Re: [Wg-test-framework] May 13th XenProject - AllNet call

["Paul L. George" <pgeorge@xxxxxxxxxx>]

Guys, 

I moved the lines back to Oseleta 0/1 and replaced the rimava 0 = tty 28
and rimava 1 = tty 32 lines with tested cables plus on rimava0 I used a
straight thru cable and a factory null Modem connector.  I tested this cable
with my laptop connected to the serial port and it seemed to work. In Rimava
1 I used a tested cable with a null modem adaptor we made.  Both passed the
loop back test.  I tired several BIOS settings but the original settings
were correct.

I also heard something rebooting when I was nowhere near the rack.  I
assumed it was just a test restarting one of the servers. I heard it once
about 17:20 my time and again about at about 18:00.  If it was something
caused let me know.  I am being as careful as I can be in a rack full of
wires. I am paranoid now so any thing I hear that is not normal causes me to
check all the servers to see if they are rebooting.

Paul 

-----Original Message-----
From: Don Koch [mailto:dkoch@xxxxxxxxxxx] 
Sent: Wednesday, May 13, 2015 12:00 PM
To: Ian Jackson
Cc: Lars Kurth; wg-test-framework@xxxxxxxxxxxxxxxxxxxx; Paul George; Koch,
Donald
Subject: Re: [Wg-test-framework] May 13th XenProject - AllNet call

On Wed, 13 May 2015 11:39:51 -0400
Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx> wrote:

> Lars Kurth writes ("[Wg-test-framework] May 13th XenProject - AllNet
call"):
> > == OsoletaX ==
> > *Agreement: Ian to detach sympathy from both Osoleta's*
> 
> `oseleta'.  I have detached sympathy from both and they are now 
> available on serial0 with runes like
>   picocom -b 115200 /dev/ttyRP7
>   picocom -b 115200 /dev/ttyRP8

Excellent. I shall test my script on it as soon as we move the lines back
around.

Thanks!
-d

> Thanks,
> Ian.
> 


_______________________________________________
Wg-test-framework mailing list
Wg-test-framework@xxxxxxxxxxxxxxxxxxxx
http://lists.xenproject.org/cgi-bin/mailman/listinfo/wg-test-framework