[Xen-changelog] [xen staging-4.13] x86/apic: fix disabling LVT0 in disconnect_bsp_APIC

[patchbot@xxxxxxx]

commit c080e5b43dcc62d1c4d9a05fbb17e3b8d95f8eaa
Author:     Roger Pau Monné <roger.pau@xxxxxxxxxx>
AuthorDate: Thu Mar 5 10:56:38 2020 +0100
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Thu Mar 5 10:56:38 2020 +0100

    x86/apic: fix disabling LVT0 in disconnect_bsp_APIC
    
    The Intel SDM states:
    
    "When an illegal vector value (0 to 15) is written to a LVT entry and
    the delivery mode is Fixed (bits 8-11 equal 0), the APIC may signal an
    illegal vector error, without regard to whether the mask bit is set or
    whether an interrupt is actually seen on the input."
    
    And that's exactly what's currently done in disconnect_bsp_APIC when
    virt_wire_setup is true and LVT LINT0 is being masked. By writing only
    APIC_LVT_MASKED Xen is actually setting the vector to 0 and the
    delivery mode to Fixed (0), and hence it triggers an APIC error even
    when the LVT entry is masked.
    
    This would usually manifest when Xen is being shut down, as that's
    where disconnect_bsp_APIC is called:
    
    (XEN) APIC error on CPU0: 40(00)
    
    Fix this by calling clear_local_APIC prior to setting the LVT LINT
    registers which already clear LVT LINT0, and hence the troublesome
    write can be avoided as the register is already cleared.
    
    Reported-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
    master commit: 782b48b7f7319c07b044606d67a60875e53dd05b
    master date: 2020-01-29 14:47:00 +0100
---
 xen/arch/x86/apic.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/xen/arch/x86/apic.c b/xen/arch/x86/apic.c
index a8ee18636f..bf39937e9c 100644
--- a/xen/arch/x86/apic.c
+++ b/xen/arch/x86/apic.c
@@ -259,6 +259,8 @@ void disconnect_bsp_APIC(int virt_wire_setup)
         /* Go back to Virtual Wire compatibility mode */
         unsigned long value;
 
+        clear_local_APIC();
+
         /* For the spurious interrupt use vector F, and enable it */
         value = apic_read(APIC_SPIV);
         value &= ~APIC_VECTOR_MASK;
@@ -276,10 +278,6 @@ void disconnect_bsp_APIC(int virt_wire_setup)
             value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
             apic_write(APIC_LVT0, value);
         }
-        else {
-            /* Disable LVT0 */
-            apic_write(APIC_LVT0, APIC_LVT_MASKED);
-        }
 
         /* For LVT1 make it edge triggered, active high, nmi and enabled */
         value = apic_read(APIC_LVT1);
--
generated by git-patchbot for /home/xen/git/xen.git#staging-4.13

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog