|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [libvirt test] 132846: regressions - FAIL
flight 132846 libvirt real [real] http://logs.test-lab.xenproject.org/osstest/logs/132846/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: build-i386-libvirt 6 libvirt-build fail REGR. vs. 132776 Tests which did not succeed, but are not blocking: test-amd64-i386-libvirt-xsm 1 build-check(1) blocked n/a test-amd64-i386-libvirt-pair 1 build-check(1) blocked n/a test-amd64-i386-libvirt 1 build-check(1) blocked n/a test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 1 build-check(1) blocked n/a test-armhf-armhf-libvirt 14 saverestore-support-check fail like 132776 test-armhf-armhf-libvirt-raw 13 saverestore-support-check fail like 132776 test-arm64-arm64-libvirt 13 migrate-support-check fail never pass test-arm64-arm64-libvirt 14 saverestore-support-check fail never pass test-arm64-arm64-libvirt-xsm 13 migrate-support-check fail never pass test-arm64-arm64-libvirt-xsm 14 saverestore-support-check fail never pass test-amd64-amd64-libvirt 13 migrate-support-check fail never pass test-amd64-amd64-libvirt-xsm 13 migrate-support-check fail never pass test-arm64-arm64-libvirt-qcow2 12 migrate-support-check fail never pass test-arm64-arm64-libvirt-qcow2 13 saverestore-support-check fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass test-amd64-amd64-libvirt-vhd 12 migrate-support-check fail never pass test-armhf-armhf-libvirt 13 migrate-support-check fail never pass test-armhf-armhf-libvirt-raw 12 migrate-support-check fail never pass version targeted for testing: libvirt 3bc3cca7bb43101730c94bc82762e5744420215a baseline version: libvirt 7c9dcfed5ae6d5874ea0e67e47a6871707b8446a Last test of basis 132776 2019-02-03 13:45:39 Z 2 days Testing same since 132846 2019-02-04 13:03:42 Z 1 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Andrea Bolognani <abologna@xxxxxxxxxx> Cole Robinson <crobinso@xxxxxxxxxx> Peter Krempa <pkrempa@xxxxxxxxxx> jobs: build-amd64-xsm pass build-arm64-xsm pass build-i386-xsm pass build-amd64 pass build-arm64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-arm64-libvirt pass build-armhf-libvirt pass build-i386-libvirt fail build-amd64-pvops pass build-arm64-pvops pass build-armhf-pvops pass build-i386-pvops pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm blocked test-amd64-amd64-libvirt-xsm pass test-arm64-arm64-libvirt-xsm pass test-amd64-i386-libvirt-xsm blocked test-amd64-amd64-libvirt pass test-arm64-arm64-libvirt pass test-armhf-armhf-libvirt pass test-amd64-i386-libvirt blocked test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair blocked test-arm64-arm64-libvirt-qcow2 pass test-armhf-armhf-libvirt-raw pass test-amd64-amd64-libvirt-vhd pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit 3bc3cca7bb43101730c94bc82762e5744420215a Author: Peter Krempa <pkrempa@xxxxxxxxxx> Date: Thu Jan 31 15:37:53 2019 +0100 qemu: domain: Use 'raw' for 'volume' disks without format Storage pools might want to specify format of the image when translating the volume thus we can't add any default format when parsing the XML. Add a explicit format when starting the VM and format is not present neither by user specifying it nor by the storage pool translation function. Signed-off-by: Peter Krempa <pkrempa@xxxxxxxxxx> Reviewed-by: Ján Tomko <jtomko@xxxxxxxxxx> commit 2f78ca803afb0be9091788cb3b115b480b9c812e Author: Peter Krempa <pkrempa@xxxxxxxxxx> Date: Thu Oct 4 14:43:46 2018 +0200 qemu: domain: Assume 'raw' default storage format also for network storage Post parse callback adds the 'raw' type only for local files. Remote files can also have backing store (even local) so we should do this also for network backed storage. Note that virStorageFileGetMetadata always considers files with no type as raw so we will not accidentally traverse the backing chain and allow unexpected files being labelled with svirt labels. Signed-off-by: Peter Krempa <pkrempa@xxxxxxxxxx> Reviewed-by: Ján Tomko <jtomko@xxxxxxxxxx> commit 6b618d2d5fd1dfd134a06dca4d2351ef94d8237b Author: Peter Krempa <pkrempa@xxxxxxxxxx> Date: Mon Oct 8 15:30:36 2018 +0200 tests: qemu: Test network disks without format specified explicitly Modify some existing tests of network-based disks to omit the storage format specification. Signed-off-by: Peter Krempa <pkrempa@xxxxxxxxxx> Reviewed-by: Ján Tomko <jtomko@xxxxxxxxxx> commit 6db0d033839807aec885e10b5a45748da016e261 Author: Peter Krempa <pkrempa@xxxxxxxxxx> Date: Fri Feb 1 17:54:46 2019 +0100 qemu: command: Don't skip 'readonly' and throttling info for empty drive In commit f80eae8c2ae I was too agresive in removing properties of -drive for empty drives. It turns out that qemu actually persists the state of 'readonly' and the throttling information even for the empty drive. Removing 'readonly' thus made qemu open any subsequent images added via the 'change' command as RW which was forbidden by selinux thanks to the restrictive sVirt label for readonly media. Fix this by formating the property again and bump the tests and leave a note detailing why the rest of the properties needs to be skipped. Signed-off-by: Peter Krempa <pkrempa@xxxxxxxxxx> Reviewed-by: Daniel P. Berrangé <berrange@xxxxxxxxxx> commit ae3955f486973b00bb5f2511d811f16b516923a5 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Mon Feb 4 09:22:31 2019 +0100 news: Fix typo Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx> commit af36f8a641809556ac18dcc076f996033cb2385c Author: Cole Robinson <crobinso@xxxxxxxxxx> Date: Sun Jan 20 12:23:29 2019 -0500 Require a semicolon for VIR_ONCE_GLOBAL_INIT calls Missing semicolon at the end of macros can confuse some analyzers (like cppcheck <filename>). VIR_ONCE_GLOBAL_INIT is almost exclusively called without an ending semicolon, but let's standardize on using one like the other macros. Add a dummy struct definition at the end of the macro, so the compiler will require callers to add a semicolon. Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> Signed-off-by: Cole Robinson <crobinso@xxxxxxxxxx> commit 8bec5488a60ece485309dc2955227b61bf1a2f27 Author: Cole Robinson <crobinso@xxxxxxxxxx> Date: Sun Jan 20 11:32:42 2019 -0500 Require a semicolon for VIR_LOG_INIT calls Missing semicolon at the end of macros can confuse some analyzers (like cppcheck <filename>), and we have a mix of semicolon and non-semicolon usage through the code. Let's standardize on using a semicolon for VIR_LOG_INIT calls. Drop the semicolon from the final statement of the macro, so the compiler will require callers to add a semicolon. Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> Signed-off-by: Cole Robinson <crobinso@xxxxxxxxxx> commit 6a4d938dd33b8a73409a36ee1bd766ee57c74a27 Author: Cole Robinson <crobinso@xxxxxxxxxx> Date: Sun Jan 20 11:30:15 2019 -0500 Require a semicolon for VIR_ENUM_IMPL calls Missing semicolon at the end of macros can confuse some analyzers (like cppcheck <filename>), and we have a mix of semicolon and non-semicolon usage through the code. Let's standardize on using a semicolon for VIR_ENUM_IMPL calls. Move the verify() statement to the end of the macro and drop the semicolon, so the compiler will require callers to add a semicolon. While we are touching these call sites, standardize on putting the closing parenth on its own line, as discussed here: https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> Signed-off-by: Cole Robinson <crobinso@xxxxxxxxxx> commit 7662194bf32bee40b0dfc558344c37e5a76b12a6 Author: Cole Robinson <crobinso@xxxxxxxxxx> Date: Sun Jan 20 11:04:56 2019 -0500 Require a semicolon to VIR_ENUM_DECL calls Missing semicolon at the end of macros can confuse some analyzers (like cppcheck <filename>), and we have a mix of semicolon and non-semicolon usage through the code. Let's standardize on using a semicolon for VIR_ENUM_DECL calls. Drop the semicolon from the final statement of the macro, so the compiler will require callers to add a semicolon. Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> Signed-off-by: Cole Robinson <crobinso@xxxxxxxxxx> _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |