|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen staging] xen/arm32: head: Introduce get_table_slot() and use it
commit f93f7f70deca381e232968dc21da16522f28da6a
Author: Julien Grall <jgrall@xxxxxxxxxx>
AuthorDate: Fri Aug 12 20:24:42 2022 +0100
Commit: Julien Grall <julien@xxxxxxx>
CommitDate: Wed Aug 31 20:16:22 2022 +0100
xen/arm32: head: Introduce get_table_slot() and use it
There are a few places in the code that need to find the slot at a
given page-table level.
So create a new macro get_table_slot() for that. This will reduce
the effort to figure out whether the code is doing the right thing.
The new macro is using 'ubfx' (or 'lsr' for the first level) rather
than the existing sequence (mov_w, lsr, and) because it doesn't require
a scratch register and reduce the number of instructions (4 -> 1).
Signed-off-by: Julien Grall <jgrall@xxxxxxxxxx>
Reviewed-by: Bertrand Marquis <bertrand.marquis@xxxxxxx>
Tested-by: Bertrand Marquis <bertrand.marquis@xxxxxxx>
Reviewed-by: Wei Chen <Wei.Chen@xxxxxxx>
---
xen/arch/arm/arm32/head.S | 56 +++++++++++++++++++++++++++--------------------
1 file changed, 32 insertions(+), 24 deletions(-)
diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
index 46d93bebba..50f6fa4eb3 100644
--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -358,13 +358,31 @@ cpu_init_done:
mov pc, r5 /* Return address is in r5 */
ENDPROC(cpu_init)
+/*
+ * Macro to find the slot number at a given page-table level
+ *
+ * slot: slot computed
+ * virt: virtual address
+ * lvl: page-table level
+ *
+ * Note that ubxf is unpredictable when the end bit is above 32-bit. So we
+ * can't use it for first level offset.
+ */
+.macro get_table_slot, slot, virt, lvl
+ .if \lvl == 1
+ lsr \slot, \virt, #XEN_PT_LEVEL_SHIFT(\lvl)
+ .else
+ ubfx \slot, \virt, #XEN_PT_LEVEL_SHIFT(\lvl), #XEN_PT_LPAE_SHIFT
+ .endif
+.endm
+
/*
* Macro to create a page table entry in \ptbl to \tbl
*
* ptbl: table symbol where the entry will be created
* tbl: table symbol to point to
* virt: virtual address
- * shift: #imm page table shift
+ * lvl: page-table level
* mmu: Is the MMU turned on/off. If not specified it will be off
*
* Preserves \virt
@@ -374,11 +392,9 @@ ENDPROC(cpu_init)
*
* Note that \virt should be in a register other than r1 - r4
*/
-.macro create_table_entry, ptbl, tbl, virt, shift, mmu=0
- lsr r1, \virt, #\shift
- mov_w r2, XEN_PT_LPAE_ENTRY_MASK
- and r1, r1, r2 /* r1 := slot in \tlb */
- lsl r1, r1, #3 /* r1 := slot offset in \tlb */
+.macro create_table_entry, ptbl, tbl, virt, lvl, mmu=0
+ get_table_slot r1, \virt, \lvl /* r1 := slot in \tlb */
+ lsl r1, r1, #3 /* r1 := slot offset in \tlb */
load_paddr r4, \tbl
@@ -448,8 +464,8 @@ ENDPROC(cpu_init)
create_page_tables:
/* Prepare the page-tables for mapping Xen */
ldr r0, =XEN_VIRT_START
- create_table_entry boot_pgtable, boot_second, r0, FIRST_SHIFT
- create_table_entry boot_second, boot_third, r0, SECOND_SHIFT
+ create_table_entry boot_pgtable, boot_second, r0, 1
+ create_table_entry boot_second, boot_third, r0, 2
/* Setup boot_third: */
adr_l r4, boot_third, mmu=0
@@ -486,12 +502,10 @@ create_page_tables:
* then the 1:1 mapping will use its own set of page-tables from
* the second level.
*/
- lsr r1, r9, #FIRST_SHIFT
- mov_w r0, XEN_PT_LPAE_ENTRY_MASK
- and r1, r1, r0 /* r1 := first slot */
+ get_table_slot r1, r9, 1 /* r1 := first slot */
cmp r1, #XEN_FIRST_SLOT
beq 1f
- create_table_entry boot_pgtable, boot_second_id, r9, FIRST_SHIFT
+ create_table_entry boot_pgtable, boot_second_id, r9, 1
b link_from_second_id
1:
@@ -501,16 +515,14 @@ create_page_tables:
* third level. For slot XEN_SECOND_SLOT, Xen is not yet able to handle
* it.
*/
- lsr r1, r9, #SECOND_SHIFT
- mov_w r0, XEN_PT_LPAE_ENTRY_MASK
- and r1, r1, r0 /* r1 := second slot */
+ get_table_slot r1, r9, 2 /* r1 := second slot */
cmp r1, #XEN_SECOND_SLOT
beq virtphys_clash
- create_table_entry boot_second, boot_third_id, r9, SECOND_SHIFT
+ create_table_entry boot_second, boot_third_id, r9, 2
b link_from_third_id
link_from_second_id:
- create_table_entry boot_second_id, boot_third_id, r9, SECOND_SHIFT
+ create_table_entry boot_second_id, boot_third_id, r9, 2
link_from_third_id:
create_mapping_entry boot_third_id, r9, r9
mov pc, lr
@@ -571,9 +583,7 @@ remove_identity_mapping:
* Find the first slot used. Remove the entry for the first
* table if the slot is not XEN_FIRST_SLOT.
*/
- lsr r1, r9, #FIRST_SHIFT
- mov_w r0, XEN_PT_LPAE_ENTRY_MASK
- and r1, r1, r0 /* r1 := first slot */
+ get_table_slot r1, r9, 1 /* r1 := first slot */
cmp r1, #XEN_FIRST_SLOT
beq 1f
/* It is not in slot 0, remove the entry */
@@ -587,9 +597,7 @@ remove_identity_mapping:
* Find the second slot used. Remove the entry for the first
* table if the slot is not XEN_SECOND_SLOT.
*/
- lsr r1, r9, #SECOND_SHIFT
- mov_w r0, XEN_PT_LPAE_ENTRY_MASK
- and r1, r1, r0 /* r1 := second slot */
+ get_table_slot r1, r9, 2 /* r1 := second slot */
cmp r1, #XEN_SECOND_SLOT
beq identity_mapping_removed
/* It is not in slot 1, remove the entry */
@@ -628,7 +636,7 @@ setup_fixmap:
#endif
/* Map fixmap into boot_second */
mov_w r0, FIXMAP_ADDR(0)
- create_table_entry boot_second, xen_fixmap, r0, SECOND_SHIFT, mmu=1
+ create_table_entry boot_second, xen_fixmap, r0, 2, mmu=1
/* Ensure any page table updates made above have occurred. */
dsb nshst
--
generated by git-patchbot for /home/xen/git/xen.git#staging
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |