[Xen-changelog] [qemu-xen-traditional stable-4.6] vga: make sure vga register setup for vbe stays intact (CVE-2016-3712).

[patchbot@xxxxxxx]

commit 97042b958cc0fa87705ebd59d58559c81d4b5854
Author:     Gerd Hoffmann <kraxel@xxxxxxxxxx>
AuthorDate: Tue Apr 26 14:48:06 2016 +0200
Commit:     Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx>
CommitDate: Tue May 10 18:57:47 2016 +0100

    vga: make sure vga register setup for vbe stays intact (CVE-2016-3712).
    
    Call vbe_update_vgaregs() when the guest touches GFX, SEQ or CRT
    registers, to make sure the vga registers will always have the
    values needed by vbe mode.  This makes sure the sanity checks
    applied by vbe_fixup_regs() are effective.
    
    Without this guests can muck with shift_control, can turn on planar
    vga modes or text mode emulation while VBE is active, making qemu
    take code paths meant for CGA compatibility, but with the very
    large display widths and heigts settable using VBE registers.
    
    Which is good for one or another buffer overflow.  Not that
    critical as they typically read overflows happening somewhere
    in the display code.  So guests can DoS by crashing qemu with a
    segfault, but it is probably not possible to break out of the VM.
    
    Fixes: CVE-2016-3712
    Reported-by: Zuozhi Fzz <zuozhi.fzz@xxxxxxxxxxxxxxx>
    Reported-by: P J P <ppandit@xxxxxxxxxx>
    Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxxxxx>
    [Backport to qemu-xen-tradition]
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
---
 hw/vga.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/hw/vga.c b/hw/vga.c
index b1b501b..5778c7d 100644
--- a/hw/vga.c
+++ b/hw/vga.c
@@ -160,6 +160,8 @@ static uint32_t expand4[256];
 static uint16_t expand2[256];
 static uint8_t expand4to8[16];
 
+static void vbe_update_vgaregs(VGAState *s);
+
 static inline bool vbe_enabled(VGAState *s)
 {
     return s->vbe_regs[VBE_DISPI_INDEX_ENABLE] & VBE_DISPI_ENABLED;
@@ -449,6 +451,7 @@ static void vga_ioport_write(void *opaque, uint32_t addr, 
uint32_t val)
         printf("vga: write SR%x = 0x%02x\n", s->sr_index, val);
 #endif
         s->sr[s->sr_index] = val & sr_mask[s->sr_index];
+        vbe_update_vgaregs(s);
         if (s->sr_index == 1) s->update_retrace_info(s);
         break;
     case 0x3c7:
@@ -477,6 +480,7 @@ static void vga_ioport_write(void *opaque, uint32_t addr, 
uint32_t val)
         printf("vga: write GR%x = 0x%02x\n", s->gr_index, val);
 #endif
         s->gr[s->gr_index] = val & gr_mask[s->gr_index];
+        vbe_update_vgaregs(s);
         break;
     case 0x3b4:
     case 0x3d4:
@@ -490,8 +494,10 @@ static void vga_ioport_write(void *opaque, uint32_t addr, 
uint32_t val)
         /* handle CR0-7 protection */
         if ((s->cr[0x11] & 0x80) && s->cr_index <= 7) {
             /* can always write bit 4 of CR7 */
-            if (s->cr_index == 7)
+            if (s->cr_index == 7) {
                 s->cr[7] = (s->cr[7] & ~0x10) | (val & 0x10);
+                vbe_update_vgaregs(s);
+            }
             return;
         }
         switch(s->cr_index) {
@@ -507,6 +513,7 @@ static void vga_ioport_write(void *opaque, uint32_t addr, 
uint32_t val)
             s->cr[s->cr_index] = val;
             break;
         }
+        vbe_update_vgaregs(s);
 
         switch(s->cr_index) {
         case 0x00:
--
generated by git-patchbot for /home/xen/git/qemu-xen-traditional.git#stable-4.6

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog