[xen master] x86/dom0: delay setting SMAP after dom0 build is done

[patchbot@xxxxxxx]

commit ac6b9309694de9b2b5163886656282f6ada71565
Author:     Roger Pau Monné <roger.pau@xxxxxxxxxx>
AuthorDate: Mon Aug 5 10:18:05 2024 +0200
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Mon Aug 5 10:18:05 2024 +0200

    x86/dom0: delay setting SMAP after dom0 build is done
    
    Delay setting X86_CR4_SMAP on the BSP until the domain building is done, so
    that there's no need to disable SMAP.  Note however that SMAP is enabled for
    the APs on bringup, as domain builder code strictly run on the BSP.  
Delaying
    the setting for the APs would mean having to do a callfunc IPI later in 
order
    to set it on all the APs.
    
    The fixes tag is to account for the wrong usage of cpu_has_smap in
    create_dom0(), it should instead have used
    boot_cpu_has(X86_FEATURE_XEN_SMAP).
    
    While there also make cr4_pv32_mask __ro_after_init.
    
    Fixes: 493ab190e5b1 ('xen/sm{e, a}p: allow disabling sm{e, a}p for Xen 
itself')
    Suggested-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
---
 xen/arch/x86/setup.c | 48 +++++++++++++++++++++++++++---------------------
 1 file changed, 27 insertions(+), 21 deletions(-)

diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index eee20bb175..a7a85e94e3 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -80,7 +80,7 @@ int8_t __initdata opt_probe_port_aliases = -1;
 boolean_param("probe-port-aliases", opt_probe_port_aliases);
 
 /* Only used in asm code and within this source file */
-unsigned long asmlinkage __read_mostly cr4_pv32_mask;
+unsigned long asmlinkage __ro_after_init cr4_pv32_mask;
 
 /* **** Linux config option: propagated to domain0. */
 /* "acpi=off":    Sisables both ACPI table parsing and interpreter. */
@@ -955,26 +955,9 @@ static struct domain *__init create_dom0(const module_t 
*image,
         }
     }
 
-    /*
-     * Temporarily clear SMAP in CR4 to allow user-accesses in 
construct_dom0().
-     * This saves a large number of corner cases interactions with
-     * copy_from_user().
-     */
-    if ( cpu_has_smap )
-    {
-        cr4_pv32_mask &= ~X86_CR4_SMAP;
-        write_cr4(read_cr4() & ~X86_CR4_SMAP);
-    }
-
     if ( construct_dom0(d, image, headroom, initrd, cmdline) != 0 )
         panic("Could not construct domain 0\n");
 
-    if ( cpu_has_smap )
-    {
-        write_cr4(read_cr4() | X86_CR4_SMAP);
-        cr4_pv32_mask |= X86_CR4_SMAP;
-    }
-
     return d;
 }
 
@@ -1907,16 +1890,26 @@ void asmlinkage __init noreturn __start_xen(unsigned 
long mbi_p)
     if ( cpu_has_smep && opt_smep != SMEP_HVM_ONLY )
         setup_force_cpu_cap(X86_FEATURE_XEN_SMEP);
     if ( boot_cpu_has(X86_FEATURE_XEN_SMEP) )
+    {
         set_in_cr4(X86_CR4_SMEP);
+        BUILD_BUG_ON(!(X86_CR4_SMEP & XEN_CR4_PV32_BITS));
+        cr4_pv32_mask |= X86_CR4_SMEP;
+    }
 
     if ( !opt_smap )
         setup_clear_cpu_cap(X86_FEATURE_SMAP);
     if ( cpu_has_smap && opt_smap != SMAP_HVM_ONLY )
         setup_force_cpu_cap(X86_FEATURE_XEN_SMAP);
     if ( boot_cpu_has(X86_FEATURE_XEN_SMAP) )
-        set_in_cr4(X86_CR4_SMAP);
-
-    cr4_pv32_mask = mmu_cr4_features & XEN_CR4_PV32_BITS;
+        /*
+         * Set SMAP on the %cr4 mask so that it's set for APs on bringup, but
+         * don't set for the BSP until domain building is done.
+         *
+         * Don't set it in cr4_pv32_mask either, until it's also set on the
+         * BSP.  Otherwise the BUG in cr4_pv32_restore would trigger for events
+         * received on the BSP.
+         */
+        mmu_cr4_features |= X86_CR4_SMAP;
 
     if ( boot_cpu_has(X86_FEATURE_FSGSBASE) )
         set_in_cr4(X86_CR4_FSGSBASE);
@@ -2048,6 +2041,19 @@ void asmlinkage __init noreturn __start_xen(unsigned 
long mbi_p)
     if ( !dom0 )
         panic("Could not set up DOM0 guest OS\n");
 
+    /*
+     * Enable SMAP only after being done with the domain building phase, as the
+     * PV builder switches to the domain page-tables and must be run with SMAP
+     * disabled.
+     */
+    if ( boot_cpu_has(X86_FEATURE_XEN_SMAP) )
+    {
+        ASSERT(mmu_cr4_features & X86_CR4_SMAP);
+        write_cr4(read_cr4() | X86_CR4_SMAP);
+        BUILD_BUG_ON(!(X86_CR4_SMAP & XEN_CR4_PV32_BITS));
+        cr4_pv32_mask |= X86_CR4_SMAP;
+    }
+
     heap_init_late();
 
     init_trace_bufs();
--
generated by git-patchbot for /home/xen/git/xen.git#master