[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-API] XCP 1.6 on Intel MFSYS25 NIC's detect problem
Hello, I trying to install the XCP 1.6 ISO Image on hardware Intel Modular Server MFSYS25v1. The server has 4 NIC's during installation, but are not detected.
In this same hardware mode l have installed a xenserver 5.6 and the nic's are detected correctly, see below: [root @ vms01 ~] # lspci | grep Ethe 05:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Serdes) (rev 01)
05:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Serdes) (rev 01) 08:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
08:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) [Root @ vms01 ~] # [root @ vms01 ~] # cat / etc / modprobe.conf alias eth0 e1000e
alias eth2 e1000e alias eth1 e1000e alias eth3 e1000e [Root @ vms01 ~] # [root @ vms01 ~] # modinfo e1000e filename: / lib/modules/2.6.32.12-0.7.1.xs5.6.100.327.170613xen/kernel/drivers/net/e1000e/e1000e.ko
version: 1.2.8-NAPI license: GPL description: Intel (R) PRO/1000 Network Driver author: Intel Corporation, <linux.nics@xxxxxxxxx> [root @ vms01 ~] # ethtool eth0, ethtool eth1; ethtool eth2; ethtool eth3 Settings for eth0: Supported ports: [FIBRE] Supported link modes: 1000baseT/Full
Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full Advertised auto-negotiation: Yes Speed: 1000Mb / s Duplex: Full
Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: on Supports Wake-on: pumbag Wake-on: g Current message level: 0x00000001 (1)
Link detected: yes Settings for eth1: Supported ports: [FIBRE] Supported link modes: 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full
Advertised auto-negotiation: Yes Speed: 1000Mb / s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: on
Supports Wake-on: pumbag Wake-on: g Current message level: 0x00000001 (1) Link detected: yes Settings for eth2: Supported ports: [FIBRE]
Supported link modes: 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full Advertised auto-negotiation: Yes Speed: 1000Mb / s
Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: on Supports Wake-on: pumbag Wake-on: g
Current message level: 0x00000001 (1) Link detected: yes Settings for eth3: Supported ports: [FIBRE] Supported link modes: 1000baseT/Full
Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full Advertised auto-negotiation: Yes Speed: 1000Mb / s Duplex: Full
Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: on Supports Wake-on: d Wake-on: d Current message level: 0x00000001 (1)
Link detected: yes [root @ vms01 ~] # Any tips? Thank you _______________________________________________ Xen-api mailing list Xen-api@xxxxxxxxxxxxx http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |