|
Hey Felipe,
Please see one small comment inline.
Thanks,
Vlad
On 25.09.2019 11:07, Felipe Huici wrote:
We use the BSD-3-Clause license for this library glue code.
Signed-off-by: Felipe Huici <felipe.huici@xxxxxxxxx>
---
CODING_STYLE.md | 4 ++++
CONTRIBUTING.md | 4 ++++
COPYING.md | 39 +++++++++++++++++++++++++++++++++++++++
Config.uk | 8 ++++++++
MAINTAINERS.md | 12 ++++++++++++
README.md | 16 ++++++++++++++++
exportsyms.uk | 1 +
7 files changed, 84 insertions(+)
create mode 100644 CODING_STYLE.md
create mode 100644 CONTRIBUTING.md
create mode 100644 COPYING.md
create mode 100644 Config.uk
create mode 100644 MAINTAINERS.md
create mode 100644 README.md
create mode 100644 exportsyms.uk
diff --git a/CODING_STYLE.md b/CODING_STYLE.md
new file mode 100644
index 0000000..5730041
--- /dev/null
+++ b/CODING_STYLE.md
@@ -0,0 +1,4 @@
+Coding Style
+============
+
+Please refer to the `CODING_STYLE.md` file in the main Unikraft repository.
diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md
new file mode 100644
index 0000000..14f6ac6
--- /dev/null
+++ b/CONTRIBUTING.md
@@ -0,0 +1,4 @@
+Contributing to Unikraft
+========================
+
+Please refer to the `CONTRIBUTING.md` file in the main Unikraft repository.
diff --git a/COPYING.md b/COPYING.md
new file mode 100644
index 0000000..0664989
--- /dev/null
+++ b/COPYING.md
@@ -0,0 +1,39 @@
+License
+=======
+
+Unikraft micropython wrappers
+----------------------------------
+
+This repository contains wrapper code to build micropython with Unikraft.
+Each C code file in this repository should declare who is the
+copyright owner and under which terms and conditions the code is
+licensed. If such a licence note is missing, the following copyright
+notice will apply:
+
+ Copyright (c) Year, Institution. All rights reserved.
I think that there here should be the NEC copyright.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holder nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
diff --git a/Config.uk b/Config.uk
new file mode 100644
index 0000000..b38a7d7
--- /dev/null
+++ b/Config.uk
@@ -0,0 +1,8 @@
+config LIBMICROPYTHON
+ bool "Micropython - Python for microcontrollers"
+ default y
+ select LIBLWIP
+ select LIBNEWLIBC
+ select LWIP_NOTHREADS
+ select LWIP_IGMP
+ select LIBUKMMAP
\ No newline at end of file
diff --git a/MAINTAINERS.md b/MAINTAINERS.md
new file mode 100644
index 0000000..ca50121
--- /dev/null
+++ b/MAINTAINERS.md
@@ -0,0 +1,12 @@
+Maintainers List
+================
+
+For notes on how to read this information, please refer to `MAINTAINERS.md` in
+the main Unikraft repository.
+
+ LIBPCRE-UNIKRAFT
+ M: Felipe Huici <felipe.huici@xxxxxxxxx>
+ M: Simon Kuenzer <simon.kuenzer@xxxxxxxxx>
+ M: Vlad-Andrei BĂDOIU <vlad_andrei.badoiu@xxxxxxxxxxxxxxx>
+ L: minios-devel@xxxxxxxxxxxxx
+ F: *
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..8fa3b85
--- /dev/null
+++ b/README.md
@@ -0,0 +1,16 @@
+micorpython for Unikraft
+=============================
+
+This is the port of micropython for Unikraft as external library. By
+default, when running the port will go into interactive mode (though
+note that for now there is a slight problem with it in that characters
+are echoed twice). Alternatively, you can run a script from a file if
+passed as a initrd parameter.
+
+Please also note that in the menu, for lwip, you need to select the
+"Mainloop (non-threaded)" option for "Operation mode". This is stated
+in Micropython's Config.uk (select LWIP_NOTHREADS), but this feature
+is broken in kConfig.
+
+Please refer to the `README.md` as well as the documentation in the `doc/`
+subdirectory of the main unikraft repository.
diff --git a/exportsyms.uk b/exportsyms.uk
new file mode 100644
index 0000000..c86c3f3
--- /dev/null
+++ b/exportsyms.uk
@@ -0,0 +1 @@
+none
\ No newline at end of file
_______________________________________________
Minios-devel mailing list
Minios-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/minios-devel
|
