|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen master] hvmloader/e820: construct guest e820 table
commit 596dd0042a06b746507879dbbde9a81bf46e5eb5
Author: Tiejun Chen <tiejun.chen@xxxxxxxxx>
AuthorDate: Wed Jul 22 01:39:58 2015 +0000
Commit: Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx>
CommitDate: Thu Jul 23 13:45:25 2015 +0100
hvmloader/e820: construct guest e820 table
Now use the hypervisor-supplied memory map to build our final e820 table:
* Add regions for BIOS ranges and other special mappings not in the
hypervisor map
* Add in the hypervisor supplied regions
* Adjust the lowmem and highmem regions if we've had to relocate
memory (adding a highmem region if necessary)
* Sort all the ranges so that they appear in memory order.
CC: Keir Fraser <keir@xxxxxxx>
CC: Jan Beulich <jbeulich@xxxxxxxx>
CC: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
CC: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
CC: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
CC: Ian Campbell <ian.campbell@xxxxxxxxxx>
CC: Wei Liu <wei.liu2@xxxxxxxxxx>
Reviewed-by: George Dunlap <george.dunlap@xxxxxxxxxxxxx>
Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
Signed-off-by: Tiejun Chen <tiejun.chen@xxxxxxxxx>
---
tools/firmware/hvmloader/e820.c | 109 ++++++++++++++++++++++++++++++++++-----
1 files changed, 96 insertions(+), 13 deletions(-)
diff --git a/tools/firmware/hvmloader/e820.c b/tools/firmware/hvmloader/e820.c
index 7a414ab..a6cacdf 100644
--- a/tools/firmware/hvmloader/e820.c
+++ b/tools/firmware/hvmloader/e820.c
@@ -105,7 +105,11 @@ int build_e820_table(struct e820entry *e820,
unsigned int lowmem_reserved_base,
unsigned int bios_image_base)
{
- unsigned int nr = 0;
+ unsigned int nr = 0, i, j;
+ uint32_t low_mem_end = hvm_info->low_mem_pgend << PAGE_SHIFT;
+ uint32_t add_high_mem = 0;
+ uint64_t high_mem_end = (uint64_t)hvm_info->high_mem_pgend << PAGE_SHIFT;
+ uint64_t map_start, map_size, map_end;
if ( !lowmem_reserved_base )
lowmem_reserved_base = 0xA0000;
@@ -149,13 +153,6 @@ int build_e820_table(struct e820entry *e820,
e820[nr].type = E820_RESERVED;
nr++;
- /* Low RAM goes here. Reserve space for special pages. */
- BUG_ON((hvm_info->low_mem_pgend << PAGE_SHIFT) < (2u << 20));
- e820[nr].addr = 0x100000;
- e820[nr].size = (hvm_info->low_mem_pgend << PAGE_SHIFT) - e820[nr].addr;
- e820[nr].type = E820_RAM;
- nr++;
-
/*
* Explicitly reserve space for special pages.
* This space starts at RESERVED_MEMBASE an extends to cover various
@@ -191,16 +188,102 @@ int build_e820_table(struct e820entry *e820,
nr++;
}
+ /* Low RAM goes here. Reserve space for special pages. */
+ BUG_ON(low_mem_end < (2u << 20));
- if ( hvm_info->high_mem_pgend )
+ /*
+ * Construct E820 table according to recorded memory map.
+ *
+ * The memory map created by toolstack may include,
+ *
+ * #1. Low memory region
+ *
+ * Low RAM starts at least from 1M to make sure all standard regions
+ * of the PC memory map, like BIOS, VGA memory-mapped I/O and vgabios,
+ * have enough space.
+ *
+ * #2. Reserved regions if they exist
+ *
+ * #3. High memory region if it exists
+ *
+ * Note we just have one low memory entry and one high mmeory entry if
+ * exists.
+ *
+ * But we may have relocated RAM to allocate sufficient MMIO previously
+ * so low_mem_pgend would be changed over there. And here memory_map[]
+ * records the original low/high memory, so if low_mem_end is less than
+ * the original we need to revise low/high memory range firstly.
+ */
+ for ( i = 0; i < memory_map.nr_map; i++ )
{
- e820[nr].addr = ((uint64_t)1 << 32);
- e820[nr].size =
- ((uint64_t)hvm_info->high_mem_pgend << PAGE_SHIFT) - e820[nr].addr;
- e820[nr].type = E820_RAM;
+ map_start = memory_map.map[i].addr;
+ map_size = memory_map.map[i].size;
+ map_end = map_start + map_size;
+
+ /* If we need to adjust lowmem. */
+ if ( memory_map.map[i].type == E820_RAM &&
+ low_mem_end > map_start && low_mem_end < map_end )
+ {
+ add_high_mem = map_end - low_mem_end;
+ memory_map.map[i].size = low_mem_end - map_start;
+ break;
+ }
+ }
+
+ /* If we need to adjust highmem. */
+ if ( add_high_mem )
+ {
+ /* Modify the existing highmem region if it exists. */
+ for ( i = 0; i < memory_map.nr_map; i++ )
+ {
+ map_start = memory_map.map[i].addr;
+ map_size = memory_map.map[i].size;
+ map_end = map_start + map_size;
+
+ if ( memory_map.map[i].type == E820_RAM &&
+ map_start == ((uint64_t)1 << 32))
+ {
+ memory_map.map[i].size += add_high_mem;
+ break;
+ }
+ }
+
+ /* If there was no highmem region, just create one. */
+ if ( i == memory_map.nr_map )
+ {
+ memory_map.map[i].addr = ((uint64_t)1 << 32);
+ memory_map.map[i].size = add_high_mem;
+ memory_map.map[i].type = E820_RAM;
+ memory_map.nr_map++;
+ }
+
+ /* A sanity check if high memory is broken. */
+ BUG_ON( high_mem_end !=
+ memory_map.map[i].addr + memory_map.map[i].size);
+ }
+
+ /* Now fill e820. */
+ for ( i = 0; i < memory_map.nr_map; i++ )
+ {
+ e820[nr] = memory_map.map[i];
nr++;
}
+ /* Finally we need to sort all e820 entries. */
+ for ( j = 0; j < nr - 1; j++ )
+ {
+ for ( i = j + 1; i < nr; i++ )
+ {
+ if ( e820[j].addr > e820[i].addr )
+ {
+ struct e820entry tmp = e820[j];
+
+ e820[j] = e820[i];
+ e820[i] = tmp;
+ }
+ }
+ }
+
return nr;
}
--
generated by git-patchbot for /home/xen/git/xen.git#master
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |