|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [UNIKRAFT PATCH v2 4/7] lib/ukblkdev: blkreq.h: Use UK_BLKREQ_ prefix for states and ops
Instead of using `UK_BLKDEV_REQ_` prefix for `struct uk_blkreq`
states (finished, unfinished) and `UK_BLKDEV_` prefix for operation
requests (read, write, flush) this commits simplifies the API by using
the `UK_BLKREQ_` prefix.
Signed-off-by: Simon Kuenzer <simon.kuenzer@xxxxxxxxx>
---
lib/ukblkdev/include/uk/blkdev.h | 10 +++++-----
lib/ukblkdev/include/uk/blkdev_driver.h | 2 +-
lib/ukblkdev/include/uk/blkreq.h | 14 +++++++-------
plat/drivers/virtio/virtio_blk.c | 12 ++++++------
plat/xen/drivers/blk/blkfront.c | 10 +++++-----
5 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/lib/ukblkdev/include/uk/blkdev.h b/lib/ukblkdev/include/uk/blkdev.h
index 7aa099092..abc228d9c 100644
--- a/lib/ukblkdev/include/uk/blkdev.h
+++ b/lib/ukblkdev/include/uk/blkdev.h
@@ -459,18 +459,18 @@ int uk_blkdev_sync_io(struct uk_blkdev *dev,
sector, \
nb_sectors, \
buf) \
- uk_blkdev_sync_io(blkdev, queue_id, UK_BLKDEV_WRITE, sector, \
- nb_sectors, buf) \
+ uk_blkdev_sync_io(blkdev, queue_id, UK_BLKREQ_WRITE, sector, \
+ nb_sectors, buf) \
#define uk_blkdev_sync_read(blkdev,\
queue_id, \
sector, \
nb_sectors, \
buf) \
- uk_blkdev_sync_io(blkdev, queue_id, UK_BLKDEV_READ, sector, \
- nb_sectors, buf) \
+ uk_blkdev_sync_io(blkdev, queue_id, UK_BLKREQ_READ, sector, \
+ nb_sectors, buf) \
-#endif
+#endif /* CONFIG_LIBUKBLKDEV_SYNC_IO_BLOCKED_WAITING */
/**
* Stop a Unikraft block device, and set its state to UK_BLKDEV_CONFIGURED
diff --git a/lib/ukblkdev/include/uk/blkdev_driver.h
b/lib/ukblkdev/include/uk/blkdev_driver.h
index be8070691..cb1b3ba39 100644
--- a/lib/ukblkdev/include/uk/blkdev_driver.h
+++ b/lib/ukblkdev/include/uk/blkdev_driver.h
@@ -104,7 +104,7 @@ static inline void uk_blkdev_drv_queue_event(struct
uk_blkdev *dev,
* uk_blkreq structure
*/
#define uk_blkreq_finished(req) \
- (ukarch_store_n(&(req)->state.counter, UK_BLKDEV_REQ_FINISHED))
+ (ukarch_store_n(&(req)->state.counter, UK_BLKREQ_FINISHED))
/**
* Frees the data allocated for the Unikraft Block Device.
diff --git a/lib/ukblkdev/include/uk/blkreq.h b/lib/ukblkdev/include/uk/blkreq.h
index 0bf4ae3ff..ae1a31ed5 100644
--- a/lib/ukblkdev/include/uk/blkreq.h
+++ b/lib/ukblkdev/include/uk/blkreq.h
@@ -58,8 +58,8 @@ struct uk_blkreq;
* Operation status
*/
enum uk_blkreq_state {
- UK_BLKDEV_REQ_FINISHED = 0,
- UK_BLKDEV_REQ_UNFINISHED
+ UK_BLKREQ_FINISHED = 0,
+ UK_BLKREQ_UNFINISHED
};
/**
@@ -67,11 +67,11 @@ enum uk_blkreq_state {
*/
enum uk_blkreq_op {
/* Read operation */
- UK_BLKDEV_READ = 0,
+ UK_BLKREQ_READ = 0,
/* Write operation */
- UK_BLKDEV_WRITE,
+ UK_BLKREQ_WRITE,
/* Flush the volatile write cache */
- UK_BLKDEV_FFLUSH = 4
+ UK_BLKREQ_FFLUSH = 4
};
/**
@@ -135,7 +135,7 @@ static inline void uk_blkreq_init(struct uk_blkreq *req,
req->start_sector = start;
req->nb_sectors = nb_sectors;
req->aio_buf = aio_buf;
- ukarch_store_n(&req->state.counter, UK_BLKDEV_REQ_UNFINISHED);
+ ukarch_store_n(&req->state.counter, UK_BLKREQ_UNFINISHED);
req->cb = cb;
req->cb_cookie = cb_cookie;
}
@@ -147,7 +147,7 @@ static inline void uk_blkreq_init(struct uk_blkreq *req,
* uk_blkreq structure
**/
#define uk_blkreq_is_done(req) \
- (ukarch_load_n(&(req)->state.counter) == UK_BLKDEV_REQ_FINISHED)
+ (ukarch_load_n(&(req)->state.counter) == UK_BLKREQ_FINISHED)
#ifdef __cplusplus
}
diff --git a/plat/drivers/virtio/virtio_blk.c b/plat/drivers/virtio/virtio_blk.c
index ff33cc119..262355b49 100644
--- a/plat/drivers/virtio/virtio_blk.c
+++ b/plat/drivers/virtio/virtio_blk.c
@@ -186,7 +186,7 @@ static int virtio_blkdev_request_write(struct
uk_blkdev_queue *queue,
vbdev = queue->vbd;
cap = &vbdev->blkdev.capabilities;
req = virtio_blk_req->req;
- if (req->operation == UK_BLKDEV_WRITE &&
+ if (req->operation == UK_BLKREQ_WRITE &&
cap->mode == O_RDONLY)
return -EPERM;
@@ -209,11 +209,11 @@ static int virtio_blkdev_request_write(struct
uk_blkdev_queue *queue,
goto out;
}
- if (req->operation == UK_BLKDEV_WRITE) {
+ if (req->operation == UK_BLKREQ_WRITE) {
*read_segs = queue->sg.sg_nseg - 1;
*write_segs = 1;
virtio_blk_req->virtio_blk_outhdr.type = VIRTIO_BLK_T_OUT;
- } else if (req->operation == UK_BLKDEV_READ) {
+ } else if (req->operation == UK_BLKREQ_READ) {
*read_segs = 1;
*write_segs = queue->sg.sg_nseg - 1;
virtio_blk_req->virtio_blk_outhdr.type = VIRTIO_BLK_T_IN;
@@ -278,11 +278,11 @@ static int virtio_blkdev_queue_enqueue(struct
uk_blkdev_queue *queue,
virtio_blk_req->req = req;
virtio_blk_req->virtio_blk_outhdr.sector = req->start_sector;
- if (req->operation == UK_BLKDEV_WRITE ||
- req->operation == UK_BLKDEV_READ)
+ if (req->operation == UK_BLKREQ_WRITE ||
+ req->operation == UK_BLKREQ_READ)
rc = virtio_blkdev_request_write(queue, virtio_blk_req,
&read_segs, &write_segs);
- else if (req->operation == UK_BLKDEV_FFLUSH)
+ else if (req->operation == UK_BLKREQ_FFLUSH)
rc = virtio_blkdev_request_flush(queue, virtio_blk_req,
&read_segs, &write_segs);
else
diff --git a/plat/xen/drivers/blk/blkfront.c b/plat/xen/drivers/blk/blkfront.c
index 5cd5cf226..60b634665 100644
--- a/plat/xen/drivers/blk/blkfront.c
+++ b/plat/xen/drivers/blk/blkfront.c
@@ -250,7 +250,7 @@ static void blkif_request_init(struct blkif_request
*ring_req,
UK_ASSERT(nb_segments <= BLKIF_MAX_SEGMENTS_PER_REQUEST);
/* Set ring request */
- ring_req->operation = (req->operation == UK_BLKDEV_WRITE) ?
+ ring_req->operation = (req->operation == UK_BLKREQ_WRITE) ?
BLKIF_OP_WRITE : BLKIF_OP_READ;
ring_req->nr_segments = nb_segments;
ring_req->sector_number = req->start_sector;
@@ -281,7 +281,7 @@ static int blkfront_request_write(struct blkfront_request
*blkfront_req,
dev = blkfront_req->queue->dev;
cap = &dev->blkdev.capabilities;
sector_size = cap->ssize;
- if (req->operation == UK_BLKDEV_WRITE && cap->mode == O_RDONLY)
+ if (req->operation == UK_BLKREQ_WRITE && cap->mode == O_RDONLY)
return -EPERM;
if (req->aio_buf == NULL)
@@ -360,10 +360,10 @@ static int blkfront_queue_enqueue(struct uk_blkdev_queue
*queue,
ring_req->id = (uintptr_t) blkfront_req;
ring_req->handle = dev->handle;
- if (req->operation == UK_BLKDEV_READ ||
- req->operation == UK_BLKDEV_WRITE)
+ if (req->operation == UK_BLKREQ_READ ||
+ req->operation == UK_BLKREQ_WRITE)
rc = blkfront_request_write(blkfront_req, ring_req);
- else if (req->operation == UK_BLKDEV_FFLUSH)
+ else if (req->operation == UK_BLKREQ_FFLUSH)
rc = blkfront_request_flush(blkfront_req, ring_req);
else
rc = -EINVAL;
--
2.20.1
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |