|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-API] Compiling xen-api on Debian Wheezy AMD64
There were only 2 .omake* files in the xen-api folder. I deleted them and still
get the error. Are there other locations for these files I need to clean?
I renamed ocamlopt so there is only ocamlopt.opt in the path.
sjodh@REDBLD-XS:~/src/netscaler/xen-api$ make
omake -j 8 phase1
omake: Symbol `FamErrlist' has different size in shared object, consider
re-linking
*** omake: reading OMakefiles
*** omake: finished reading OMakefiles (0.12 sec)
--- Checking for ocamlfind... (found
/shared/home/sjodh/.opam/system/bin/ocamlfind)
--- Checking for ocamlc.opt... (found /usr/bin/ocamlc.opt)
--- Checking for ocamlopt.opt... (found /usr/bin/ocamlopt.opt)
--- Checking whether ocamlc understands the "z" warnings... (yes)
*** omake: 149/277 targets are up to date
*** omake: failed (0.23 sec, 20/20 scans, 4/5 rules, 76/281 digests)
*** omake: targets were not rebuilt because of errors:
ocaml/database/string_marshall_helper.cmi
depends on: ocaml/database/string_marshall_helper.ml
ocaml/database/string_marshall_helper.cmx
depends on: ocaml/database/string_marshall_helper.ml
ocaml/database/string_marshall_helper.o
depends on: ocaml/database/string_marshall_helper.ml
make: *** [all] Error 127
> -----Original Message-----
> From: Dave Scott
> Sent: Friday, April 26, 2013 12:57 PM
> To: Jonathan Ludlam
> Cc: Santosh Jodh; Anil Madhavapeddy; xen-api@xxxxxxxxxxxxx
> Subject: Re: [Xen-API] Compiling xen-api on Debian Wheezy AMD64
>
> Ah good point. Iirc Omake caches the compiler when you first run it.
> Try removing all .omake* files to see if it picks up the opt.opt?
>
> --
> Dave Scott
> XenServer System Architect
>
> On Apr 26, 2013, at 8:52 PM, "Jonathan Ludlam"
> <Jonathan.Ludlam@xxxxxxxxxxxxx> wrote:
>
> > I'm still suspicious that it's using the byte code compilers. I've
> just tried here and when I compile datamodel.ml with ocamlopt.opt
> (native compiler) it's ok, and when I use ocamlopt (bytecode) I, too,
> get stack overflow.
> >
> > Try verifying with ps to see which compiler it's using?
> >
> > Jon
> >
> > Sent from my iPad
> >
> > On 26 Apr 2013, at 20:48, "Santosh Jodh" <Santosh.Jodh@xxxxxxxxxx>
> wrote:
> >
> >> I guess the unit is kb.
> >>
> >> So it is 16MB and that's the highest it can go.
> >> sjodh@REDBLD-XS:~/src/netscaler/xen-api$ ulimit -s
> >> 16384
> >>
> >> -bash: ulimit: stack size: cannot modify limit: Operation not
> >> permitted sjodh@REDBLD-XS:~/src/netscaler/xen-api$ ulimit -s 32384
> >>
> >>> -----Original Message-----
> >>> From: Dave Scott
> >>> Sent: Friday, April 26, 2013 12:45 PM
> >>> To: Santosh Jodh
> >>> Cc: Anil Madhavapeddy; Jonathan Ludlam; xen-api@xxxxxxxxxxxxx
> >>> Subject: Re: [Xen-API] Compiling xen-api on Debian Wheezy AMD64
> >>>
> >>> 16k seems a little small to me. According to Wikipedia the basic
> >>> interpreter on the 48k ZX spectrum could recurse 13792 frames deep.
> >>> I'm sure we could live with a 10 MiB stack (IIRC that's what we
> >>> currently have, per thread, in XCP/XS dom0) :-)
> >>>
> >>> When I'm back at a proper computer I'll have a look at my default
> >>> stack (on mobile device atm)
> >>>
> >>> --
> >>> Dave Scott
> >>> XenServer System Architect
> >>>
> >>> On Apr 26, 2013, at 8:13 PM, "Santosh Jodh"
> >>> <Santosh.Jodh@xxxxxxxxxx>
> >>> wrote:
> >>>
> >>>> I doubled it to 16k and it still fails.
> >>>>
> >>>> -----Original Message-----
> >>>> From: Anil Madhavapeddy [mailto:anil@xxxxxxxxxx]
> >>>> Sent: Friday, April 26, 2013 11:16 AM
> >>>> To: Jonathan Ludlam
> >>>> Cc: Santosh Jodh; xen-api@xxxxxxxxxxxxx
> >>>> Subject: Re: [Xen-API] Compiling xen-api on Debian Wheezy AMD64
> >>>>
> >>>> Santosh,
> >>>>
> >>>> If you're getting a stack overflow exception, it's probably worth
> >>> increasing your ulimit -s and trying again...
> >>>>
> >>>> -anil
> >>>>
> >>>> On 26 Apr 2013, at 19:06, Jonathan Ludlam
> >>> <Jonathan.Ludlam@xxxxxxxxxxxxx> wrote:
> >>>>
> >>>>> Although it does seem to have found ocamlopt.opt - odd. Hmm.
> >>>>>
> >>>>> Sent from my iPad
> >>>>>
> >>>>> On 26 Apr 2013, at 18:52, "Santosh Jodh"
> <Santosh.Jodh@xxxxxxxxxx>
> >>> wrote:
> >>>>>
> >>>>>> Ok - I misunderstood you when you said each repo has several
> >>> branches.
> >>>>>>
> >>>>>> I get following on fusion branch:
> >>>>>> sjodh@REDBLD-XS:~/src/netscaler/xen-api$ git branch -l
> >>>>>> * fusion
> >>>>>> master
> >>>>>>
> >>>>>> sjodh@REDBLD-XS:~/src/netscaler/xen-api$ make omake -j 8 phase1
> >>>>>> omake: Symbol `FamErrlist' has different size in shared object,
> >>>>>> consider re-linking
> >>>>>> *** omake: reading OMakefiles
> >>>>>> *** omake: finished reading OMakefiles (0.17 sec)
> >>>>>> --- Checking for ocamlfind... (found
> >>>>>> /shared/home/sjodh/.opam/system/bin/ocamlfind)
> >>>>>> --- Checking for ocamlc.opt... (found /usr/bin/ocamlc.opt)
> >>>>>> --- Checking for ocamlopt.opt... (found /usr/bin/ocamlopt.opt)
> >>>>>> --- Checking whether ocamlc understands the "z" warnings...
> (yes)
> >>>>>> - build ocaml/idl datamodel.cmx
> >>>>>> + ocamlfind ocamlopt -package
> >>>>>> + xml-light2,sexpr,log,rpclib,http-svr,uuid -g -dtypes -thread
> >>>>>> + -warn-error +a-4-6-9-27-28-29 -ccopt -fPIC -I ocaml_backend -I
> >>>>>> + ../database -I .. -c datamodel.ml
> >>>>>> Fatal error: exception Stack_overflow
> >>>>>> *** omake: 223/277 targets are up to date
> >>>>>> *** omake: failed (32.08 sec, 38/38 scans, 29/61 rules, 133/396
> >>>>>> digests)
> >>>>>> *** omake: targets were not rebuilt because of errors:
> >>>>>> ocaml/idl/datamodel.cmi
> >>>>>> depends on: ocaml/idl/datamodel.ml ocaml/idl/datamodel.cmx
> >>>>>> depends on: ocaml/idl/datamodel.ml ocaml/idl/datamodel.o
> >>>>>> depends on: ocaml/idl/datamodel.ml
> >>>>>> make: *** [all] Error 2
> >>>>>>
> >>>>>> -----Original Message-----
> >>>>>> From: Dave Scott
> >>>>>> Sent: Friday, April 26, 2013 10:13 AM
> >>>>>> To: Santosh Jodh
> >>>>>> Cc: Anil Madhavapeddy; John Else; xen-api@xxxxxxxxxxxxx
> >>>>>> Subject: Re: [Xen-API] Compiling xen-api on Debian Wheezy AMD64
> >>>>>>
> >>>>>>
> >>>>>> I didn't read your email carefully enough, see below:
> >>>>>>
> >>>>>> On 26/04/13 18:02, Santosh Jodh wrote:
> >>>>>>> sjodh@REDBLD-XS:~/src/netscaler/xen-api$ git checkout fusion
> >>>>>>> error: pathspec 'fusion' did not match any file(s) known to
> git.
> >>>>>>>
> >>>>>>> sjodh@REDBLD-XS:~/src/netscaler/xen-api$ more .git/config
> [core]
> >>>>>>> repositoryformatversion = 0
> >>>>>>> filemode = true
> >>>>>>> bare = false
> >>>>>>> logallrefupdates = true
> >>>>>>> [remote "origin"]
> >>>>>>> fetch = +refs/heads/*:refs/remotes/origin/*
> >>>>>>> url = git://github.com/xen-org/xen-api.git
> >>>>>>
> >>>>>> this is xen-org/xen-api.git not jonludlam/xen-api.git
> >>>>>>
> >>>>>>> [branch "master"]
> >>>>>>> remote = origin
> >>>>>>> merge = refs/heads/master
> >>>>>>>
> >>>>>>> -----Original Message-----
> >>>>>>> From: Dave Scott
> >>>>>>> Sent: Friday, April 26, 2013 9:22 AM
> >>>>>>> To: Santosh Jodh
> >>>>>>> Cc: Anil Madhavapeddy; John Else; xen-api@xxxxxxxxxxxxx
> >>>>>>> Subject: Re: [Xen-API] Compiling xen-api on Debian Wheezy AMD64
> >>>>>>>
> >>>>>>> On 26/04/13 16:55, Santosh Jodh wrote:
> >>>>>>>> I guess I am still at master.
> >>>>>>>>
> >>>>>>>> sjodh@REDBLD-XS:~/src/netscaler/xen-api$ git branch -l
> >>>>>>>> * master
> >>>>>>>> sjodh@REDBLD-XS:~/src/netscaler/xen-api$ git remote -v origin
> >>>>>>>> git://github.com/xen-org/xen-api.git (fetch) origin
> >>>>>>>> git://github.com/xen-org/xen-api.git (push)
> >>>>>>>>
> >>>>>>>> Is the fusion one git://github.com/jonludlam/xen-api.git?
> >>>>>>>
> >>>>>>> It is... but each repo has several branches. I think all you
> >>>>>>> need
> >>> to do is:
> >>>>>>>
> >>>>>>> cd xen-api
> >>>>>>> git checkout fusion
> >>>>>>> make
> >>>>>>
> >>>>>> Try this (I've got a good feeling about this one!)
> >>>>>>
> >>>>>> rm -rf xen-api
> >>>>>> git clone git://github.com/jonludlam/xen-api.git
> >>>>>> cd xen-api
> >>>>>> git checkout fusion
> >>>>>> make
> >>>>>>
> >>>>>> Cheers,
> >>>>>> Dave
> >>>>>>
> >>>>>>>
> >>>>>>> Cheers,
> >>>>>>> Dave
> >>>>>>>
> >>>>>>>>
> >>>>>>>> -----Original Message-----
> >>>>>>>> From: Dave Scott
> >>>>>>>> Sent: Friday, April 26, 2013 8:52 AM
> >>>>>>>> To: Santosh Jodh
> >>>>>>>> Cc: Anil Madhavapeddy; John Else; xen-api@xxxxxxxxxxxxx
> >>>>>>>> Subject: Re: [Xen-API] Compiling xen-api on Debian Wheezy
> AMD64
> >>>>>>>>
> >>>>>>>> Could you confirm which xen-api branch you're trying to build?
> >>> Something like "git branch -l" and "git remote -v".
> >>>>>>>>
> >>>>>>>> The package 'rpc-light' installs an OCaml package called
> 'rpclib'
> >>>>>>>> these
> >>>>>>>> days:
> >>>>>>>>
> >>>>>>>> $ ocamlfind list | grep rpc
> >>>>>>>> rpclib (version: 1.2.0)
> >>>>>>>> rpclib.core (version: n/a)
> >>>>>>>> rpclib.idl (version: n/a)
> >>>>>>>> rpclib.js (version: n/a)
> >>>>>>>> rpclib.json (version: n/a)
> >>>>>>>> rpclib.syntax (version: n/a)
> >>>>>>>> rpclib.unix (version: n/a)
> >>>>>>>> rpclib.xml (version: n/a)
> >>>>>>>>
> >>>>>>>> It looks like the branch of xen-api you're trying to build is
> >>> still using the old name.
> >>>>>>>>
> >>>>>>>> Cheers,
> >>>>>>>> Dave
> >>>>>>>>
> >>>>>>>> On 26/04/13 15:28, Santosh Jodh wrote:
> >>>>>>>>> The initial ones were from
> >>>>>>>>>
> http://wiki.xensource.com/wiki/XenAPI_client_libraries_for_oca
> >>>>>>>>> ml
> >>>>>>>>>
> >>>>>>>>> Rest from this thread and compiler output.
> >>>>>>>>>
> >>>>>>>>> According to opam, rpc is already installed.
> >>>>>>>>>
> >>>>>>>>> sjodh@REDBLD-XS:~/src/netscaler/xen-api$ opam install rpc
> >>> Package
> >>>>>>>>> rpc is already installed (current version is 1.4.1)
> >>>>>>>>>
> >>>>>>>>> -----Original Message-----
> >>>>>>>>> From: Anil Madhavapeddy [mailto:anil@xxxxxxxxxx]
> >>>>>>>>> Sent: Friday, April 26, 2013 7:23 AM
> >>>>>>>>> To: Santosh Jodh
> >>>>>>>>> Cc: Dave Scott; John Else; xen-api@xxxxxxxxxxxxx
> >>>>>>>>> Subject: Re: [Xen-API] Compiling xen-api on Debian Wheezy
> >>>>>>>>> AMD64
> >>>>>>>>>
> >>>>>>>>> "opam install rpc" will give you rpc-light.
> >>>>>>>>>
> >>>>>>>>> Which wiki page are you getting all these instructions from?
> >>> I'd like to see what the custom Xen OPAM packages are, as there
> seem
> >>> to be some custom ones that aren't distributed in mainline OPAM.
> >>>>>>>>>
> >>>>>>>>> -anil
> >>>>>>>>>
> >>>>>>>>> On 26 Apr 2013, at 15:05, Santosh Jodh
> >>>>>>>>> <Santosh.Jodh@xxxxxxxxxx>
> >>> wrote:
> >>>>>>>>>
> >>>>>>>>>> Where do I get rpc-light? ocamlffind nor opam seem to know
> >>> about it.
> >>>>>>>>>>
> >>>>>>>>>> ocamlfind: Package `rpc-light' not found
> >>>>>>>>>> - scan ocaml/idl scan-ocaml-dm_api.mli
> >>>>>>>>>> + ocamlfind ocamldep -package
> >>>>>>>>>> + xml-light2,sexpr,log,rpc-light,http-svr
> >>>>>>>>>> + -native -I ocaml_backend -I ../database -I .. dm_api.mli
> >>>>>>>>>> ocamlfind: Package `rpc-light' not found
> >>>>>>>>>> *** omake: 210/355 targets are up to date
> >>>>>>>>>> *** omake: failed (0.35 sec, 10/10 scans, 4/6 rules, 104/387
> >>>>>>>>>> digests)
> >>>>>>>>>> *** omake: targets were not rebuilt because of errors:
> >>>>>>>>>> <scanner ocaml/database/scan-ocaml-
> string_marshall_helper.ml>
> >>>>>>>>>> depends on: ocaml/database/string_marshall_helper.ml
> >>>>>>>>>> <scanner ocaml/idl/ocaml_backend/scan-ocaml-gen_common.ml>
> >>>>>>>>>> depends on: ocaml/idl/ocaml_backend/gen_common.ml
> >>>>>>>>>> <scanner ocaml/idl/scan-ocaml-datamodel_utils.ml>
> >>>>>>>>>> depends on: ocaml/idl/datamodel_utils.ml <scanner
> >>>>>>>>>> ocaml/idl/scan-ocaml-dm_api.ml>
> >>>>>>>>>> depends on: ocaml/idl/dm_api.ml <scanner
> >>>>>>>>>> ocaml/idl/scan-ocaml-dm_api.mli>
> >>>>>>>>>> depends on: ocaml/idl/dm_api.mli
> >>>>>>>>>> make: *** [all] Error 2
> >>>>>>>>>> sjodh@REDBLD-XS:~/src/netscaler/xen-api$ opam install
> >>>>>>>>>> rpc-light rpc-light is not a valid versioned package name
> >>>>>>>>>> 'opam install rpc-light' failed.
> >>>>>>>>>>
> >>>>>>>>>> -----Original Message-----
> >>>>>>>>>> From: Dave Scott
> >>>>>>>>>> Sent: Thursday, April 25, 2013 11:31 PM
> >>>>>>>>>> To: Santosh Jodh
> >>>>>>>>>> Cc: Anil Madhavapeddy; John Else; xen-api@xxxxxxxxxxxxx
> >>>>>>>>>> Subject: Re: [Xen-API] Compiling xen-api on Debian Wheezy
> >>>>>>>>>> AMD64
> >>>>>>>>>>
> >>>>>>>>>> xen-api-libs-transitional is a fixed branch of xen-api-libs;
> >>> you should only need xen-api now...
> >>>>>>>>>>
> >>>>>>>>>> --
> >>>>>>>>>> Dave Scott
> >>>>>>>>>> XenServer System Architect
> >>>>>>>>>>
> >>>>>>>>>> On Apr 25, 2013, at 11:02 PM, "Santosh Jodh"
> >>> <Santosh.Jodh@xxxxxxxxxx> wrote:
> >>>>>>>>>>
> >>>>>>>>>>> opam install xen-api-libs-transitional
> >>>>>>>>>>>
> >>>>>>>>>>> now succeeds after installing ocaml-native-compilers ,
> >>>>>>>>>>> camlp4-
> >>> extra, libxen-dev.
> >>>>>>>>>>>
> >>>>>>>>>>> However, xen-api-libs still fails with the same error. Will
> >>> try the fusion branch next.
> >>>>>>>>>>>
> >>>>>>>>>>> -----Original Message-----
> >>>>>>>>>>> From: Dave Scott
> >>>>>>>>>>> Sent: Thursday, April 25, 2013 2:55 PM
> >>>>>>>>>>> To: Santosh Jodh
> >>>>>>>>>>> Cc: Anil Madhavapeddy; John Else; xen-api@xxxxxxxxxxxxx
> >>>>>>>>>>> Subject: Re: [Xen-API] Compiling xen-api on Debian Wheezy
> >>> AMD64
> >>>>>>>>>>>
> >>>>>>>>>>> Or sorry I also notice you haven't got the xen headers
> >>> installed: try installing xen-devel.
> >>>>>>>>>>>
> >>>>>>>>>>> --
> >>>>>>>>>>> Dave Scott
> >>>>>>>>>>> XenServer System Architect
> >>>>>>>>>>>
> >>>>>>>>>>> On Apr 25, 2013, at 10:47 PM, "Santosh Jodh"
> >>> <Santosh.Jodh@xxxxxxxxxx> wrote:
> >>>>>>>>>>>
> >>>>>>>>>>>> That command fails:
> >>>>>>>>>>>>
> >>>>>>>>>>>> ==== ERROR [while installing xenctrl.5.0.0] ====
> >>>>>>>>>>>> # opam-version 1.0.1
> >>> (8c7302ecf30bd830a0055b8833292b4554bec0e2)
> >>>>>>>>>>>> # os linux
> >>>>>>>>>>>> # command make
> >>>>>>>>>>>> # path
> >>> /shared/home/sjodh/.opam/system/build/xenctrl.5.0.0
> >>>>>>>>>>>> # exit-code 2
> >>>>>>>>>>>> # env-file
> >>> /shared/home/sjodh/.opam/system/build/xenctrl.5.0.0/xenctrl-2635-
> >>> d474c2.env
> >>>>>>>>>>>> # stdout-file
> >>> /shared/home/sjodh/.opam/system/build/xenctrl.5.0.0/xenctrl-2635-
> >>> d474c2.out
> >>>>>>>>>>>> # stderr-file
> >>> /shared/home/sjodh/.opam/system/build/xenctrl.5.0.0/xenctrl-2635-
> >>> d474c2.err
> >>>>>>>>>>>> ### stdout ###
> >>>>>>>>>>>> ...[truncated]
> >>>>>>>>>>>> ocamlfind ocamlc -c lib/gntshr_stubs.c ocamlfind ocamlc -c
> >>>>>>>>>>>> lib/gnttab_stubs.c ocamlfind ocamlc -c
> lib/eventchn_stubs.c
> >>>>>>>>>>>> ocamlfind ocamlc -c lib/xenmmap_stubs.c mv xenmmap_stubs.o
> >>>>>>>>>>>> lib/xenmmap_stubs.o ocamlfind ocamlc -c
> lib/xenctrl_stubs.c
> >>>>>>>>>>>> + ocamlfind ocamlc -c lib/eventchn_stubs.c
> >>>>>>>>>>>> lib/eventchn_stubs.c:24:21: fatal error: xenctrl.h: No
> such
> >>>>>>>>>>>> file or directory compilation terminated.
> >>>>>>>>>>>> Command exited with code 2.
> >>>>>>>>>>>> ### stderr ###
> >>>>>>>>>>>> /bin/sh: ocamlopt.opt: command not found
> >>>>>>>>>>>> E: Failure("Command ''/usr/bin/ocamlbuild'
> >>>>>>>>>>>> lib/libxenctrl_stubs.a lib/dllxenctrl_stubs.so
> >>> lib/xenctrl.cma
> >>>>>>>>>>>> lib/xenctrl.cmxa lib/xenctrl.a lib/xenctrl.cmxs -tag debug
> >>>>>>>>>>>> -j 4' terminated with error code 10")
> >>>>>>>>>>>> make: *** [build] Error 1
> >>>>>>>>>>>>
> >>>>>>>>>>>> 'opam install xen-api-libs-transitional' failed.
> >>>>>>>>>>>>
> >>>>>>>>>>>> -----Original Message-----
> >>>>>>>>>>>> From: Dave Scott
> >>>>>>>>>>>> Sent: Thursday, April 25, 2013 2:40 PM
> >>>>>>>>>>>> To: Santosh Jodh
> >>>>>>>>>>>> Cc: Anil Madhavapeddy; John Else; xen-api@xxxxxxxxxxxxx
> >>>>>>>>>>>> Subject: Re: [Xen-API] Compiling xen-api on Debian Wheezy
> >>>>>>>>>>>> AMD64
> >>>>>>>>>>>>
> >>>>>>>>>>>> Try "opam install xen-api-libs-transitional" -- iirc the
> >>>>>>>>>>>> name
> >>> of type-conv changed upstream and we haven't changed everything
> over
> >>> to the new name yet.
> >>>>>>>>>>>>
> >>>>>>>>>>>> If that works you might want to try building either Jon's
> >>> "fusion" branch of xen-api or my "upstream-packages" one on github.
> >>>>>>>>>>>>
> >>>>>>>>>>>> --
> >>>>>>>>>>>> Dave Scott
> >>>>>>>>>>>> XenServer System Architect
> >>>>>>>>>>>>
> >>>>>>>>>>>> On Apr 25, 2013, at 10:36 PM, "Santosh Jodh"
> >>> <Santosh.Jodh@xxxxxxxxxx> wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>>> opam install installed type_conv but I am still getting
> >>>>>>>>>>>>> the
> >>> exact same error. Do I need to refresh environment to pick up the
> >>> newly installed type_conv?
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> -----Original Message-----
> >>>>>>>>>>>>> From: Anil Madhavapeddy [mailto:anil@xxxxxxxxxx]
> >>>>>>>>>>>>> Sent: Thursday, April 25, 2013 2:34 PM
> >>>>>>>>>>>>> To: Santosh Jodh
> >>>>>>>>>>>>> Cc: Dave Scott; John Else; xen-api@xxxxxxxxxxxxx
> >>>>>>>>>>>>> Subject: Re: [Xen-API] Compiling xen-api on Debian Wheezy
> >>>>>>>>>>>>> AMD64
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Try "opam install type_conv" and see if that helps when
> >>>>>>>>>>>>> you
> >>> retry xen-api-libs.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> -anil
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> On 25 Apr 2013, at 22:32, Santosh Jodh
> >>> <Santosh.Jodh@xxxxxxxxxx> wrote:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>> I am hitting an error while building xen-api-libs now.
> It
> >>> cannot find type-conv:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> ocamlfind ocamlc -I ../xml-light2 -I ../stdext -I
> ../uuid
> >>>>>>>>>>>>>> -package camlp4,type-conv -ppopt -I -ppopt
> >>>>>>>>>>>>>> /usr/lib/ocaml/type-conv -ppopt -I -ppopt ../rpc-light
> >>>>>>>>>>>>>> -ppopt pa_rpc.cma -syntax camlp4o -I ../rpc-light -I
> >>>>>>>>>>>>>> ../jsonrpc -I ../rpc-light -I ../jsonrpc -I ../rpc-
> light
> >>>>>>>>>>>>>> -
> >>> c
> >>>>>>>>>>>>>> -o fe.cmo fe.ml
> >>>>>>>>>>>>>> ocamlfind: Package `type-conv' not found
> >>>>>>>>>>>>>> make[1]: *** [fe.cmo] Error 2
> >>>>>>>>>>>>>> make[1]: Leaving directory
> >>> `/shared/home/sjodh/src/netscaler/xen-api-libs/stdext'
> >>>>>>>>>>>>>> make: *** [all] Error 2
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> -----Original Message-----
> >>>>>>>>>>>>>> From: Anil Madhavapeddy [mailto:anil@xxxxxxxxxx]
> >>>>>>>>>>>>>> Sent: Thursday, April 25, 2013 7:33 AM
> >>>>>>>>>>>>>> To: Santosh Jodh
> >>>>>>>>>>>>>> Cc: Dave Scott; John Else; xen-api@xxxxxxxxxxxxx
> >>>>>>>>>>>>>> Subject: Re: [Xen-API] Compiling xen-api on Debian
> Wheezy
> >>>>>>>>>>>>>> AMD64
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> OPAM 1.0 has been released and will be in binary
> packages
> >>> as soon as Debian and other packaging vendors catch up in their
> >>> release
> >>> cycles:
> >>>>>>>>>>>>>> https://github.com/OCamlPro/opam/issues/149
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Therefore it is safe to remove the xen-org/opam snapshot
> >>> now.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> To upgrade OPAM, you just need to compile OPAM-1.0 and
> >>> replace the OPAM binary, and run 'opam update' to refresh your
> >>> package list. It may be easier to just delete ~/.opam and
> recompile packages.
> >>> There is no state for OPAM held outside of ~/.opam.
> >>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> -anil
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> On 25 Apr 2013, at 15:13, Santosh Jodh
> >>> <Santosh.Jodh@xxxxxxxxxx> wrote:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Yes - they are from wiki
> >>> http://wiki.xensource.com/wiki/XenAPI_client_libraries_for_ocaml.
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Can we remove the obsolete repo git://github.com/xen-
> >>> org/opam?
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> I will try the new instructions. Do I need to uninstall
> >>> opam first? And how do I do that?
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Thanks,
> >>>>>>>>>>>>>>> Santosh
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> From: Dave Scott
> >>>>>>>>>>>>>>> Sent: Thursday, April 25, 2013 4:51 AM
> >>>>>>>>>>>>>>> To: John Else
> >>>>>>>>>>>>>>> Cc: Santosh Jodh; Jonathan Ludlam; xen-
> api@xxxxxxxxxxxxx
> >>>>>>>>>>>>>>> Subject: Re: Compiling xen-api on Debian Wheezy AMD64
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Hi,
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Thanks, John -- your instructions look right to me.
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Santosh: were the broken instructions on the wiki? If
> >>>>>>>>>>>>>>> so,
> >>> please update them once you get it working!
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Thanks,
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> --
> >>>>>>>>>>>>>>> Dave Scott
> >>>>>>>>>>>>>>> XenServer System Architect
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> On Apr 25, 2013, at 12:32 PM, "John Else"
> >>> <john.else@xxxxxxxxxx> wrote:
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Hi Santosh,
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Firstly I'd recommend cloning opam from the OCamlPro
> >>> repository, rather than xen-org's fork (it's several months out of
> >>> date), and secondly building a tagged release of opam rather than
> >>> the master branch. Try:
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> git clone git://github.com/OCamlPro/opam cd opam git
> >>>>>>>>>>>>>>> checkout latest ./configure && make && sudo make
> install
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Then you can initialise opam with the default
> (OCamlPro)
> >>> repository, and add xen-org's repository:
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> opam init
> >>>>>>>>>>>>>>> eval `opam config env`
> >>>>>>>>>>>>>>> opam remote add xen-org
> >>>>>>>>>>>>>>> git://github.com/xen-org/opam-repo-dev
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Hope this helps,
> >>>>>>>>>>>>>>> John
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> From: xen-api-bounces@xxxxxxxxxxxxx
> >>>>>>>>>>>>>>> [mailto:xen-api-bounces@xxxxxxxxxxxxx] On Behalf
> >>>>>>>>>>>>>>> OfSantosh Jodh
> >>>>>>>>>>>>>>> Sent: 22 April 2013 23:12
> >>>>>>>>>>>>>>> To: Jonathan Ludlam; Dave Scott; xen-api@xxxxxxxxxxxxx
> >>>>>>>>>>>>>>> Subject: [Xen-API] Compiling xen-api on Debian Wheezy
> >>> AMD64
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> I am trying to compile xen-api - specifically rrdump.ml
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> ocamlc version:
> >>>>>>>>>>>>>>> The Objective Caml compiler, version 3.12.1 Standard
> >>>>>>>>>>>>>>> library
> >>>>>>>>>>>>>>> directory: /usr/lib/ocaml
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> git clone git://github.com/xen-org/opam cd opam;
> >>>>>>>>>>>>>>> ./configure && make && sudo make install
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> This succeeded.
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> sjodh@REDBLD-XS:~/src/netscaler/xen-api-libs$ opam init
> >>>>>>>>>>>>>>> git://github.com/xen-org/opam-repository
> >>>>>>>>>>>>>>> Fetching git://github.com/xen-org/opam-repository ...
> >>>>>>>>>>>>>>> { patches } are invalid field names in
> >>>>>>>>>>>>>>> /home/sjodh/.opam/opam/bigbro.2.0.4-rev3.opam. Valid
> >>> fields
> >>>>>>>>>>>>>>> are { opam-version, maintainer, substs, build, remove,
> >>>>>>>>>>>>>>> depends, depopts, conflicts, libraries, syntax,
> >>>>>>>>>>>>>>> ocaml-version, build-env, license, authors, homepage,
> >>>>>>>>>>>>>>> version, name } 'opam init
> >>>>>>>>>>>>>>> git://github.com/xen-org/opam-repository' failed
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Regards,
> >>>>>>>>>>>>>>> Santosh
> >>>>>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>>>>> Xen-api mailing list
> >>>>>>>>>>>>>>> Xen-api@xxxxxxxxxxxxx
> >>>>>>>>>>>>>>> http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Xen-api mailing list
> >>>>>> Xen-api@xxxxxxxxxxxxx
> >>>>>> http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api
> >>>>>
> >>>>> _______________________________________________
> >>>>> Xen-api mailing list
> >>>>> Xen-api@xxxxxxxxxxxxx
> >>>>> http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> Xen-api mailing list
> >>>> Xen-api@xxxxxxxxxxxxx
> >>>> http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api
_______________________________________________
Xen-api mailing list
Xen-api@xxxxxxxxxxxxx
http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |