[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] AW: [Xen-users] IPv6 with Bridge Modus
Sorry for my query! This machine is a dedicated server of my ISP. I don't have a fix mac for the IPv6 address, only for IPv4. Is your solution ok for my problem? Stefan > Can i use a IPv6 adress at XEN 4.0.1 of Debain 6? Should be possible. Bridge mode passes ethernet packets, and doesn't really care what's on top of it. > In my cfg I use this setting: > > > > vif = [ 'ip=85.10.210.154 46.4.44.162 2a01:4f8:130:9301::3' ] dump "ip" settings. It's useless in most setup anyway. Instead, you should explicitly specify mac (needed for lots of things, including persistent DHCP), and optionally bridge (to make it clear, in case you have multiple bridge) and vifname (to make it easier to identify from dom0). Something like vif = [ 'mac=00:16:3E:A8:31:24, bridge=eth0, vifname=ubuntu-e0' ] Then specify ipv6 address inside domU using usual OS methods (/etc/network/interfaces on Debian/Ubuntu) Most modern OS have IPv6 enabled by default, using link-local address. So if (for example) your dom0 bridge is using fe80::21e:bff:fe5e:9f58, and your domU only has one interface (eth0), you can test IPv6 conectivity from domU to dom0 using something like ping6 -I eth0 fe80::21e:bff:fe5e:9f58 -- Fajar _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |