domid: 4 Using file /dev/disk/by-path/ip-10.2.0.10:3260-iscsi-iqn.2013-05.net.shatteredsilicon:edi-lun-0 in read-write mode Watching /local/domain/0/device-model/4/logdirty/cmd Watching /local/domain/0/device-model/4/command Watching /local/domain/4/cpu char device redirected to /dev/pts/4 qemu_map_cache_init nr_buckets = 10000 size 4194304 shared page at pfn feffd buffered io page at pfn feffb Guest uuid = a57e6840-e9f5-4a14-a822-b2cc662c177f populating video RAM at ff000000 mapping video RAM from ff000000 Register xen platform. Done register platform. platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state. xs_read(/local/domain/0/device-model/4/xen_extended_power_mgmt): read error xs_read(): vncpasswd get error. /vm/a57e6840-e9f5-4a14-a822-b2cc662c177f/vncpasswd. Log-dirty: no command yet. I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 vcpu-set: watch node error. I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 xs_read(/local/domain/4/log-throttling): read error qemu: ignoring not-understood drive `/local/domain/4/log-throttling' medium change watch on `/local/domain/4/log-throttling' - unknown device, ignored I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 dm-command: hot insert pass-through pci dev register_real_device: Assigning real physical device 00:1a.0 ... register_real_device: Enable MSI translation via per device option register_real_device: Disable power management pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x0:0x1a.0x0 pt_register_regions: IO region registered (size=0x00000020 base_addr=0x0000a601) pci_intx: intx=1 register_real_device: Real physical device 00:1a.0 registered successfuly! IRQ type = INTx dm-command: hot insert pass-through pci dev register_real_device: Assigning real physical device 0d:00.0 ... register_real_device: Enable MSI translation via per device option register_real_device: Disable power management pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0xd:0x0.0x0 pt_register_regions: IO region registered (size=0x00004000 base_addr=0xfbdfc000) pci_intx: intx=1 register_real_device: Real physical device 0d:00.0 registered successfuly! IRQ type = INTx dm-command: hot insert pass-through pci dev register_real_device: Assigning real physical device 00:1d.2 ... register_real_device: Enable MSI translation via per device option register_real_device: Disable power management pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x0:0x1d.0x2 pt_register_regions: IO region registered (size=0x00000020 base_addr=0x0000a881) pci_intx: intx=3 register_real_device: Real physical device 00:1d.2 registered successfuly! IRQ type = INTx dm-command: hot insert pass-through pci dev register_real_device: Assigning real physical device 02:00.0 ... register_real_device: Enable MSI translation via per device option register_real_device: Disable power management pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x2:0x0.0x0 pt_register_regions: IO region registered (size=0x00004000 base_addr=0xf3edc004) pt_register_regions: IO region registered (size=0x00000100 base_addr=0x0000bf01) pt_register_regions: Expansion ROM registered (size=0x00020000 base_addr=0xf3ee0000) pt_msi_setup: msi mapped with pirq 4f pci_intx: intx=1 register_real_device: Real physical device 02:00.0 registered successfuly! IRQ type = MSI-INTx dm-command: hot insert pass-through pci dev register_real_device: Assigning real physical device 0b:00.0 ... register_real_device: Enable MSI translation via per device option register_real_device: Disable power management pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0xb:0x0.0x0 pt_register_regions: IO region registered (size=0x02000000 base_addr=0xf8000000) pt_register_regions: IO region registered (size=0x08000000 base_addr=0xd800000c) pt_register_regions: IO region registered (size=0x04000000 base_addr=0xd400000c) pt_register_regions: IO region registered (size=0x00000080 base_addr=0x0000ef81) pt_register_regions: Expansion ROM registered (size=0x00080000 base_addr=0xfbc00000) pt_msi_setup: msi mapped with pirq 4e pci_intx: intx=1 register_real_device: Real physical device 0b:00.0 registered successfuly! IRQ type = MSI-INTx dm-command: hot insert pass-through pci dev register_real_device: Assigning real physical device 0b:00.1 ... register_real_device: Enable MSI translation via per device option register_real_device: Disable power management pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0xb:0x0.0x1 pt_register_regions: IO region registered (size=0x00004000 base_addr=0xfbcfc000) pt_msi_setup: msi mapped with pirq 4d pci_intx: intx=2 register_real_device: Real physical device 0b:00.1 registered successfuly! IRQ type = MSI-INTx pt_iomem_map: e_phys=e0000000 maddr=d8000000 type=8 len=134217728 index=1 first_map=1 pt_iomem_map: e_phys=e8000000 maddr=d4000000 type=8 len=67108864 index=3 first_map=1 pt_iomem_map: e_phys=ec000000 maddr=f8000000 type=0 len=33554432 index=0 first_map=1 vga s->lfb_addr = ef000000 s->lfb_end = ef800000 pt_iomem_map: e_phys=ef8a0000 maddr=fbdfc000 type=0 len=16384 index=0 first_map=1 pt_iomem_map: e_phys=ef8a4000 maddr=f3edc000 type=0 len=16384 index=0 first_map=1 pt_iomem_map: e_phys=ef8a8000 maddr=fbcfc000 type=0 len=16384 index=0 first_map=1 pt_ioport_map: e_phys=c100 pio_base=bf00 len=256 index=2 first_map=1 pt_ioport_map: e_phys=c200 pio_base=ef80 len=128 index=5 first_map=1 pt_ioport_map: e_phys=c2a0 pio_base=a600 len=32 index=4 first_map=1 pt_ioport_map: e_phys=c2c0 pio_base=a880 len=32 index=4 first_map=1 platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state. platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state. vga s->lfb_addr = ef000000 s->lfb_end = ef800000 pt_ioport_map: e_phys=ffff pio_base=a600 len=32 index=4 first_map=0 pt_pci_write_config: [00:04:0] Warning: Guest attempt to set address to unused Base Address Register. [Offset:30h][Length:4] pt_ioport_map: e_phys=c2a0 pio_base=a600 len=32 index=4 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=fbdfc000 type=0 len=16384 index=0 first_map=0 pt_pci_write_config: [00:05:0] Warning: Guest attempt to set address to unused Base Address Register. [Offset:30h][Length:4] pt_iomem_map: e_phys=ef8a0000 maddr=fbdfc000 type=0 len=16384 index=0 first_map=0 pt_ioport_map: e_phys=ffff pio_base=a880 len=32 index=4 first_map=0 pt_pci_write_config: [00:06:0] Warning: Guest attempt to set address to unused Base Address Register. [Offset:30h][Length:4] pt_ioport_map: e_phys=c2c0 pio_base=a880 len=32 index=4 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=f3edc000 type=0 len=16384 index=0 first_map=0 pt_ioport_map: e_phys=ffff pio_base=bf00 len=256 index=2 first_map=0 pt_iomem_map: e_phys=ef8a4000 maddr=f3edc000 type=0 len=16384 index=0 first_map=0 pt_ioport_map: e_phys=c100 pio_base=bf00 len=256 index=2 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=f8000000 type=0 len=33554432 index=0 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=d8000000 type=8 len=134217728 index=1 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=d4000000 type=8 len=67108864 index=3 first_map=0 pt_ioport_map: e_phys=ffff pio_base=ef80 len=128 index=5 first_map=0 pt_iomem_map: e_phys=ec000000 maddr=f8000000 type=0 len=33554432 index=0 first_map=0 pt_iomem_map: e_phys=e0000000 maddr=d8000000 type=8 len=134217728 index=1 first_map=0 pt_iomem_map: e_phys=e8000000 maddr=d4000000 type=8 len=67108864 index=3 first_map=0 pt_ioport_map: e_phys=c200 pio_base=ef80 len=128 index=5 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=fbcfc000 type=0 len=16384 index=0 first_map=0 pt_pci_write_config: [00:09:0] Warning: Guest attempt to set address to unused Base Address Register. [Offset:30h][Length:4] pt_iomem_map: e_phys=ef8a8000 maddr=fbcfc000 type=0 len=16384 index=0 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=fbcfc000 type=0 len=16384 index=0 first_map=0 pt_iomem_map: e_phys=ef8a8000 maddr=fbcfc000 type=0 len=16384 index=0 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=f8000000 type=0 len=33554432 index=0 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=d8000000 type=8 len=134217728 index=1 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=d4000000 type=8 len=67108864 index=3 first_map=0 pt_ioport_map: e_phys=ffff pio_base=ef80 len=128 index=5 first_map=0 pt_iomem_map: e_phys=ec000000 maddr=f8000000 type=0 len=33554432 index=0 first_map=0 pt_iomem_map: e_phys=e0000000 maddr=d8000000 type=8 len=134217728 index=1 first_map=0 pt_iomem_map: e_phys=e8000000 maddr=d4000000 type=8 len=67108864 index=3 first_map=0 pt_ioport_map: e_phys=c200 pio_base=ef80 len=128 index=5 first_map=0