Re: [win-pv-devel] Driver 8.2 not working with Xen 4.9

[Laurent Sauve <lsauve@xxxxxxxx>]

I made a clean install and follow one of the post you made to explain order of installation for the drivers as follow:

 

1. xenbus

2. xenvif

3. xennet

4. reboot

5. xenvbd

6. reboot

7. xeniface

 

I can do 1-3, the at reboot its stuck. I again join the logs from the complete installation and the kern.log. So far, I can boot the VM when I got in device manager and disable the XEN PV Network Driver for the network card but I first need to go to safe mode for that.

 

 

When I try to enable the driver, I get this in the qemu log:

 

XENNET|DriverEntry: XENNET 8.2.0 (6) (28.02.2017)

XENVIF|PdoSetFriendlyName: 0: Xen PV Network Device #0

XENVIF|SettingsSave: FROM Ethernet (Realtek RTL8139C+ Fast Ethernet NIC)

XENVIF|SettingsCopyIpAddresses: Version6: ADDRESSES NOT FOUND

XENBUS|UnplugRequest: NICS (MAKE)

XEN|UnplugIncrementValue: NICS 1

XENVIF|PdoStartDevice: fail9

XENVIF|__DriverRequestReboot: ====>

XENVIF|__DriverRequestReboot: <====

XENVIF|PdoStartDevice: fail8

XENVIF|PdoStartDevice: fail7

XENVIF|PdoStartDevice: fail6

XENVIF|PdoStartDevice: fail5

XENVIF|PdoStartDevice: fail4

XENVIF|PdoStartDevice: fail3

XENVIF|PdoStartDevice: fail2

XENVIF|PdoStartDevice: fail1 (c0000001)

XENNET|DriverUnload: XENNET 8.2.0 (6) (28.02.2017)

 

And the screenshot of Screen Shot 2017-11-13 at 12.42.29 and Screen Shot 2017-11-15 at 10.02.06 and the reboot is then stuck again.

 

Hope this can help see what the trouble is.

 

Laurent Sauve

 

 

 

Attachment: Screen Shot 2017-11-15 at 10.02.06.png
Description: Screen Shot 2017-11-15 at 10.02.06.png

Attachment: xen-log.zip
Description: xen-log.zip

Attachment: Screen Shot 2017-11-13 at 12.42.29.png
Description: Screen Shot 2017-11-13 at 12.42.29.png

_______________________________________________
win-pv-devel mailing list
win-pv-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/cgi-bin/mailman/listinfo/win-pv-devel