|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Minios-devel] [UNIKRAFT PATCH 2/4] lib/nolibc: sscanf reorganize functions inside file
Just put them in the order they are used - so no prototypes are needed
Signed-off-by: Yuri Volchkov <yuri.volchkov@xxxxxxxxx>
---
lib/nolibc/sscanf.c | 199 ++++++++++++++++++++++----------------------
1 file changed, 98 insertions(+), 101 deletions(-)
diff --git a/lib/nolibc/sscanf.c b/lib/nolibc/sscanf.c
index 806ca4f..149bfbd 100644
--- a/lib/nolibc/sscanf.c
+++ b/lib/nolibc/sscanf.c
@@ -84,18 +84,96 @@ __FBSDID("$FreeBSD$");
#define CT_INT 3 /* integer, i.e., strtoq or strtouq */
typedef u_quad_t (*ccfntype)(const char *, char **, int);
-static const u_char *__sccl(char *, const u_char *);
-
-int
-sscanf(const char *ibuf, const char *fmt, ...)
+/*
+ * Fill in the given table from the scanset at the given format
+ * (just after `['). Return a pointer to the character past the
+ * closing `]'. The table has a 1 wherever characters should be
+ * considered part of the scanset.
+ */
+static const u_char *
+__sccl(char *tab, const u_char *fmt)
{
- va_list ap;
- int ret;
-
- va_start(ap, fmt);
- ret = vsscanf(ibuf, fmt, ap);
- va_end(ap);
- return(ret);
+ int c, n, v;
+
+ /* first `clear' the whole table */
+ c = *fmt++; /* first char hat => negated scanset */
+ if (c == '^') {
+ v = 1; /* default => accept */
+ c = *fmt++; /* get new first char */
+ } else
+ v = 0; /* default => reject */
+
+ /* XXX: Will not work if sizeof(tab*) > sizeof(char) */
+ for (n = 0; n < 256; n++)
+ tab[n] = v; /* memset(tab, v, 256) */
+
+ if (c == 0)
+ return (fmt - 1);/* format ended before closing ] */
+
+ /*
+ * Now set the entries corresponding to the actual scanset
+ * to the opposite of the above.
+ *
+ * The first character may be ']' (or '-') without being special;
+ * the last character may be '-'.
+ */
+ v = 1 - v;
+ for (;;) {
+ tab[c] = v; /* take character c */
+doswitch:
+ n = *fmt++; /* and examine the next */
+ switch (n) {
+
+ case 0: /* format ended too soon */
+ return (fmt - 1);
+
+ case '-':
+ /*
+ * A scanset of the form
+ * [01+-]
+ * is defined as `the digit 0, the digit 1,
+ * the character +, the character -', but
+ * the effect of a scanset such as
+ * [a-zA-Z0-9]
+ * is implementation defined. The V7 Unix
+ * scanf treats `a-z' as `the letters a through
+ * z', but treats `a-a' as `the letter a, the
+ * character -, and the letter a'.
+ *
+ * For compatibility, the `-' is not considered
+ * to define a range if the character following
+ * it is either a close bracket (required by ANSI)
+ * or is not numerically greater than the character
+ * we just stored in the table (c).
+ */
+ n = *fmt;
+ if (n == ']' || n < c) {
+ c = '-';
+ break; /* resume the for(;;) */
+ }
+ fmt++;
+ /* fill in the range */
+ do {
+ tab[++c] = v;
+ } while (c < n);
+ c = n;
+ /*
+ * Alas, the V7 Unix scanf also treats formats
+ * such as [a-c-e] as `the letters a through e'.
+ * This too is permitted by the standard....
+ */
+ goto doswitch;
+ break;
+
+ case ']': /* end of scanset */
+ return (fmt);
+
+ default: /* just another character */
+ c = n;
+ break;
+ }
+ }
+ /* NOTREACHED */
}
int
@@ -547,95 +625,14 @@ match_failure:
return (nassigned);
}
-/*
- * Fill in the given table from the scanset at the given format
- * (just after `['). Return a pointer to the character past the
- * closing `]'. The table has a 1 wherever characters should be
- * considered part of the scanset.
- */
-static const u_char *
-__sccl(char *tab, const u_char *fmt)
+int
+sscanf(const char *ibuf, const char *fmt, ...)
{
- int c, n, v;
-
- /* first `clear' the whole table */
- c = *fmt++; /* first char hat => negated scanset */
- if (c == '^') {
- v = 1; /* default => accept */
- c = *fmt++; /* get new first char */
- } else
- v = 0; /* default => reject */
-
- /* XXX: Will not work if sizeof(tab*) > sizeof(char) */
- for (n = 0; n < 256; n++)
- tab[n] = v; /* memset(tab, v, 256) */
-
- if (c == 0)
- return (fmt - 1);/* format ended before closing ] */
-
- /*
- * Now set the entries corresponding to the actual scanset
- * to the opposite of the above.
- *
- * The first character may be ']' (or '-') without being special;
- * the last character may be '-'.
- */
- v = 1 - v;
- for (;;) {
- tab[c] = v; /* take character c */
-doswitch:
- n = *fmt++; /* and examine the next */
- switch (n) {
-
- case 0: /* format ended too soon */
- return (fmt - 1);
-
- case '-':
- /*
- * A scanset of the form
- * [01+-]
- * is defined as `the digit 0, the digit 1,
- * the character +, the character -', but
- * the effect of a scanset such as
- * [a-zA-Z0-9]
- * is implementation defined. The V7 Unix
- * scanf treats `a-z' as `the letters a through
- * z', but treats `a-a' as `the letter a, the
- * character -, and the letter a'.
- *
- * For compatibility, the `-' is not considered
- * to define a range if the character following
- * it is either a close bracket (required by ANSI)
- * or is not numerically greater than the character
- * we just stored in the table (c).
- */
- n = *fmt;
- if (n == ']' || n < c) {
- c = '-';
- break; /* resume the for(;;) */
- }
- fmt++;
- /* fill in the range */
- do {
- tab[++c] = v;
- } while (c < n);
- c = n;
- /*
- * Alas, the V7 Unix scanf also treats formats
- * such as [a-c-e] as `the letters a through e'.
- * This too is permitted by the standard....
- */
- goto doswitch;
- break;
-
- case ']': /* end of scanset */
- return (fmt);
-
- default: /* just another character */
- c = n;
- break;
- }
- }
- /* NOTREACHED */
+ va_list ap;
+ int ret;
+
+ va_start(ap, fmt);
+ ret = vsscanf(ibuf, fmt, ap);
+ va_end(ap);
+ return(ret);
}
-
--
2.17.1
_______________________________________________
Minios-devel mailing list
Minios-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/minios-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |