|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen master] drivers/char: rename arm-uart.c to uart-init.c
commit 7bd8d3789798997bb05cb2a7192705bdf9c10bb5
Author: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
AuthorDate: Tue Nov 19 15:55:32 2024 +0100
Commit: Julien Grall <jgrall@xxxxxxxxxx>
CommitDate: Thu Nov 28 19:12:04 2024 +0000
drivers/char: rename arm-uart.c to uart-init.c
Rename the file containing uart_init() to enable reuse across other
architectures that utilize device trees or SPCR tables to locate UART
information.
After locating UART data, {acpi}_device_init() is called to initialize
the UART.
arm_uart_init() is renamed to uart_init() to be reused by other
architectures.
A new configuration option, CONFIG_GENERIC_UART_INIT, is introduced,
currently available only for Arm. Enabling CONFIG_UART_INIT on additional
architectures will require additional functionality, such as device tree
mapping and unflattening, etc.
arm-uart.c is removed from "ARM (W/ VIRTUALIZATION EXTENSIONS) ARCHITECTURE"
section in the MAINTAINERS file, as it is no longer Arm-specific and can
now be maintained by maintainers of other architectures.
Use GENERIC_UART_INIT for CONFIG_ARM by adding `select GENERIC_UART_INIT`
to CONFIG_ARM.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
Reviewed-by: Michal Orzel <michal.orzel@xxxxxxx>
Acked-by: Julien Grall <jgrall@xxxxxxxxxx>
---
MAINTAINERS | 1 -
xen/arch/arm/Kconfig | 1 +
xen/arch/arm/setup.c | 2 +-
xen/drivers/char/Kconfig | 3 +
xen/drivers/char/Makefile | 2 +-
xen/drivers/char/arm-uart.c | 145 -------------------------------------------
xen/drivers/char/uart-init.c | 138 ++++++++++++++++++++++++++++++++++++++++
xen/include/xen/serial.h | 2 +-
8 files changed, 145 insertions(+), 149 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 17fc5f9eec..026aa25a53 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -245,7 +245,6 @@ S: Supported
L: xen-devel@xxxxxxxxxxxxxxxxxxxx
F: docs/misc/arm/
F: xen/arch/arm/
-F: xen/drivers/char/arm-uart.c
F: xen/drivers/char/cadence-uart.c
F: xen/drivers/char/exynos4210-uart.c
F: xen/drivers/char/imx-lpuart.c
diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig
index 15b2e4a227..23bbc91aad 100644
--- a/xen/arch/arm/Kconfig
+++ b/xen/arch/arm/Kconfig
@@ -12,6 +12,7 @@ config ARM_64
config ARM
def_bool y
select FUNCTION_ALIGNMENT_4B
+ select GENERIC_UART_INIT
select HAS_ALTERNATIVE if HAS_VMAP
select HAS_DEVICE_TREE
select HAS_PASSTHROUGH
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index 71ebaa77ca..2e27af4560 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -361,7 +361,7 @@ void asmlinkage __init start_xen(unsigned long fdt_paddr)
gic_preinit();
- arm_uart_init();
+ uart_init();
console_init_preirq();
console_init_ring();
diff --git a/xen/drivers/char/Kconfig b/xen/drivers/char/Kconfig
index e175d07c02..e6e12bb413 100644
--- a/xen/drivers/char/Kconfig
+++ b/xen/drivers/char/Kconfig
@@ -1,3 +1,6 @@
+config GENERIC_UART_INIT
+ bool
+
config HAS_NS16550
bool "NS16550 UART driver" if ARM
default n if RISCV
diff --git a/xen/drivers/char/Makefile b/xen/drivers/char/Makefile
index d3b987da1d..8cbbffdca8 100644
--- a/xen/drivers/char/Makefile
+++ b/xen/drivers/char/Makefile
@@ -11,7 +11,7 @@ obj-$(CONFIG_HAS_EHCI) += ehci-dbgp.o
obj-$(CONFIG_XHCI) += xhci-dbc.o
obj-$(CONFIG_HAS_IMX_LPUART) += imx-lpuart.o
obj-$(CONFIG_HAS_LINFLEX) += linflex-uart.o
-obj-$(CONFIG_ARM) += arm-uart.o
+obj-$(CONFIG_GENERIC_UART_INIT) += uart-init.o
obj-y += serial.o
obj-$(CONFIG_XEN_GUEST) += xen_pv_console.o
obj-$(CONFIG_PV_SHIM) += consoled.o
diff --git a/xen/drivers/char/arm-uart.c b/xen/drivers/char/arm-uart.c
deleted file mode 100644
index 91f13a4136..0000000000
--- a/xen/drivers/char/arm-uart.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * xen/drivers/char/arm-uart.c
- *
- * Generic uart retrieved via the device tree or ACPI
- *
- * Julien Grall <julien.grall@xxxxxxxxxx>
- * Copyright (c) 2013 Linaro Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <asm/device.h>
-
-#include <xen/console.h>
-#include <xen/device_tree.h>
-#include <xen/param.h>
-#include <xen/serial.h>
-#include <xen/errno.h>
-#include <xen/acpi.h>
-
-/*
- * Configure UART port with a string:
- * path:options
- *
- * @path: full path used in the device tree for the UART. If the path
- * doesn't start with '/', we assuming that it's an alias.
- * @options: UART speficic options (see in each UART driver)
- */
-static char __initdata opt_dtuart[256] = "";
-string_param("dtuart", opt_dtuart);
-
-static void __init dt_uart_init(void)
-{
- struct dt_device_node *dev;
- int ret;
- const char *devpath = opt_dtuart;
- const char *options;
- char *split;
-
- if ( !console_has("dtuart") )
- return; /* Not for us */
-
- if ( !strcmp(opt_dtuart, "") )
- {
- const struct dt_device_node *chosen = dt_find_node_by_path("/chosen");
-
- if ( chosen )
- {
- const char *stdout;
-
- ret = dt_property_read_string(chosen, "stdout-path", &stdout);
- if ( ret >= 0 )
- {
- printk("Taking dtuart configuration from
/chosen/stdout-path\n");
- if ( strlcpy(opt_dtuart, stdout, sizeof(opt_dtuart))
- >= sizeof(opt_dtuart) )
- printk("WARNING: /chosen/stdout-path too long,
truncated\n");
- }
- else if ( ret != -EINVAL /* Not present */ )
- printk("Failed to read /chosen/stdout-path (%d)\n", ret);
- }
- }
-
- if ( !strcmp(opt_dtuart, "") )
- {
- printk("No dtuart path configured\n");
- return;
- }
-
- split = strchr(opt_dtuart, ':');
- if ( split )
- {
- split[0] = '\0';
- options = split + 1;
- }
- else
- options = "";
-
- printk("Looking for dtuart at \"%s\", options \"%s\"\n", devpath, options);
- if ( *devpath == '/' )
- dev = dt_find_node_by_path(devpath);
- else
- dev = dt_find_node_by_alias(devpath);
-
- if ( !dev )
- {
- printk("Unable to find device \"%s\"\n", devpath);
- return;
- }
-
- ret = device_init(dev, DEVICE_SERIAL, options);
-
- if ( ret )
- printk("Unable to initialize dtuart: %d\n", ret);
-}
-
-#ifdef CONFIG_ACPI
-static void __init acpi_uart_init(void)
-{
- struct acpi_table_spcr *spcr = NULL;
- int ret;
-
- acpi_get_table(ACPI_SIG_SPCR, 0, (struct acpi_table_header **)&spcr);
-
- if ( spcr == NULL )
- {
- printk("Unable to get spcr table\n");
- }
- else
- {
- ret = acpi_device_init(DEVICE_SERIAL, NULL, spcr->interface_type);
-
- if ( ret )
- printk("Unable to initialize acpi uart: %d\n", ret);
- }
-}
-#else
-static void __init acpi_uart_init(void) { }
-#endif
-
-void __init arm_uart_init(void)
-{
- if ( acpi_disabled )
- dt_uart_init();
- else
- acpi_uart_init();
-}
-
-/*
- * Local variables:
- * mode: C
- * c-file-style: "BSD"
- * c-basic-offset: 4
- * tab-width: 4
- * indent-tabs-mode: nil
- * End:
- */
diff --git a/xen/drivers/char/uart-init.c b/xen/drivers/char/uart-init.c
new file mode 100644
index 0000000000..a218139938
--- /dev/null
+++ b/xen/drivers/char/uart-init.c
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/*
+ * Derived from:
+ * xen/drivers/char/arm-uart.c
+ *
+ * Generic uart retrieved via the device tree or ACPI
+ *
+ * Julien Grall <julien.grall@xxxxxxxxxx>
+ * Copyright (c) 2013 Linaro Limited.
+ */
+
+#include <asm/device.h>
+
+#include <xen/console.h>
+#include <xen/device_tree.h>
+#include <xen/param.h>
+#include <xen/serial.h>
+#include <xen/errno.h>
+#include <xen/acpi.h>
+
+/*
+ * Configure UART port with a string:
+ * path:options
+ *
+ * @path: full path used in the device tree for the UART. If the path
+ * doesn't start with '/', we assuming that it's an alias.
+ * @options: UART speficic options (see in each UART driver)
+ */
+static char __initdata opt_dtuart[256] = "";
+string_param("dtuart", opt_dtuart);
+
+static void __init dt_uart_init(void)
+{
+ struct dt_device_node *dev;
+ int ret;
+ const char *devpath = opt_dtuart;
+ const char *options;
+ char *split;
+
+ if ( !console_has("dtuart") )
+ return; /* Not for us */
+
+ if ( !strcmp(opt_dtuart, "") )
+ {
+ const struct dt_device_node *chosen = dt_find_node_by_path("/chosen");
+
+ if ( chosen )
+ {
+ const char *stdout;
+
+ ret = dt_property_read_string(chosen, "stdout-path", &stdout);
+ if ( ret >= 0 )
+ {
+ printk("Taking dtuart configuration from
/chosen/stdout-path\n");
+ if ( strlcpy(opt_dtuart, stdout, sizeof(opt_dtuart))
+ >= sizeof(opt_dtuart) )
+ printk("WARNING: /chosen/stdout-path too long,
truncated\n");
+ }
+ else if ( ret != -EINVAL /* Not present */ )
+ printk("Failed to read /chosen/stdout-path (%d)\n", ret);
+ }
+ }
+
+ if ( !strcmp(opt_dtuart, "") )
+ {
+ printk("No dtuart path configured\n");
+ return;
+ }
+
+ split = strchr(opt_dtuart, ':');
+ if ( split )
+ {
+ split[0] = '\0';
+ options = split + 1;
+ }
+ else
+ options = "";
+
+ printk("Looking for dtuart at \"%s\", options \"%s\"\n", devpath, options);
+ if ( *devpath == '/' )
+ dev = dt_find_node_by_path(devpath);
+ else
+ dev = dt_find_node_by_alias(devpath);
+
+ if ( !dev )
+ {
+ printk("Unable to find device \"%s\"\n", devpath);
+ return;
+ }
+
+ ret = device_init(dev, DEVICE_SERIAL, options);
+
+ if ( ret )
+ printk("Unable to initialize dtuart: %d\n", ret);
+}
+
+#ifdef CONFIG_ACPI
+static void __init acpi_uart_init(void)
+{
+ struct acpi_table_spcr *spcr = NULL;
+ int ret;
+
+ acpi_get_table(ACPI_SIG_SPCR, 0, (struct acpi_table_header **)&spcr);
+
+ if ( spcr == NULL )
+ {
+ printk("Unable to get spcr table\n");
+ }
+ else
+ {
+ ret = acpi_device_init(DEVICE_SERIAL, NULL, spcr->interface_type);
+
+ if ( ret )
+ printk("Unable to initialize acpi uart: %d\n", ret);
+ }
+}
+#else
+static void __init acpi_uart_init(void) { }
+#endif
+
+void __init uart_init(void)
+{
+ if ( acpi_disabled )
+ dt_uart_init();
+ else
+ acpi_uart_init();
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/xen/include/xen/serial.h b/xen/include/xen/serial.h
index 3d21207a3d..63a82b032d 100644
--- a/xen/include/xen/serial.h
+++ b/xen/include/xen/serial.h
@@ -166,7 +166,7 @@ void xhci_dbc_uart_init(void);
static void inline xhci_dbc_uart_init(void) {}
#endif
-void arm_uart_init(void);
+void uart_init(void);
struct physdev_dbgp_op;
int dbgp_op(const struct physdev_dbgp_op *op);
--
generated by git-patchbot for /home/xen/git/xen.git#master
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |