[xen staging-4.13] x86/spec-ctrl: Only adjust MSR_SPEC_CTRL for idle with legacy IBRS

[patchbot@xxxxxxx]

commit 159e2235d75bd83bc9924d50e52b9b575b042709
Author:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
AuthorDate: Mon Jun 27 11:54:27 2022 +0100
Commit:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
CommitDate: Tue Jul 12 16:33:19 2022 +0100

    x86/spec-ctrl: Only adjust MSR_SPEC_CTRL for idle with legacy IBRS
    
    Back at the time of the original Spectre-v2 fixes, it was recommended to 
clear
    MSR_SPEC_CTRL when going idle.  This is because of the side effects on the
    sibling thread caused by the microcode IBRS and STIBP implementations which
    were retrofitted to existing CPUs.
    
    However, there are no relevant cross-thread impacts for the hardware
    IBRS/STIBP implementations, so this logic should not be used on Intel CPUs
    supporting eIBRS, or any AMD CPUs; doing so only adds unnecessary latency to
    the idle path.
    
    Furthermore, there's no point playing with MSR_SPEC_CTRL in the idle paths 
if
    SMT is disabled for other reasons.
    
    Fixes: 8d03080d2a33 ("x86/spec-ctrl: Cease using thunk=lfence on AMD")
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
    (cherry picked from commit ffc7694e0c99eea158c32aa164b7d1e1bb1dc46b)
---
 xen/arch/x86/spec_ctrl.c          | 10 ++++++++--
 xen/include/asm-x86/cpufeatures.h |  2 +-
 xen/include/asm-x86/spec_ctrl.h   |  5 +++--
 3 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/xen/arch/x86/spec_ctrl.c b/xen/arch/x86/spec_ctrl.c
index a768c57b45..e037e9b52e 100644
--- a/xen/arch/x86/spec_ctrl.c
+++ b/xen/arch/x86/spec_ctrl.c
@@ -1080,8 +1080,14 @@ void __init init_speculation_mitigations(void)
     /* (Re)init BSP state now that default_spec_ctrl_flags has been 
calculated. */
     init_shadow_spec_ctrl_state();
 
-    /* If Xen is using any MSR_SPEC_CTRL settings, adjust the idle path. */
-    if ( default_xen_spec_ctrl )
+    /*
+     * For microcoded IBRS only (i.e. Intel, pre eIBRS), it is recommended to
+     * clear MSR_SPEC_CTRL before going idle, to avoid impacting sibling
+     * threads.  Activate this if SMT is enabled, and Xen is using a non-zero
+     * MSR_SPEC_CTRL setting.
+     */
+    if ( boot_cpu_has(X86_FEATURE_IBRSB) && !(caps & ARCH_CAPS_IBRS_ALL) &&
+         hw_smt_enabled && default_xen_spec_ctrl )
         setup_force_cpu_cap(X86_FEATURE_SC_MSR_IDLE);
 
     xpti_init_default(caps);
diff --git a/xen/include/asm-x86/cpufeatures.h 
b/xen/include/asm-x86/cpufeatures.h
index bcba926bda..fc54c24a34 100644
--- a/xen/include/asm-x86/cpufeatures.h
+++ b/xen/include/asm-x86/cpufeatures.h
@@ -33,7 +33,7 @@ XEN_CPUFEATURE(SC_MSR_HVM,        X86_SYNTH(17)) /* 
MSR_SPEC_CTRL used by Xen fo
 XEN_CPUFEATURE(SC_RSB_PV,         X86_SYNTH(18)) /* RSB overwrite needed for 
PV */
 XEN_CPUFEATURE(SC_RSB_HVM,        X86_SYNTH(19)) /* RSB overwrite needed for 
HVM */
 XEN_CPUFEATURE(XEN_SELFSNOOP,     X86_SYNTH(20)) /* SELFSNOOP gets used by Xen 
itself */
-XEN_CPUFEATURE(SC_MSR_IDLE,       X86_SYNTH(21)) /* (SC_MSR_PV || SC_MSR_HVM) 
&& default_xen_spec_ctrl */
+XEN_CPUFEATURE(SC_MSR_IDLE,       X86_SYNTH(21)) /* Clear MSR_SPEC_CTRL on 
idle */
 XEN_CPUFEATURE(XEN_LBR,           X86_SYNTH(22)) /* Xen uses MSR_DEBUGCTL.LBR 
*/
 /* Bits 23,24 unused. */
 XEN_CPUFEATURE(SC_VERW_IDLE,      X86_SYNTH(25)) /* VERW used by Xen for idle 
*/
diff --git a/xen/include/asm-x86/spec_ctrl.h b/xen/include/asm-x86/spec_ctrl.h
index 157a2c67d8..ffc054975e 100644
--- a/xen/include/asm-x86/spec_ctrl.h
+++ b/xen/include/asm-x86/spec_ctrl.h
@@ -80,7 +80,8 @@ static always_inline void spec_ctrl_enter_idle(struct 
cpu_info *info)
     uint32_t val = 0;
 
     /*
-     * Branch Target Injection:
+     * It is recommended in some cases to clear MSR_SPEC_CTRL when going idle,
+     * to avoid impacting sibling threads.
      *
      * Latch the new shadow value, then enable shadowing, then update the MSR.
      * There are no SMP issues here; only local processor ordering concerns.
@@ -116,7 +117,7 @@ static always_inline void spec_ctrl_exit_idle(struct 
cpu_info *info)
     uint32_t val = info->xen_spec_ctrl;
 
     /*
-     * Branch Target Injection:
+     * Restore MSR_SPEC_CTRL on exit from idle.
      *
      * Disable shadowing before updating the MSR.  There are no SMP issues
      * here; only local processor ordering concerns.
--
generated by git-patchbot for /home/xen/git/xen.git#staging-4.13