|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-bugs] [Bug 190] Kernel BUG at "drivers/xen/blkfront/blkfront.c":95
http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=190 dbarrera@xxxxxxxxxx changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|x86_64 - Kernel BUG at |Kernel BUG at |"drivers/xen/blkfront/blkfro|"drivers/xen/blkfront/blkfro |nt.c":95 |nt.c":95 ------- Additional Comments From dbarrera@xxxxxxxxxx 2005-08-26 17:23 ------- I am actually seeing this crash on x86, too. I am running the LTP test suite on both Dom0 and DomU, and the guest domains crashes. This latest crash happened on an x86 FC3 box. HW: IBM ThinkCentre, IDE drive, 1GB RAM, IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) Ethernet controller: Intel Corp. 82541EI Gigabit Ethernet Controller (Copper) tail of 'xm log': [2005-08-26 10:59:00 xend] DEBUG (__init__:988) XendDomain>reap> domain died name=Sles9-SP1 id=1 [2005-08-26 10:59:00 xend] INFO (__init__:988) Destroying domain: name=Sles9-SP1[2005-08-26 10:59:00 xend] INFO (__init__:988) DBMap>releaseDomain> 1 [2005-08-26 10:59:00 xend] INFO (__init__:988) EVENT> xend.domain.destroy ['Sles9-SP1', 1] [2005-08-26 10:59:00 xend] INFO (__init__:988) EVENT> xend.domain.exit ['Sles9-SP1', 1, 'crash'] [2005-08-26 10:59:00 xend] INFO (__init__:988) EVENT> xend.virq 3 [2005-08-26 10:59:01 xend] INFO (__init__:988) EVENT> xend.virq 3 domU console:kernel BUG at drivers/xen/blkfront/blkfront.c:95 (GET_ID_FROM_FREELIST)! Ä<c0256bc2>Ü blkif_queue_request+0x2b2/0x310 Ä<c02c442e>Ü schedule+0x3de/0x770 xm dmesg:[root@thinkcentre-dom0 xentest-proven]# xm dmesg __ __ _____ ___ _ _ \ \/ /___ _ __ |___ / / _ \ __| | _____ _____| | \ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ | / \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ | /_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_| http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.0-devel (root@) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) Fri Aug 26 08:30:53 CDT 2005 Latest ChangeSet: Fri Aug 26 08:06:49 2005 2b95125015a59eeb086b3748f9415ac440133b4d (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009f800 (usable) (XEN) 000000000009f800 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000003f770000 (usable) (XEN) 000000003f770000 - 000000003f77a000 (ACPI data) (XEN) 000000003f77a000 - 000000003f780000 (ACPI NVS) (XEN) 000000003f780000 - 0000000040000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ff800000 - 0000000100000000 (reserved) (XEN) System RAM: 1015MB (1039420kB) (XEN) Xen heap: 10MB (10632kB) (XEN) PAE enabled, limit: 16 GB (XEN) found SMP MP-table at 000f63f0 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: RSDP (v000 PTLTD ) @ 0x000f64a0 (XEN) ACPI: RSDT (v001 PTLTD RSDT 0x060400d0 LTP 0x00000000) @ 0x3f7750bd (XEN) ACPI: FADT (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @ 0x3f779e93 (XEN) ACPI: TCPA (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @ 0x3f779f07 (XEN) ACPI: MADT (v001 PTLTD APIC 0x060400d0 LTP 0x00000000) @ 0x3f779f39(XEN) ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x060400d0 LTP 0x00000001) @ 0x3f779fa1 (XEN) ACPI: SSDT (v001 PTLTD ACPIHT 0x060400d0 LTP 0x00000001) @ 0x3f779fc9 (XEN) ACPI: DSDT (v001 IBM THINKCEN 0x060400d0 MSFT 0x0100000e) @ 0x00000000 (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 15:3 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 15:3 APIC version 20 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Initializing CPU#0 (XEN) Detected 2992.614 MHz processor. (XEN) Using scheduler: Simple EDF Scheduler (sedf) (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 (XEN) Booting processor 1/1 eip 90000 (XEN) Initializing CPU#1 (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1 (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer is 1.193MHz PIT (XEN) Brought up 2 CPUs (XEN) mtrr: v2.0 (20020519) (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=yes,LOADER=generic' (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000001800000->0000000002000000 (61952 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c0618de4 (XEN) Init. ramdisk: c0619000->c06af000 (XEN) Phys-Mach map: c06af000->c06ed800 (XEN) Page tables: c06ee000->c06f7000 (XEN) Start info: c06f7000->c06f8000 (XEN) Boot stack: c06f8000->c06f9000 (XEN) TOTAL: c0000000->c0800000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Initrd len 0x96000, start at 0xc0619000 (XEN) Scrubbing Free RAM: ...........done. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). (XEN) DOM1: (file=mm.c, line=461) Non-privileged attempt to map I/O space 00000000 (XEN) DOM1: (file=mm.c, line=461) Non-privileged attempt to map I/O space 000000c0 (XEN) DOM1: (file=mm.c, line=461) Non-privileged attempt to map I/O space 0000009f (XEN) DOM1: (file=mm.c, line=461) Non-privileged attempt to map I/O space 00000000 (XEN) DOM1: (file=mm.c, line=461) Non-privileged attempt to map I/O space 000000c0 (XEN) DOM1: (file=mm.c, line=461) Non-privileged attempt to map I/O space 0000009f (XEN) DOM1: (file=mm.c, line=461) Non-privileged attempt to map I/O space 00000000 (XEN) DOM1: (file=mm.c, line=461) Non-privileged attempt to map I/O space 000000c0 (XEN) DOM1: (file=mm.c, line=461) Non-privileged attempt to map I/O space 0000009f (XEN) DOM1: (file=mm.c, line=461) Non-privileged attempt to map I/O space 00000000 (XEN) DOM1: (file=mm.c, line=461) Non-privileged attempt to map I/O space 000000c0 (XEN) DOM1: (file=mm.c, line=461) Non-privileged attempt to map I/O space 0000009f dom0 dmesg: (the swap stuff is LTP related; it is OK). Linux version 2.6.12-xen0 (root@thinkcentre-dom0) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #2 Fri Aug 26 09:20:29 CDT 2005 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000fa00000 (usable) 0MB HIGHMEM available. 250MB LOWMEM available. On node 0 totalpages: 64000 DMA zone: 64000 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 found SMP MP-table at 000f63f0 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f64a0 ACPI: RSDT (v001 PTLTD RSDT 0x060400d0 LTP 0x00000000) @ 0x3f7750bd ACPI: FADT (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @ 0x3f779e93 ACPI: TCPA (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @ 0x3f779f07 ACPI: MADT (v001 PTLTD APIC 0x060400d0 LTP 0x00000000) @ 0x3f779f39ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x060400d0 LTP 0x00000001) @ 0x3f779fa1 ACPI: SSDT (v001 PTLTD ACPIHT 0x060400d0 LTP 0x00000001) @ 0x3f779fc9 ACPI: DSDT (v001 IBM THINKCEN 0x060400d0 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information IRQ lockup detection disabled Allocating PCI resources starting at 0fa00000 (gap: 0fa00000:f0600000) Built 1 zonelists Kernel command line: root=/dev/hda1 ro console=tty0 Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Xen reported: 2992.614 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) vmalloc area: d0800000-f53fe000, maxmem 2d800000 Memory: 247040k/256000k available (3554k kernel code, 8848k reserved, 1031k data, 352k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 5976.88 BogoMIPS (lpj=29884416) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: After all inits, caps: bfebd3f1 00000000 00000000 00000080 0000441d 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... disabled ENABLING IO-APIC IRQs checking if image is initramfs... it is Freeing initrd memory: 600k freed NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12 14 15) xen_mem: Initialising balloon driver. SCSI subsystem initialized usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Grant table initialized IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx> Simple Boot Flag at 0x35 set to 0x1 Initializing Cryptographic API serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 2.6.6) Intel(R) PRO/1000 Network Driver - version 6.0.54-k2 Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 16 (level, low) -> IRQ 16 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection pcnet32.c:v1.30j 29.04.2005 tsbogend@xxxxxxxxxxxxxxxx e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> Xen virtual console successfully installed as ttyS0 Event-channel device installed. Initialising Xen netif backend Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6Y080L0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-ST RW/DVD GCC-4481B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: 156312576 sectors (80032 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 > hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Red Hat/Adaptec aacraid driver (1.1.2-lk2 Aug 26 2005) 3ware Storage Controller device driver for Linux v1.26.02.001. libata version 1.11 loaded. Fusion MPT base driver 3.01.20 Copyright (c) 1999-2004 LSI Logic Corporation Fusion MPT SCSI Host driver 3.01.20 usbmon: debugs is not available ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 1347.200 MB/sec raid5: using function: pIII_sse (1347.200 MB/sec) md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 17 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 Bridge firewalling registered Freeing unused kernel memory: 352k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ACPI: Power Button (FF) [PWRF] ibm_acpi: ec object not found ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (67 C) EXT3 FS on hda1, internal journal cdrom: open failed. Adding 1052248k swap on /dev/hda2. Priority:-1 extents:1 e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex store_evtchn = 16 XENBUS xs_read_watch: 0 device vif0.0 entered promiscuous mode bridge: can't decode speed from peth0: 65535 device peth0 entered promiscuous mode xen-br0: port 1(vif0.0) entering learning state xen-br0: topology change detected, propagating xen-br0: port 1(vif0.0) entering forwarding state e1000: peth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex xen-br0: port 2(peth0) entering learning state xen-br0: topology change detected, propagating xen-br0: port 2(peth0) entering forwarding state device vif1.0 entered promiscuous mode xen-br0: port 3(vif1.0) entering learning state xen-br0: topology change detected, propagating xen-br0: port 3(vif1.0) entering forwarding state Adding 65528k swap on ./swapfile01. Priority:-2 extents:30 Adding 65528k swap on ./swapfile01. Priority:-3 extents:95 Adding 65528k swap on ./swapfile01. Priority:-4 extents:107 Unable to find swap-space signature Adding 32k swap on swapfile02. Priority:-5 extents:1 Adding 32k swap on swapfile03. Priority:-6 extents:1 Adding 32k swap on swapfile04. Priority:-7 extents:1 Adding 32k swap on swapfile05. Priority:-8 extents:1 Adding 32k swap on swapfile06. Priority:-9 extents:2 Adding 32k swap on swapfile07. Priority:-10 extents:1 Adding 32k swap on swapfile08. Priority:-11 extents:1 Adding 32k swap on swapfile09. Priority:-12 extents:1 Adding 32k swap on swapfile10. Priority:-13 extents:2 Adding 32k swap on swapfile11. Priority:-14 extents:1 Adding 32k swap on swapfile12. Priority:-15 extents:1 Adding 32k swap on swapfile13. Priority:-16 extents:1 Adding 32k swap on swapfile14. Priority:-17 extents:1 Adding 32k swap on swapfile15. Priority:-18 extents:1 Adding 32k swap on swapfile16. Priority:-19 extents:1 Adding 32k swap on swapfile17. Priority:-20 extents:1 Adding 32k swap on swapfile18. Priority:-21 extents:1 Adding 32k swap on swapfile19. Priority:-22 extents:2 Adding 32k swap on swapfile20. Priority:-23 extents:1 Adding 32k swap on swapfile21. Priority:-24 extents:1 Adding 32k swap on swapfile22. Priority:-25 extents:1 Adding 32k swap on swapfile23. Priority:-26 extents:1 Adding 32k swap on swapfile24. Priority:-27 extents:1 Adding 32k swap on swapfile25. Priority:-28 extents:1 Adding 32k swap on swapfile26. Priority:-29 extents:1 Adding 32k swap on swapfile27. Priority:-30 extents:1 Adding 32k swap on swapfile28. Priority:-31 extents:1 Adding 32k swap on swapfile29. Priority:-32 extents:1 Adding 32k swap on swapfile30. Priority:-33 extents:1 Adding 32k swap on swapfile31. Priority:-34 extents:1 Adding 32k swap on swapfile32. Priority:-35 extents:1 xen-br0: port 3(vif1.0) entering disabled state device vif1.0 left promiscuous mode xen-br0: port 3(vif1.0) entering disabled state -- Configure bugmail: http://bugzilla.xensource.com/bugzilla/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. _______________________________________________ Xen-bugs mailing list Xen-bugs@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-bugs
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |