[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Minios-devel] [UNIKRAFT PATCH v2 4/5] plat/solo5: Add the solo5 API declaration in solo5.h
Just a minor thing, shouldn't this patch be ordered before 1/5?
On 19.03.19 11:31, Haibo Xu wrote:
Add the solo5 binding APIs declaration to introduce
the functions which will be used in the implementation
of related platform interface.
Signed-off-by: Haibo Xu <haibo.xu@xxxxxxx>
---
plat/solo5/include/solo5/setup.h | 49 ++++++
plat/solo5/include/solo5/solo5.h | 280 +++++++++++++++++++++++++++++++
2 files changed, 329 insertions(+)
create mode 100644 plat/solo5/include/solo5/setup.h
create mode 100644 plat/solo5/include/solo5/solo5.h
diff --git a/plat/solo5/include/solo5/setup.h b/plat/solo5/include/solo5/setup.h
new file mode 100644
index 0000000..5936901
--- /dev/null
+++ b/plat/solo5/include/solo5/setup.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Authors: Haibo Xu <haibo.xu@xxxxxxx>
+ *
+ * Copyright (c) 2018, Arm Ltd. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * THIS HEADER MAY NOT BE EXTRACTED OR MODIFIED IN ANY WAY.
+ */
+
+#ifndef __SETUP_H__
+#define __SETUP_H__
+
+#include <sys/types.h>
+
+struct libsolo5plat_opts {
+ struct {
+ void *base;
+ size_t len;
+ } heap;
+};
+
+extern struct libsolo5plat_opts _libsolo5plat_opts;
+
+#endif /* __SETUP_H__ */
diff --git a/plat/solo5/include/solo5/solo5.h b/plat/solo5/include/solo5/solo5.h
new file mode 100644
index 0000000..a293513
--- /dev/null
+++ b/plat/solo5/include/solo5/solo5.h
@@ -0,0 +1,280 @@
+/*
+ * Copyright (c) 2015-2018 Contributors as noted in the AUTHORS file
+ *
+ * This file is part of Solo5, a sandboxed execution environment.
+ *
+ * Permission to use, copy, modify, and/or distribute this software
+ * for any purpose with or without fee is hereby granted, provided
+ * that the above copyright notice and this permission notice appear
+ * in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
+ * OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef SOLO5_H_INCLUDED
+#define SOLO5_H_INCLUDED
+
+#include <stdint.h>
+
+typedef unsigned long size_t;
+/*
+ * Solo5 public APIs.
+ *
+ * These APIs are still under development and may change at any time.
+ *
+ * The documentation in this file reflects the *intent* of the API; current
+ * Solo5 implementations may deviate from the specified behaviour in the short
+ * term. If you find such cases that are not documented here, please file a
+ * bug.
+ */
+
+/*
+ * Error handling.
+ *
+ * For APIs returning a solo5_result_t:
+ *
+ * Unless otherwise documented below, these APIs return only SOLO5_R_OK on
+ * success.
+ *
+ * Application developers MUST NOT RELY on these APIs returning
+ * SOLO5_R_EINVAL or SOLO5_R_EUNSPEC. Solo5 implementations MAY choose to
+ * abort execution of the application in preference to returning an error
+ * result on failure.
+ *
+ * For APIs NOT returning a solo5_result_t:
+ *
+ * These APIs either:
+ *
+ * a) always succeed under normal operation, or
+ * b) abort execution of the application on failure.
+ *
+ * For the avoidance of doubt, calling APIs on devices that are not present
+ * WILL result in aborting execution of the application.
+ */
+typedef enum {
+ /*
+ * The operation completed successfully.
+ */
+ SOLO5_R_OK = 0,
+ /*
+ * The operation cannot be completed at this time. Retrying an identical
+ * operation at a later time may succeed.
+ */
+ SOLO5_R_AGAIN,
+ /*
+ * Invalid argument.
+ */
+ SOLO5_R_EINVAL,
+ /*
+ * The operation failed due to an unspecified error.
+ */
+ SOLO5_R_EUNSPEC
+} solo5_result_t;
+
+/*
+ * Application entry point.
+ *
+ * The application is passed a pointer (*info) to a statically allocated
+ * (struct solo5_start_info) with start of day information; any data in this
+ * structure should be treated as read-only.
+ *
+ * The application receives the (info->heap_start, info->heap_size) of a
+ * single, contiguous, non-executable, read/write memory region it may use for
+ * heap or stack(s) as it sees fit. At entry, the application is provided with
+ * an initial stack growing down from (info->heap_start + info->heap_size).
+ *
+ * The application MUST NOT make any further assumptions about memory layout,
+ * including where executable code or static data are located in memory.
+ *
+ * Returning from this function is equivalent to calling solo5_exit(<return
+ * value>).
+ */
+struct solo5_start_info {
+ //const char *cmdline;
+ char *cmdline;
+ uintptr_t heap_start;
+ size_t heap_size;
+};
+
+int solo5_app_main(const struct solo5_start_info *info);
+
+/*
+ * Exit the application, returning (status) to the host if possible.
+ *
+ * Status values of 255 and above are reserved for use by Solo5.
+ */
+#define SOLO5_EXIT_SUCCESS 0
+#define SOLO5_EXIT_FAILURE 1
+#define SOLO5_EXIT_ABORT 255
+
+void solo5_exit(int status) __attribute__((noreturn));
+
+/*
+ * Abort the application, returning a status of SOLO5_EXIT_ABORT to the host if
+ * possible.
+ *
+ * This call is intended to signal an abnormal exit to the host. Depending on
+ * the tender configuration, this may trigger further actions such a
+ * generating a core file.
+ */
+void solo5_abort(void) __attribute__((noreturn));
+
+/*
+ * Time.
+ */
+
+/*
+ * Solo5 type for time values, with nanosecond precision.
+ */
+typedef uint64_t solo5_time_t;
+
+/*
+ * Returns monotonic time since an unspecified period in the past.
+ */
+solo5_time_t solo5_clock_monotonic(void);
+
+/*
+ * Returns wall clock time in UTC since the UNIX epoch (1970-01-01).
+ */
+solo5_time_t solo5_clock_wall(void);
+
+/*
+ * Suspends execution of the application until either:
+ *
+ * a) monotonic time reaches (deadline), or
+ * b) solo5_net_read() would succeed.
+ *
+ * Returns true if solo5_net_read() will succeed, otherwise false.
+ *
+ * This interface may be extended in the future to allow for selection of I/O
+ * events of interest to the application.
+ */
+int solo5_yield(solo5_time_t deadline);
+
+/*
+ * Console I/O.
+ */
+
+/*
+ * Writes (size) bytes from (*buf) to the console.
+ *
+ * Writing to the console is a best-effort operation: this operation will
+ * always succeed but may lose data, for example in the event of resource
+ * exhaustion on the host.
+ */
+void solo5_console_write(const char *buf, size_t size);
+
+/*
+ * Network I/O.
+ *
+ * Currently only a single Ethernet-style device is supported.
+ *
+ * These interfaces will change in the future to support multiple devices.
+ */
+
+/*
+ * Ethernet address length in bytes.
+ */
+#define SOLO5_NET_ALEN 6
+/*
+ * Ethernet frame header (target, source, type) length in bytes.
+ */
+#define SOLO5_NET_HLEN 14
+
+struct solo5_net_info {
+ uint8_t mac_address[SOLO5_NET_ALEN];
+ size_t mtu; /* Not including Ethernet header */
+};
+
+/*
+ * Retrieves information about the network device. Caller must supply space for
+ * struct solo5_net_info in (info).
+ */
+void solo5_net_info(struct solo5_net_info *info);
+
+/*
+ * Sends a single network packet from the buffer (*buf), without blocking. If
+ * the packet cannot be sent due to a transient error (e.g. no resources
+ * available) it will be silently dropped.
+ *
+ * The maximum allowed value for (size) is (solo5_net_info.mtu +
+ * SOLO5_NET_HLEN). The packet must include the ethernet frame header.
+ */
+solo5_result_t solo5_net_write(const uint8_t *buf, size_t size);
+
+/*
+ * Receives a single network packet into the buffer (*buf), without blocking.
+ *
+ * (size) must be at least (solo5_net_info.mtu + SOLO5_NET_HLEN).
+ *
+ * If no packets are available returns SOLO5_R_AGAIN, otherwise returns
+ * SOLO5_R_OK and the size of the received packet including the ethernet frame
+ * header in (*read_size).
+ */
+solo5_result_t solo5_net_read(uint8_t *buf, size_t size, size_t *read_size);
+
+/*
+ * Block I/O.
+ *
+ * Currently only a single block-addressable device is supported.
+ *
+ * The minimum unit of I/O which can be performed on a block device is defined
+ * by solo5_block_info.block_size. In practice we currently also limit the
+ * *maximum* unit of I/O to the block size.
+ *
+ * These interfaces will change in the future to support multiple devices and,
+ * depending on atomicity guarantees, may be extended to support I/O operations
+ * of >1 block per call.
+ */
+
+/*
+ * Architecture-independent type for block device offsets, in bytes.
+ */
+typedef uint64_t solo5_off_t;
+
+struct solo5_block_info {
+ solo5_off_t capacity; /* Capacity of block device, bytes */
+ solo5_off_t block_size; /* Minimum I/O unit (block size), bytes */
+};
+
+/*
+ * Retrieves information about the block device. Caller must supply space for
+ * struct solo5_block_info in (info).
+ */
+void solo5_block_info(struct solo5_block_info *info);
+
+/*
+ * Writes data of (size) bytes from the buffer (*buf) to the block device,
+ * starting at byte (offset). Data is either written in it's entirety or not at
+ * all ("short writes" are not possible).
+ *
+ * Both (size) and (offset) must be a multiple of the block size, otherwise
+ * SOLO5_R_EINVAL is returned.
+ *
+ * NOTE: Current implementations further limit the *maximum* I/O size to a
+ * single block.
+ */
+solo5_result_t solo5_block_write(solo5_off_t offset, const uint8_t *buf,
+ size_t size);
+
+/*
+ * Reads data of (size) bytes into the buffer (*buf) from the block device,
+ * starting at byte (offset). Always reads the full amount of (size) bytes
+ * ("short reads" are not possible).
+ *
+ * Both (size) and (offset) must be a multiple of the block size, otherwise
+ * SOLO5_R_EINVAL is returned.
+ *
+ * NOTE: Current implementations further limit the *maximum* I/O size to a
+ * single block.
+ */
+solo5_result_t solo5_block_read(solo5_off_t offset, uint8_t *buf, size_t size);
+
+#endif
_______________________________________________
Minios-devel mailing list
Minios-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/minios-devel
|
