Xen project Mailing List

Re: [Xen-API] Jumbo Frame in XCP

From: Marco Sinhoreli <msinhore@xxxxxxxxx>

Date: Fri, 11 Mar 2011 16:38:46 -0300

Cc: "xen-api@xxxxxxxxxxxxxxxxxxx" <xen-api@xxxxxxxxxxxxxxxxxxx>

Delivery-date: Fri, 11 Mar 2011 11:38:58 -0800

Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; b=nSLWSDMlvJAotmOGPM7KIfrHxtkdmIabxWNXg+bQBvfoX+SH+k+YvkStrMJD8eYObE 5i01Lh8NPUBckpUgxXxLCJkq48EhVbncutWYiipISzDUsqTw8hVaacgQRpfB75N1bHMp x3pgNidIBSTyhYdXr8eJJ4p3Pp2DJYTF16H+k=

List-id: Discussion of API issues surrounding Xen <xen-api.lists.xensource.com>

Hi Rob: Thanks for your help! All now is working fine. Cheers On Fri, Mar 11, 2011 at 2:49 PM, Rob Hoes <Rob.Hoes@xxxxxxxxxx> wrote: > Hi Marco, > > You need to set the MTU on the Network, not on the PIF, and then unplug/plug > the PIFs. > > Cheers, > Rob > >> -----Original Message----- >> From: xen-api-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-api- >> bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Marco Sinhoreli >> Sent: 11 March 2011 17:11 >> To: xen-api >> Subject: [Xen-API] Jumbo Frame in XCP >> >> Hello all: >> >> I changed the mtu of all pif's (eth0 and eth1) but after reboot the >> servers the mtu stay 1500. The command I used is: >> >> # xe pif-param-set uuid=<host uuid> other-config:ethtool-mtu=9000 >> >> Is the jumbo frame supported by XCP 1.0? >> >> Cheers, >> >> -- >> Marco Sinhoreli >> >> _______________________________________________ >> xen-api mailing list >> xen-api@xxxxxxxxxxxxxxxxxxx >> http://lists.xensource.com/mailman/listinfo/xen-api > -- Marco Sinhoreli _______________________________________________ xen-api mailing list xen-api@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/mailman/listinfo/xen-api

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.