|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen master] xen/arm: Divide GIC initialization in 2 parts
commit ae2a9d274fbada625442adcd6b79f953561e94dc
Author: Julien Grall <julien.grall@xxxxxxxxxx>
AuthorDate: Wed Apr 1 17:21:34 2015 +0100
Commit: Ian Campbell <ian.campbell@xxxxxxxxxx>
CommitDate: Thu Apr 2 10:42:34 2015 +0100
xen/arm: Divide GIC initialization in 2 parts
Currently the function to translate IRQ from the device tree is set
unconditionally to be able to be able to retrieve serial/timer IRQ before
the
GIC has been initialized.
It assumes that the xlate function won't ever changed. We may also need to
have the primary interrupt controller very early.
Rework the gic initialization in 2 parts:
- gic_preinit: Get the interrupt controller device tree node and set
up GIC and xlate callbacks
- gic_init: Initialize the interrupt controller and the boot CPU
interrupts.
The former function will be called just after the IRQ subsystem as been
initialized.
Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>
Acked-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
Cc: Frediano Ziglio <frediano.ziglio@xxxxxxxxxx>
Cc: Zoltan Kiss <zoltan.kiss@xxxxxxxxxx>
---
xen/arch/arm/gic-v2.c | 70 ++++++++++++++++++++++--------------------
xen/arch/arm/gic-v3.c | 75 +++++++++++++++++++++++---------------------
xen/arch/arm/gic.c | 16 ++++++++-
xen/arch/arm/setup.c | 3 +-
xen/include/asm-arm/gic.h | 8 +++++
5 files changed, 100 insertions(+), 72 deletions(-)
diff --git a/xen/arch/arm/gic-v2.c b/xen/arch/arm/gic-v2.c
index 20cdbc9..3be4ad6 100644
--- a/xen/arch/arm/gic-v2.c
+++ b/xen/arch/arm/gic-v2.c
@@ -674,37 +674,10 @@ static hw_irq_controller gicv2_guest_irq_type = {
.set_affinity = gicv2_irq_set_affinity,
};
-const static struct gic_hw_operations gicv2_ops = {
- .info = &gicv2_info,
- .secondary_init = gicv2_secondary_cpu_init,
- .save_state = gicv2_save_state,
- .restore_state = gicv2_restore_state,
- .dump_state = gicv2_dump_state,
- .gicv_setup = gicv2v_setup,
- .gic_host_irq_type = &gicv2_host_irq_type,
- .gic_guest_irq_type = &gicv2_guest_irq_type,
- .eoi_irq = gicv2_eoi_irq,
- .deactivate_irq = gicv2_dir_irq,
- .read_irq = gicv2_read_irq,
- .set_irq_properties = gicv2_set_irq_properties,
- .send_SGI = gicv2_send_SGI,
- .disable_interface = gicv2_disable_interface,
- .update_lr = gicv2_update_lr,
- .update_hcr_status = gicv2_hcr_status,
- .clear_lr = gicv2_clear_lr,
- .read_lr = gicv2_read_lr,
- .write_lr = gicv2_write_lr,
- .read_vmcr_priority = gicv2_read_vmcr_priority,
- .read_apr = gicv2_read_apr,
- .make_dt_node = gicv2_make_dt_node,
-};
-
-/* Set up the GIC */
-static int __init gicv2_init(struct dt_device_node *node, const void *data)
+static int __init gicv2_init(void)
{
int res;
-
- dt_device_set_used_by(node, DOMID_XEN);
+ const struct dt_device_node *node = gicv2_info.node;
res = dt_device_get_address(node, 0, &gicv2.dbase, NULL);
if ( res || !gicv2.dbase || (gicv2.dbase & ~PAGE_MASK) )
@@ -727,9 +700,6 @@ static int __init gicv2_init(struct dt_device_node *node,
const void *data)
panic("GICv2: Cannot find the maintenance IRQ");
gicv2_info.maintenance_irq = res;
- /* Set the GIC as the primary interrupt controller */
- dt_interrupt_controller = node;
-
/* TODO: Add check on distributor, cpu size */
printk("GICv2 initialization:\n"
@@ -774,8 +744,42 @@ static int __init gicv2_init(struct dt_device_node *node,
const void *data)
spin_unlock(&gicv2.lock);
+ return 0;
+}
+
+const static struct gic_hw_operations gicv2_ops = {
+ .info = &gicv2_info,
+ .init = gicv2_init,
+ .secondary_init = gicv2_secondary_cpu_init,
+ .save_state = gicv2_save_state,
+ .restore_state = gicv2_restore_state,
+ .dump_state = gicv2_dump_state,
+ .gicv_setup = gicv2v_setup,
+ .gic_host_irq_type = &gicv2_host_irq_type,
+ .gic_guest_irq_type = &gicv2_guest_irq_type,
+ .eoi_irq = gicv2_eoi_irq,
+ .deactivate_irq = gicv2_dir_irq,
+ .read_irq = gicv2_read_irq,
+ .set_irq_properties = gicv2_set_irq_properties,
+ .send_SGI = gicv2_send_SGI,
+ .disable_interface = gicv2_disable_interface,
+ .update_lr = gicv2_update_lr,
+ .update_hcr_status = gicv2_hcr_status,
+ .clear_lr = gicv2_clear_lr,
+ .read_lr = gicv2_read_lr,
+ .write_lr = gicv2_write_lr,
+ .read_vmcr_priority = gicv2_read_vmcr_priority,
+ .read_apr = gicv2_read_apr,
+ .make_dt_node = gicv2_make_dt_node,
+};
+
+/* Set up the GIC */
+static int __init gicv2_preinit(struct dt_device_node *node, const void *data)
+{
gicv2_info.hw_version = GIC_V2;
+ gicv2_info.node = node;
register_gic_ops(&gicv2_ops);
+ dt_irq_xlate = gic_irq_xlate;
return 0;
}
@@ -788,7 +792,7 @@ static const struct dt_device_match gicv2_dt_match[]
__initconst =
DT_DEVICE_START(gicv2, "GICv2", DEVICE_GIC)
.dt_match = gicv2_dt_match,
- .init = gicv2_init,
+ .init = gicv2_preinit,
DT_DEVICE_END
/*
diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c
index ab80670..48772f1 100644
--- a/xen/arch/arm/gic-v3.c
+++ b/xen/arch/arm/gic-v3.c
@@ -1173,31 +1173,6 @@ static const hw_irq_controller gicv3_guest_irq_type = {
.set_affinity = gicv3_irq_set_affinity,
};
-static const struct gic_hw_operations gicv3_ops = {
- .info = &gicv3_info,
- .save_state = gicv3_save_state,
- .restore_state = gicv3_restore_state,
- .dump_state = gicv3_dump_state,
- .gicv_setup = gicv_v3_init,
- .gic_host_irq_type = &gicv3_host_irq_type,
- .gic_guest_irq_type = &gicv3_guest_irq_type,
- .eoi_irq = gicv3_eoi_irq,
- .deactivate_irq = gicv3_dir_irq,
- .read_irq = gicv3_read_irq,
- .set_irq_properties = gicv3_set_irq_properties,
- .send_SGI = gicv3_send_sgi,
- .disable_interface = gicv3_disable_interface,
- .update_lr = gicv3_update_lr,
- .update_hcr_status = gicv3_hcr_status,
- .clear_lr = gicv3_clear_lr,
- .read_lr = gicv3_read_lr,
- .write_lr = gicv3_write_lr,
- .read_vmcr_priority = gicv3_read_vmcr_priority,
- .read_apr = gicv3_read_apr,
- .secondary_init = gicv3_secondary_cpu_init,
- .make_dt_node = gicv3_make_dt_node,
-};
-
static int __init cmp_rdist(const void *a, const void *b)
{
const struct rdist_region *l = a, *r = a;
@@ -1207,11 +1182,12 @@ static int __init cmp_rdist(const void *a, const void
*b)
}
/* Set up the GIC */
-static int __init gicv3_init(struct dt_device_node *node, const void *data)
+static int __init gicv3_init(void)
{
struct rdist_region *rdist_regs;
int res, i;
uint32_t reg;
+ const struct dt_device_node *node = gicv3_info.node;
if ( !cpu_has_gicv3 )
{
@@ -1219,8 +1195,6 @@ static int __init gicv3_init(struct dt_device_node *node,
const void *data)
return -ENODEV;
}
- dt_device_set_used_by(node, DOMID_XEN);
-
res = dt_device_get_address(node, 0, &gicv3.dbase, &gicv3.dbase_size);
if ( res || !gicv3.dbase )
panic("GICv3: Cannot find a valid distributor address");
@@ -1274,9 +1248,6 @@ static int __init gicv3_init(struct dt_device_node *node,
const void *data)
panic("GICv3: Cannot find the maintenance IRQ");
gicv3_info.maintenance_irq = res;
- /* Set the GIC as the primary interrupt controller */
- dt_interrupt_controller = node;
-
for ( i = 0; i < gicv3.rdist_count; i++ )
{
/* map dbase & rdist regions */
@@ -1311,15 +1282,47 @@ static int __init gicv3_init(struct dt_device_node
*node, const void *data)
res = gicv3_cpu_init();
gicv3_hyp_init();
- gicv3_info.hw_version = GIC_V3;
- /* Register hw ops*/
- register_gic_ops(&gicv3_ops);
-
spin_unlock(&gicv3.lock);
return res;
}
+static const struct gic_hw_operations gicv3_ops = {
+ .info = &gicv3_info,
+ .init = gicv3_init,
+ .save_state = gicv3_save_state,
+ .restore_state = gicv3_restore_state,
+ .dump_state = gicv3_dump_state,
+ .gicv_setup = gicv_v3_init,
+ .gic_host_irq_type = &gicv3_host_irq_type,
+ .gic_guest_irq_type = &gicv3_guest_irq_type,
+ .eoi_irq = gicv3_eoi_irq,
+ .deactivate_irq = gicv3_dir_irq,
+ .read_irq = gicv3_read_irq,
+ .set_irq_properties = gicv3_set_irq_properties,
+ .send_SGI = gicv3_send_sgi,
+ .disable_interface = gicv3_disable_interface,
+ .update_lr = gicv3_update_lr,
+ .update_hcr_status = gicv3_hcr_status,
+ .clear_lr = gicv3_clear_lr,
+ .read_lr = gicv3_read_lr,
+ .write_lr = gicv3_write_lr,
+ .read_vmcr_priority = gicv3_read_vmcr_priority,
+ .read_apr = gicv3_read_apr,
+ .secondary_init = gicv3_secondary_cpu_init,
+ .make_dt_node = gicv3_make_dt_node,
+};
+
+static int __init gicv3_preinit(struct dt_device_node *node, const void *data)
+{
+ gicv3_info.hw_version = GIC_V3;
+ gicv3_info.node = node;
+ register_gic_ops(&gicv3_ops);
+ dt_irq_xlate = gic_irq_xlate;
+
+ return 0;
+}
+
static const struct dt_device_match gicv3_dt_match[] __initconst =
{
DT_MATCH_GIC_V3,
@@ -1328,7 +1331,7 @@ static const struct dt_device_match gicv3_dt_match[]
__initconst =
DT_DEVICE_START(gicv3, "GICv3", DEVICE_GIC)
.dt_match = gicv3_dt_match,
- .init = gicv3_init,
+ .init = gicv3_preinit,
DT_DEVICE_END
/*
diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
index 940fb8e..8e7f24b 100644
--- a/xen/arch/arm/gic.c
+++ b/xen/arch/arm/gic.c
@@ -163,8 +163,10 @@ int gic_irq_xlate(const u32 *intspec, unsigned int intsize,
return 0;
}
-/* Set up the GIC */
-void __init gic_init(void)
+/* Find the interrupt controller and set up the callback to translate
+ * device tree IRQ.
+ */
+void __init gic_preinit(void)
{
int rc;
struct dt_device_node *node;
@@ -189,6 +191,16 @@ void __init gic_init(void)
if ( !num_gics )
panic("Unable to find compatible GIC in the device tree");
+ /* Set the GIC as the primary interrupt controller */
+ dt_interrupt_controller = node;
+ dt_device_set_used_by(node, DOMID_XEN);
+}
+
+/* Set up the GIC */
+void __init gic_init(void)
+{
+ if ( gic_hw_ops->init() )
+ panic("Failed to initialize the GIC drivers");
/* Clear LR mask for cpu0 */
clear_cpu_lr_mask();
}
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index b905c9f..4f05f57 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -752,7 +752,6 @@ void __init start_xen(unsigned long boot_phys_offset,
vm_init();
dt_unflatten_host_device_tree();
- dt_irq_xlate = gic_irq_xlate;
init_IRQ();
@@ -760,6 +759,8 @@ void __init start_xen(unsigned long boot_phys_offset,
preinit_xen_time();
+ gic_preinit();
+
dt_uart_init();
console_init_preirq();
console_init_ring();
diff --git a/xen/include/asm-arm/gic.h b/xen/include/asm-arm/gic.h
index 89a9b6f..b16f98e 100644
--- a/xen/include/asm-arm/gic.h
+++ b/xen/include/asm-arm/gic.h
@@ -232,6 +232,10 @@ extern void gic_remove_from_queues(struct vcpu *v,
unsigned int virtual_irq);
/* Accept an interrupt from the GIC and dispatch its handler */
extern void gic_interrupt(struct cpu_user_regs *regs, int is_fiq);
+/* Find the interrupt controller and set up the callback to translate
+ * device tree IRQ.
+ */
+extern void gic_preinit(void);
/* Bring up the interrupt controller, and report # cpus attached */
extern void gic_init(void);
/* Bring up a secondary CPU's per-CPU GIC interface */
@@ -284,11 +288,15 @@ struct gic_info {
uint8_t nr_lrs;
/* Maintenance irq number */
unsigned int maintenance_irq;
+ /* Pointer to the device tree node representing the interrupt controller */
+ const struct dt_device_node *node;
};
struct gic_hw_operations {
/* Hold GIC HW information */
const struct gic_info *info;
+ /* Initialize the GIC and the boot CPU */
+ int (*init)(void);
/* Save GIC registers */
void (*save_state)(struct vcpu *);
/* Restore GIC registers */
--
generated by git-patchbot for /home/xen/git/xen.git#master
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |