainers.
-
- See below for rules on nested maintainership.
-
-2. Each change must have appropriate approval from someone other than
- the person who wrote it. This can be either:
-
- a. An Acked-by from a maintainer of the code being touched (a
- co-maintainer if available, or a more general level maintainer if
- not available; see the secton on nested maintainership)
-
- b. A Reviewed-by by anyone of suitable stature in the community
-
-3. Sufficient time must have been given for anyone to respond. This
- depends in large part upon the urgency and nature of the patch.
- For a straightforward uncontroversial patch, a day or two may be
- sufficient; for a controversial patch, a week or two may be better.
-
-4. There must be no "open" objections.
-
-In a case where one person submits a patch and a maintainer gives an
-Ack, the Ack stands in for both the approval requirement (#1) and the
-Acked-by-non-submitter requirement (#2).
-
-In a case where a maintainer themselves submits a patch, the
-Signed-off-by meets the approval requirement (#1); so a Review
-from anyone in the community suffices for requirement #2.
-
-Before a maintainer checks in their own patch with another community
-member's R-b but no co-maintainer Ack, it is especially important to
-give their co-maintainer opportunity to give feedback, perhaps
-declaring their intention to check it in without their co-maintainers
-ack a day before doing so.
-
-In the case where two people collaborate on a patch, at least one of
-whom is a maintainer -- typically where one maintainer will do an
-early version of the patch, and another maintainer will pick it up and
-revise it -- there should be two Signed-off-by's and one Acked-by or
-Reviewed-by; with the maintainer who did the most recent change
-sending the patch, and an Acked-by or Reviewed-by coming from the
-maintainer who did not most recently edit the patch. This satisfies
-the requirement #2 because a) the Signed-off-by of the sender approves
-the final version of the patch; including all parts of the patch that
-the sender did not write b) the Reviewed-by approves the final version
-of the patch, including all patches that the reviewer did not write.
-Thus all code in the patch has been approved by someone who did not
-write it.
-
-Maintainers may choose to override non-maintainer objections in the
-case that consensus can't be reached.
-
-As always, no policy can cover all possible situations. In
-exceptional circumstances, committers may commit a patch in absence of
-one or more of the above requirements, if they are reasonably
-confident that the other maintainers will approve of their decision in
-retrospect.
-
- The meaning of nesting
- ======================
-
-Many maintainership areas are "nested": for example, there are entries
-for xen/arch/x86 as well as xen/arch/x86/mm, and even
-xen/arch/x86/mm/shadow; and there is a section at the end called "THE
-REST" which lists all committers. The meaning of nesting is that:
-
-1. Under normal circumstances, the Ack of the most specific maintainer
-is both necessary and sufficient to get a change to a given file
-committed. So a change to xen/arch/x86/mm/shadow/multi.c requires the
-the Ack of the xen/arch/x86/mm/shadow maintainer for that part of the
-patch, but would not require the Ack of the xen/arch/x86 maintainer or
-the xen/arch/x86/mm maintainer.
-
-2. In unusual circumstances, a more general maintainer's Ack can stand
-in for or even overrule a specific maintainer's Ack. Unusual
-circumstances might include:
- - The patch is fixing a high-priority issue causing immediate pain,
- and the more specific maintainer is not available.
- - The more specific maintainer has not responded either to the
- original patch, nor to "pings", within a reasonable amount of time.
- - The more general maintainer wants to overrule the more specific
- maintainer on some issue. (This should be exceptional.)
- - In the case of a disagreement between maintainers, THE REST can
- settle the matter by majority vote. (This should be very exceptional
- indeed.)
-
Maintainers List (try to look for most precise areas first)
diff --git a/xen/Makefile b/xen/Makefile
index 6bf0b0ea9e..7fa1b67487 100644
--- a/xen/Makefile
+++ b/xen/Makefile
@@ -6,7 +6,7 @@ this-makefile := $(call lastword,$(MAKEFILE_LIST))
# All other places this is stored (eg. compile.h) should be autogenerated.
export XEN_VERSION = 4
export XEN_SUBVERSION = 20
-export XEN_EXTRAVERSION ?= .0$(XEN_VENDORVERSION)
+export XEN_EXTRAVERSION ?= .1-pre$(XEN_VENDORVERSION)
export XEN_FULLVERSION = $(XEN_VERSION).$(XEN_SUBVERSION)$(XEN_EXTRAVERSION)
-include xen-version
--
generated by git-patchbot for /home/xen/git/xen.git#stable-4.20
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |