Xen project Mailing List

On 07/03/13 09:59, murali wrote:
>Hi,
>I run it again with latest prep.sh
>and got the error same.

Did you change line 87 of the script, like I said to do below? The original line 87 will ignore errors, but if you rewrite it like so:

   git clone ${repo}

It will fail when there is an error. I just wanted to see what error was being raised.

Mike

>i downloaded manually xen-api-master and renamed it as xen-api.
>prep.sh runs with no errors.
>then
>       cd xen-xapi
>   " [root@localhost xen-api]# make srpm
>mkdir -p /usr/src/redhat/SOURCES /usr/src/redhat/SPECS /usr/src/redhat/SRPMS
>while ! [ -d .git ]; do cd ..; done; \
>         git archive --prefix=xapi-0.2/ --format=tar HEAD | bzip2 -z >
>/usr/src/redhat/SOURCES/xapi-0.2.tar.bz2 # xen-api/Makefile
>
>"
>not returns from command.
>
>
>
>
>
>
>On 03/06/13, *Mike McClurg * <mike.mcclurg@xxxxxxxxxx> wrote:
>>On 06/03/13 09:45, murali wrote:
>>>
>>>i cant found the xen-api folder created in 7/8 step.
>>>
>>>got this error.
>>>
>>>exec ./prep.sh
>>>Cloning into xen-api...
>>>/root/prep.sh: line 88: cd: xen-api: No such file or directory
>>
>>Looks like the git clone on line 87 is failing, but I covered this up
>>with too much error handline. Make sure you have the latest prep.sh,
>>and then edit line 87 to read:
>>
>>git clone ${repo}
>>
>>Then run it again. You should see what's going wrong now. Write back
>>with the output and we'll get this fixed.
>>
>>Mike
>>
>>>
>>>
>>>On 03/05/13, *George Shuklin * <george.shuklin@xxxxxxxxx> wrote:
>>>>05.03.2013 12:18, Mike McClurg пишет:
>>>>>
>>>>>>>> xen-device-model-1.6.10-54.7533.i686
>>>>>>>>          libxenstore.so.3.0 is needed by
>>>>>>>> xen-device-model-1.6.10-54.7533.i686
>>>>>>>> ......
>>>>>>>>
>>>>>>>> Any ideas? Thanks.
>>>>>>>
>>>>>>>
>>>>>>> First, try re-running it. If that doesn't work, try manually
>>>>>>> installing the RPMs in the ext-rpms directory (rpm -i
>>ext-rpms/*.rpm).
>>>>>>> If that doesn't work, were there any other error message prior
>>to the
>>>>>>> rpm installs failing?
>>>>>>>
>>>>>>>
>>>>>> He trying to install it on clear Centos5, not dom0. There is a set of
>>>>>> binary packages needed from dom0 to install -devel packages, and all
>>>>>> them are in source distribution iso's. As soon as I get exact list, I
>>>>>> think its better to publish them on www (without iso "archiver").
>>>>>
>>>>> Yes, I agree. Once you get me the list I'll upload them to that
>>>>> location and update the script. Thanks George,
>>>>>
>>>>>
>>>>
>>>>
>>>> From yum repositories:
>>>>yum install SDL e4fsprogs-libs gcc rpm-build tetex-latex
>>>>
>>>>
>>>>Here minimal list of packages from binpkg.iso and source-1.iso to
>>>>satisfy ./prep.sh
>>>>(list 1)
>>>>kernel-xen-devel-2.6.32.43-0.4.1.xs1.6.10.734.170748.i686.rpm
>>>>kernel-kdump-2.6.32.43-0.4.1.xs1.6.10.734.170748.i686.rpm
>>>>libev-4.04-1.i686.rpm
>>>>blktap-2.0.90.xs726-xs6.1.0.i686.rpm
>>>>xen-hypervisor-4.1.3-1.6.10.498.23551.i686.rpm
>>>>xen-tools-4.1.3-1.6.10.498.23551.i686.rpm
>>>>
>>>>Files from isos, should be placed in specified location:
>>>>
>>>>(list 2)
>>>> mkdir /_javascript_/
>>>> mkdir /_javascript_/jquery
>>>> mkdir /_javascript_/jquery/treeview
>>>>
>>>>jquery-1.1.3.1.pack.js -> /_javascript_/jquery/jquery-1.1.3.1.pack.js
>>>>jquery.treeview.zip -> /_javascript_/jquery/treeview/jquery.treeview.zip
>>>>
>>>>
>>>>Whole <s>installation</s> compilation guide is looks like this:
>>>>
>>>>1) Install epel:
>>>>
>>>>wget
>>>>http://download.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm
>>>>rpm -i epel-release-5-4.noarch.rpm
>>>># current part of prep.sh for epel is somehow broken.
>>>>
>>>>2) Install some packages:
>>>>yum install SDL e4fsprogs-libs gcc rpm-build tetex-latex
>>>>
>>>>3) download prep.sh script
>>>>wget https://raw.github.com/mcclurmc/xcp-sdk/master/prep.sh
>>>>chmod +x prep.sh
>>>>
>>>>4) download or copy from ISOs files from list 1 (above)
>>>>5) install them.
>>>>
>>>>6) create directories and copy files from list 2 (above)
>>>>
>>>>7) exec ./prep.sh
>>>>
>>>>8) cd xen-api
>>>>
>>>>9) exec fix for pyo/pyc files:
>>>>sed -e /.pyo/d -e /.pyc/d -i xapi.spec
>>>>#this will be fixed later
>>>>
>>>>10) make srpm
>>>>11) rpm -i /usr/src/redhat/SRPMS/xapi-noarch-0.2-5217.src.rpm
>>>>12) rpmbuild -bb /usr/src/redhat/SPECS/xapi.spec
>>>>
>>>>...and few minutes later fresh and shiny xapi waiting for battle:
>>>>
>>>>/usr/src/redhat/RPMS/i386/xapi-tests-0.2-5217.i386.rpm
>>>>/usr/src/redhat/RPMS/i386/xapi-xenopsd-0.2-5217.i386.rpm
>>>>/usr/src/redhat/RPMS/i386/xapi-rrd-devel-0.2-5217.i386.rpm
>>>>/usr/src/redhat/RPMS/i386/xapi-squeezed-0.2-5217.i386.rpm
>>>>/usr/src/redhat/RPMS/i386/xapi-core-0.2-5217.i386.rpm
>>>>/usr/src/redhat/RPMS/i386/xapi-datamodel-devel-0.2-5217.i386.rpm
>>>>/usr/src/redhat/RPMS/i386/xapi-networkd-0.2-5217.i386.rpm
>>>>/usr/src/redhat/RPMS/i386/xapi-rrdd-0.2-5217.i386.rpm
>>>>/usr/src/redhat/RPMS/i386/xapi-xenops-0.2-5217.i386.rpm
>>>>/usr/src/redhat/RPMS/i386/xapi-xe-0.2-5217.i386.rpm
>>>>/usr/src/redhat/RPMS/i386/xapi-v6d-0.2-5217.i386.rpm
>>>>/usr/src/redhat/RPMS/i386/xapi-client-devel-0.2-5217.i386.rpm
>>>>
>>>>
>>>>It can compile not only xcp-tampa, but even the tampa-lcm head, which
>>>>allows to backport.. ... I mean crossport fixes from tampa-lcm to
>>>>xcp-tampa.
>>>>
>>>>I hope Mike will adopt those changes to prep.sh.
>>>>
>>>>_______________________________________________
>>>>Xen-api mailing list
>>>>Xen-api@xxxxxxxxxxxxx
>>>>http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api
>>>--
>>>Murali Kalyan
>>>NIC-Delhi
>>
>--
>Murali Kalyan
>NIC-Delhi

Re: [Xen-API] how to compile XCP source?